

Cardboard
an HBridge!
- Size
- 85 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 137
- Nets
- 93
- Pads
- 324
- Tracks, vias
- 520, 77
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Jun 2025
- Updated
- 6 Jun 2025
Overview
Cardboard is an open-source printed circuit board by pizzalover125, from the pizzalover125/hbridge repository on GitHub. It is a 2-layer board of 85 × 55 mm with 137 parts on 93 nets, routed with 520 tracks and 77 vias.
It is built around the PCF8574AP and SK6812. Its parts include 70 diodes, 60 switches and 2 ICs. It belongs with the RP2040 boards of this library.
Main components
2PCF8574AP
DIP-16-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascade and address expansion、Built-in LED driver I2C Interrupt Output Quasi-bidirectional output DIP-16 I/O Expanders ROHSHGSEMII/O ExpandersSK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdhbridge
Description
A basic H-Bridge circuit. Usually, they're used for motors. But we don't have those :(. So I just used 2 LEDs. Made by @pizzalover125
BOM
4x 6mm Push Buttons 1x 2032 Battery Holder 2x 5mm LEDs 2x THT Resistors 1x JLC PCB
Images
Parts
137| Qty | Value | Footprint | References |
|---|---|---|---|
| 60 | D | Diode_SMD:D_0402_1005Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44 |
| 60 | SW_Push | button:SW_B3U-1000P | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +44 |
| 10 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D51, D52, D53, D54, D55, D56, D57, D58, D59, D60 |
| 5 | LOGO | LOGO | G***, G***, G***, G***, G*** |
| 1 | PCF8574AP | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | XIAO-RP2040-DIP | xiao:XIAO-RP2040-DIP | U1 |
Similar boards
- 2 layers82 × 85 mm

- 2 layers79.5 × 160 mm

Europi main
AudioMorphology/Europi
Opensource sequencer software for Raspberry Pi equipped with Eurorack-compatible hardware
90 parts103 - 2 layers77.7 × 166.3 mm

Delta pico
AaronC81/delta-pico
Powerful scientific calculator based on the Raspberry Pi Pico
84 parts57MIT - 2 layers36 × 36 mm

- 2 layers50.8 × 74.9 mm

- 2 layers65 × 56 mm

MiniTeleskop
cutec-chris/PiScope
Goto Telescope with Raspberry PI HQ Camera and exchangable Objective Holders for DSLR Objectives
41 parts3 - 2 layers50.4 × 50.4 mm

Bluepill ethernet
kellerkindt/bluepill_sensor
Bluepill stm31f103 ethernet sensor extension board with SW written in Rust
47 parts3Apache-2.0 - 2 layers126 × 59.5 mm

VFO BFO Si5351
loscorpione/VFO-BFO-HF-ESP32-Si5351
VFO & BFO con Si 5351 gestito da ESP32 devkit V1 per la gamma di frequenze HF, da 1 a 30 MHZ
34 parts3
Questions
How big is the Cardboard PCB?
It measures 85 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cardboard use?
137 parts, built around the PCF8574AP and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cardboard KiCad files?
From the pizzalover125/hbridge repository on GitHub, at the commit this page was made from: the board is cardboard.kicad_pcb and its schematic cardboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cardboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask pizzalover125 before reusing the design.