Skip to the content
2 layers61 × 71 mmBlinky, the printed circuit board in 3D
Size
61 × 71 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
17
Pads
57
Tracks, vias
119, 2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 Apr 2026
Updated
14 Apr 2026

Overview

Blinky is an open-source printed circuit board by Plaguery, from the Plaguery/blinkyboard repository on GitHub. It is a 2-layer board of 61 × 71 mm with 19 parts on 17 nets, routed with 119 tracks and 2 vias.

It is built around the CD4017BE and NE555P. Its parts include 10 diodes, 2 capacitors, 2 resistors, 2 ICs and 1 connector.

Main components

2

README

README.md

Description

This is my first time making a hardware project. 🫩 Had to learn a LOT! I created my blinky board in Kicad. For me, the hardest part was definitely figuring out how to use the software - a lot of the buttons felt hidden away. Also deciding how to route the PCB was quite difficult as well. My design is based off a cat, because they're cute. I wanted to do a rat at first, but making the design so complicated was tough. image

Parts

19
QtyValueFootprintReferences
10LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
10.01 uFCapacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mmC4
11 uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC3
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
150kPotentiometer_THT:Potentiometer_Vishay_T93YA_VerticalRV1
1CD4017BEfootprints:N16U3
1Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1LOGOLOGOa
1NE555PPackage_DIP:DIP-8_W7.62mmU1

Similar boards

  • 4 layers73.1 × 97.6 mmUlp daughterboard, the printed circuit board in 3D

    Ulp daughterboard

    Ismael034/ulp_daughterboard

    KiCad project files for a hardware CTF challenge used during the 2026 ULP CTF. The board is meant to be used with the ch32v203-dev development board.

    65 parts3
  • 2 layers98.2 × 98.1 mmBlinky, the printed circuit board in 3D

    Blinky

    Almo-ond-tech/Flower-Blinky

    I made a clover shaped pcb-board with LEDs

    25 parts
  • 2 layers160 × 25 mmKitt sweeper, the printed circuit board in 3D

    Kitt sweeper

    confusedCoyote/PCB-15cm-ruler

    A Printed Circuit Board ruler with some helpful hints

    26 partsGPL-3.0
  • 2 layers29.2 × 1.5 mmRGB Ringlight, the printed circuit board in 3D

    RGB Ringlight

    Darexsh/RGB-Ringlight

    Discrete RGB LED chaser ring powered by an NE555 astable clock and CD4017 counter. 24 LEDs arranged in a circular RGB sequence with variable chase speed.

    57 partsMIT
  • 2 layers76.2 × 41 mmLED chaser, the printed circuit board in 3D

    LED chaser

    emnguynhoccode/KiCad_LED_Chaser_202514301

    20 parts
  • 2 layers93.3 × 127.6 mmLogikKatze, the printed circuit board in 3D

    LogikKatze

    Lichtwerkstatt/ElectronicTinkerStuff

    A little Repository with all our small electronic projects

    33 partsMIT
  • 2 layers100 × 100 mmTach v1.0, the printed circuit board in 3D

    Tach v1.0

    maheen-ahmed1/OptoTACH

    Precision non-contact optical tachometer (0–9999 RPM/RPS) built entirely with discrete CMOS logic & 555 timers; no microcontroller, no firmware. Includes KiCad EDA, 3D model, Python simulation, and bench validation.

    99 parts
  • 2 layers51.9 × 45.4 mmNew ki cad, the printed circuit board in 3D

    New ki cad

    Sparkshiva007/LED-chaser-PCB

    A simple LED chaser circuit using a 555 timer and CD4017 IC, designed in KiCad. It lights up LEDs in sequence like a running light effect.

    28 partsMIT

Questions

How big is the Blinky PCB?

It measures 61 × 71 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Blinky use?

19 parts, built around the CD4017BE and NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Blinky KiCad files?

From the Plaguery/blinkyboard repository on GitHub, at the commit this page was made from: the board is blinky.kicad_pcb and its schematic blinky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Blinky design in my own project?

Its repository states no licence, so its author keeps all rights: ask Plaguery before reusing the design.