
T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs

Mini game console
Gamer is an open-source printed circuit board by pizzalover125, from the pizzalover125/sprig-lite repository on GitHub. It is a 2-layer board of 62.1 × 35.5 mm with 16 parts on 11 nets, routed with 74 tracks and 0 vias.
It is built around the ATTINY85-15M. Its parts include 4 resistors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A miniature version of the Sprig game console. Featuring the smallest, Arduino-compatible DIP processor and 3 push buttons!
NOTE: I am not using AliExpress because they are super unreliable and misdelivered my old package. Fourtanetly, I found it at my neighbor's house. They also just mark it as delivered when it is out for delivery. Also tariffs.
$57.14 w/ tax + shipping
$15.00 from Home Depot w/ tax
Total: $87.69
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | Button1, Button2, Button3 |
| 1 | ATtiny85 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Battery | Battery:BatteryHolder_Keystone_2462_2xAA | BT1 |
| 1 | DM-OLED096-636 | DM OLED096 636:MODULE_DM-OLED096-636 | OLED1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | SW_Wuerth_450301014042 | EG1218 Footprint Symbol:SW_EG1218 | PowerSwitch1 |

cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs




Guiimartinho/routeai
LLM-Powered Electronic Design Automation Platform for PCB Design

rallekralle11/Tinyreflow
Inspired by afterearthltd's reflow plate, but using fewer and simpler components.

aleh/MIDIMonkey
Listens to MIDI messages on one pin and triggers drums on the others

It measures 62.1 × 35.5 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pizzalover125/sprig-lite repository on GitHub, at the commit this page was made from: the board is PCB/gamer.kicad_pcb and its schematic PCB/gamer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pizzalover125 before reusing the design.