Skip to the content
2 layers100 × 50 mmPlexo v-0-rev a, the printed circuit board in 3D

Plexo v-0-rev a

piruetasxyz/plexo1

Multiplexor de 6 potenciómetros para Raspberry Pi Pico.

Size
100 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
12
Pads
68
Tracks, vias
107, 9
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Oct 2026
Updated
13 Oct 2026

Overview

Plexo v-0-rev a is an open-source printed circuit board by piruetasxyz, from the piruetasxyz/plexo repository on GitHub. It is a 2-layer board of 100 × 50 mm with 17 parts on 12 nets, routed with 107 tracks and 9 vias.

It is built around the 74HC4051. Its parts include 7 capacitors, 1 IC and 1 connector.

Main components

1

README

README.md

plexo

Multiplexor de 6 potenciómetros para Raspberry Pi Pico.

Usa un 74HC4051 (multiplexor analógico de 8 canales) para leer 6 potenciómetros con una sola entrada analógica (ADC) de la Pico y 3 pines digitales de selección.

Componentes

ReferenciaValorEncapsuladoNotas
U174HC4051SOIC-16LCSC C9386
RV1–RV610k lineal (B10K)9 mm vertical, tipo Alpha RV09Se sueldan a mano
C1–C6100 nF X7R0805Filtro en cada potenciómetro, LCSC C49678
C7100 nF X7R0805Desacople de U1, LCSC C49678
J3Conector hembra 1×62,54 mmVer conexiones

Conexiones

J3 es un conector hembra de 6 pines, paso 2,54 mm.

PinSeñalPico (sugerido)
13V33V3(OUT), pin 36
2salida (COM del multiplexor)GP26 / ADC0, pin 31
3GNDAGND, pin 33
4S0GP2, pin 4
5S1GP3, pin 5
6S2GP4, pin 6

Conviene conectar la tierra de plexo al pin AGND de la Pico (pin 33) en vez de una GND digital: las lecturas salen con menos ruido.

No alimentes los potenciómetros desde ADC_VREF. En la Pico ese pin tiene una resistencia de 200 Ω en serie, y los 6 potenciómetros consumen unos 2 mA en total, lo que hace caer el voltaje unos 0,4 V.

Tabla de selección

S2S1S0CanalLectura
000A0potenciómetro 1
001A1potenciómetro 2
010A2potenciómetro 3
011A3potenciómetro 4
100A4potenciómetro 5
101A5potenciómetro 6
110A6GND (lee 0)
111A7GND (lee 0)

Los canales A6 y A7 están conectados a tierra. Sirven para revisar cuánto mide el "cero" del ADC.

Ejemplo en MicroPython

python
from machine import ADC, Pin
import time

seleccion = [Pin(2, Pin.OUT), Pin(3, Pin.OUT), Pin(4, Pin.OUT)]  # S0, S1, S2
salida = ADC(26)

def leer_potenciometro(canal):
    for bit, pin in enumerate(seleccion):
        pin.value((canal >> bit) & 1)
    time.sleep_us(10)  # tiempo para que se estabilice el multiplexor
    salida.read_u16()  # se descarta la primera lectura
    return salida.read_u16()

while True:
    valores = [leer_potenciometro(canal) for canal in range(6)]
    print(valores)
    time.sleep_ms(50)

read_u16() entrega valores entre 0 y 65535.

Notas

  • Si el valor de un potenciómetro baja al girarlo en sentido horario, el potenciómetro tiene los pines al revés. Se puede invertir en el código con 65535 - valor.
  • Los potenciómetros genéricos de 9 mm (por ejemplo de AliExpress) varían un poco en la posición de las patas de montaje. Antes de mandar a fabricar, imprime el PCB a escala 1:1 y prueba que calce uno real.

Archivos

  • plexo-v-0-rev-a/: proyecto de KiCad (esquemático y PCB).

Parts

17
QtyValueFootprintReferences
7100nCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C5, C6, C7
610kPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV1, RV2, RV3, RV4, RV5, RV6
2MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2
174HC4051Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU1
1Screw_Terminal_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ3

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 4 layers113.5 × 105.5 mmMultistepper, the printed circuit board in 3D

    Multistepper

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    243 parts208
  • 4 layers230.7 × 97.8 mmTako, the printed circuit board in 3D

    Tako

    ssbb/tako

    34 key EC split keyboard

    146 parts200MIT
  • 2 layers100 × 45.3 mmOpeNITHM, the printed circuit board in 3D

    OpeNITHM

    Yona-W/OpeNITHM

    Open-Source hardware Seaurchin/Qnithm/Laverita controller

    26 parts196GPL-3.0
  • 4 layers100 × 100 mmPCBA OCTV, the printed circuit board in 3D

    PCBA OCTV

    intechstudio/grid-hardware

    403 parts59GPL-3.0
  • 4 layers227.3 × 85 mmLe capybara, the printed circuit board in 3D

    Le capybara

    sporkus/le_capybara_keyboard

    Capactive sensing (EC) pcb for Le Chiffre keyboard

    118 parts58CERN-OHL-W-2.0
  • 2 layers132 × 94 mmHelix niz, the printed circuit board in 3D

    Helix niz

    ginjake/ec_helix_build

    商用利用したい場合は twitter @sirojake にご相談ください please contact me for commercial use. ## developer ginjake

    200 parts40
  • 2 layers138.1 × 114.3 mmSilakka54-HE, the printed circuit board in 3D

    Silakka54-HE

    Hanthebot/silakka54-HE

    54 key column staggered split, with hall effect

    77 parts32GPL-3.0

Questions

How big is the Plexo v-0-rev a PCB?

It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Plexo v-0-rev a use?

17 parts, built around the 74HC4051. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Plexo v-0-rev a KiCad files?

From the piruetasxyz/plexo repository on GitHub, at the commit this page was made from: the board is plexo-v-0-rev-a/plexo-v-0-rev-a.kicad_pcb and its schematic plexo-v-0-rev-a/plexo-v-0-rev-a.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Plexo v-0-rev a design in my own project?

Its repository states no licence, so its author keeps all rights: ask piruetasxyz before reusing the design.