
Cloudfridge
plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
Uniplug is an open-source printed circuit board by plantalytix, from the plantalytix/hardware repository on GitHub. It is a 2-layer board of 52.5 × 98.5 mm with 60 parts on 54 nets, routed with 393 tracks and 48 vias.
It is built around the ESP32-WROVER-E(4MB), IRM-03-12 and 1N4148W, with the ALF1P12 among its other parts. Its parts include 20 capacitors, 18 resistors, 6 connectors, 4 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.
USB-C Programming adapter for all plantalyix devices. Used to flash firmware directly onto the device using the RJ12 connector on the device
Fridgegrow 2.0, multiple boards.
Controller for EC Fans
Controller for dimmable LED lights
Smart socket
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1UF 25V | Capacitor_SMD:C_0402_1005Metric | C2, C5, C7, C8, C10, C11, C12, C13, C14 |
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R6, R8, R9, R10, R11, R12, R13, R14 |
| 7 | 100k | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R15, R17, R18 |
| 4 | 47pf | Capacitor_SMD:C_0402_1005Metric | C15, C16, C19, C20 |
| 4 | MountingHole | MountingHole:MountingHole_6.5mm | H1, H2, H3, H4 |
| 3 | Conn_01x01_Male | Connector_Pin:Pin_D1.3mm_L11.0mm | J3, J4, J5 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C6, C17 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C4, C18 |
| 2 | RJ10 | flexogrow:con_4p4c | J1, J6 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D1 |
| 1 | 31k6 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 3u3 | Inductor_SMD:L_Bourns-SRN4018 | L1 |
| 1 | 47p | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | ALF1P12 | flexogrow:ALFF1P12 | K1 |
| 1 | AP62200Z6-7 | Package_TO_SOT_SMD:SOT-563 | U3 |
| 1 | C_Polarized | flexogrow:supercap_p10 | C9 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D2 |
| 1 | ESP32-WROVER-E | Espressif:ESP32-WROVER-E | U1 |
| 1 | IRM-03-12 | Converter_ACDC:Converter_ACDC_MeanWell_IRM-03-xx_THT | PS1 |
| 1 | MCP7940N-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RJ12 | flexogrow:ASSMANN_A-2014-1-4-N-T-R | J2 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Bourns_Vertical_PEC12R-3xxxF-Sxxxx | SW1 |
| 1 | ssd1306 | flexogrow:ssd1306 | U2 |

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.

plantalytix/hardware
Hardware design documents for all plantalytix products. Created using KiCAD version 5 and 6.


OLIMEX/ESP32-POE
ESP32 IoT development board with 100Mb Ethernet and 802.3 Power Over Ethernet (POE)



Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf

espena/broadcast-clock
Digital precision studio/broadcast masterclock with WiFi configuration, acts as local NTP server with accurate GPS time sync.

martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth

It measures 52.5 × 98.5 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the ESP32-WROVER-E(4MB), IRM-03-12, 1N4148W and ALF1P12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the plantalytix/hardware repository on GitHub, at the commit this page was made from: the board is plantalytix-socket/uniplug.kicad_pcb and its schematic plantalyitx-programmer/fg_programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask plantalytix before reusing the design.