

Makropad
A macro pad
- Size
- 82 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 51
- Pads
- 221
- Tracks, vias
- 528, 65
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Jan 2025
- Updated
- 14 Mar 2025
Overview
Makropad is an open-source printed circuit board by Badbird5907, from the Badbird5907/makropad repository on GitHub. It is a 2-layer board of 82 × 85 mm with 67 parts on 51 nets, routed with 528 tracks and 65 vias.
It is built around the PCF8574AP and SK6812. Its parts include 28 diodes, 16 capacitors, 12 switches, 2 resistors and 2 ICs. It belongs with the keyboards and input boards of this library.
Main components
2PCF8574AP
DIP-16-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascade and address expansion、Built-in LED driver I2C Interrupt Output Quasi-bidirectional output DIP-16 I/O Expanders ROHSHGSEMII/O ExpandersSK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdMakropad
Makropad is my attempt at a custom macropad, inspired by the Stream Deck Plus. It uses Kaith Choc v2 switches, 2 encoders, powered by a RP2040.
A user-friendly BOM can be found here
Features
- 2 rotary encoders
- 10 backlit keys
- 128x32 OLED display
Screenshots
3D Renders of the Cherry MX switch version (made with Shapr3D):
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 12 | D | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 10 | SK6812 | neopixel.petty:SK6812MINI-E | D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 |
| 10 | SW_Push_45deg | Components:SW_Kailh_Choc_V2 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 |
| 6 | SK6812 | Components:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D23, D24, D25, D26, D27, D28 |
| 5 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4, MH5 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | RotaryEncoder_Switch | Components:encoder | SW11, SW12 |
| 1 | Conn_01x04 | Components:4pin | J2 |
| 1 | MOUDLE-SEEEDUINO-XIAO | Components:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U2 |
| 1 | OLED_DISPLAY | Components:SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 1 | PCF8574A | Components:SOIC127P1032X265-16N | U1 |
Similar boards
- 2 layers85 × 55 mm

- 2 layers79.5 × 160 mm

Europi main
AudioMorphology/Europi
Opensource sequencer software for Raspberry Pi equipped with Eurorack-compatible hardware
90 parts103 - 2 layers77.7 × 166.3 mm

Delta pico
AaronC81/delta-pico
Powerful scientific calculator based on the Raspberry Pi Pico
84 parts57MIT - 2 layers36 × 36 mm

- 2 layers50.8 × 74.9 mm

- 2 layers65 × 56 mm

MiniTeleskop
cutec-chris/PiScope
Goto Telescope with Raspberry PI HQ Camera and exchangable Objective Holders for DSLR Objectives
41 parts3 - 2 layers50.4 × 50.4 mm

Bluepill ethernet
kellerkindt/bluepill_sensor
Bluepill stm31f103 ethernet sensor extension board with SW written in Rust
47 parts3Apache-2.0 - 2 layers126 × 59.5 mm

VFO BFO Si5351
loscorpione/VFO-BFO-HF-ESP32-Si5351
VFO & BFO con Si 5351 gestito da ESP32 devkit V1 per la gamma di frequenze HF, da 1 a 30 MHZ
34 parts3
Questions
How big is the Makropad PCB?
It measures 82 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Makropad use?
67 parts, built around the PCF8574AP and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Makropad KiCad files?
From the Badbird5907/makropad repository on GitHub, at the commit this page was made from: the board is PCB/makropad.kicad_pcb and its schematic PCB/makropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Makropad design in my own project?
Its repository states no licence, so its author keeps all rights: ask Badbird5907 before reusing the design.