Skip to the content
2 layers21.3 × 52 mmPideck, the printed circuit board in 3D
Size
21.3 × 52 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
51
Pads
116
Tracks, vias
248, 32
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Mar 2025
Updated
11 Jul 2025

Overview

Pideck is an open-source printed circuit board by piraticus, from the piraticus/piDeck repository on GitHub. It is a 2-layer board of 21.3 × 52 mm with 11 parts on 51 nets, routed with 248 tracks and 32 vias.

It is built around the TXS0108EPWR. Its parts include 5 capacitors, 3 connectors, 1 resistor and 1 IC.

Main components

1

README

README.md

piDeck

Parts

11
QtyValueFootprintReferences
31uFCapacitor_SMD:C_0603_1608MetricC1, C2, C3
20.1uFCapacitor_SMD:C_0603_1608MetricC4, C5
2Conn_01x20_SocketConnector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1, J2
110kResistor_SMD:R_0603_1608MetricR1
1AP7312-1828W6-7Package_TO_SOT_SMD:SOT-23-6LDO1
1BM20B_0.8_-34DS-0.4V_53_HIROSE_BM20B_0.8_-34DS-0.4V_53_:HIROSE_BM20B_0.8_-34DS-0.4V_53_J3
1TXS0108EPWRPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU3

More from piraticus/piDeck

1
  • 2 layers60.1 × 97.1 mmPideck, the printed circuit board in 3D

    Pideck

    piraticus/piDeck

    43 parts

Similar boards

  • 12 layers180 × 150 mmMarble, the printed circuit board in 3D

    Marble

    BerkeleyLab/Marble

    Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.

    1,006 parts35
  • 4 layers70 × 53.3 mmCamboard uno q, the printed circuit board in 3D

    Camboard uno q

    RevLmt/camboard-uno-q

    shield for uno q

    15 parts7CERN-OHL-P-2.0
  • 4 layers85 × 56 mmV link hat, the printed circuit board in 3D

    V link hat

    BoostedMoose/v-link-hat

    Official repository of the V-Link HAT

    96 parts6
  • 6 layers100 × 100 mmImx8x eps leviathan v2, the printed circuit board in 3D

    Imx8x eps leviathan v2

    BroncoSpace-Lab/scales-hardware

    Hardware design files for the Spacecraft Compartmentalized Autonomous Learning and Edge Computing System (SCALES)

    449 parts6
  • 2 layers100 × 100 mmArrow deca retro cape, the printed circuit board in 3D

    Arrow deca retro cape

    somhi/DECA_retro_cape_2

    Retro cape (addon) for DECA FPGA

    79 parts5
  • 4 layers86 × 69 mmZYNQ7000 MINIMB, the printed circuit board in 3D

    ZYNQ7000 MINIMB

    dj140/ZYNQ7020_Development_Board

    156 parts2
  • 4 layers92 × 56 mmREIN R1, the printed circuit board in 3D

    REIN R1

    rein-baremetal/REIN_R1_KiCad

    Dual-MCU baremetal embedded development board featuring high-speed QSPI storage, hardware USB hub, and flexible power management. Open for PCB trace routing collaboration

    177 parts2
  • 4 layers240 × 90.5 mmBILLEE Rover Control Module V1, the printed circuit board in 3D

    BILLEE Rover Control Module V1

    BILLEE-BroncoSTAR/billee-hardware-2027

    Hardware and firmware Repository for BILLEE URC 2027

    276 parts1MIT

Questions

How big is the Pideck PCB?

It measures 21.3 × 52 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pideck use?

11 parts, built around the TXS0108EPWR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pideck KiCad files?

From the piraticus/piDeck repository on GitHub, at the commit this page was made from: the board is electronics/keyboard_hat/pideck.kicad_pcb and its schematic electronics/keyboard_hat/pideck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pideck design in my own project?

Its repository states no licence, so its author keeps all rights: ask piraticus before reusing the design.