Skip to the content
4 layers112.7 × 67.8 mmEverestCM4, the printed circuit board in 3D

BelayBox reference hardware

Size
112.7 × 67.8 mm
Copper layers
4
Thickness
1.64 mm
Parts
220
Nets
302
Pads
994
Tracks, vias
3,400, 540
Pours
7
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Nov 2022
Updated
26 Aug 2024

Overview

EverestCM4 is an open-source printed circuit board by PionixPublic, from the PionixPublic/reference-hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 112.7 × 67.8 mm with 220 parts on 302 nets, routed with 3,400 tracks and 540 vias.

It is built around the ADM3485EARZ, SN65HVD230D and TPS54394RSA, with the PCF85063ATL/1, PI3USB102ZLEX and SM3.3H-TP among its other parts. Its parts include 68 resistors, 59 capacitors, 19 ICs, 17 connectors and 8 diodes. It belongs with the Raspberry Pi (Linux) boards of this library.

Main components

10

README

README.md

Yeti and Yak hardware reference design

This repository contains two reference board designs meant to get started with EVerest with a fully working hardware and software solution, entirely open source. They are meant to be developer friendly, not mass production friendly, keep that in mind when using this as a start to design a product. They are designed with KiCAD 6 (https://www.kicad.org/), make sure you use the latest version of KiCAD.

Yeti

alt text

Three phase power board reference design for a full 22kW AC charger. This board may be used in two ways:

Using Yeti as a standalone charger

By default Yeti is a complete AC charger for electric vehicles supporting IEC-61851-1 / SAE J1772 basic charging. It contains the complete charging logic and will charge the car immediately when connected. The UART can optionally be used to observe the status and have limited control over the charging session (such as pause/resume and current limit adjustments). This mode is called "high level control" mode in the yeti firmware. Typical application would be a simple (non-smart) home charger.

Using Yeti as a power path for a smart charger

The Yeti firmware can be switched to "low level" control mode with a UART command. In this mode the charging logic must be external, only the very basic state machine for states A-F remains in the microcontroller. This basic state machine is essential for electrical safety as it is the actual decision point for switching power on/off etc.

In high level control mode Yeti an external board sets the PWM dutycycle and reads back the control pilot events. This is the mode used by the open-source EVerest stack to also enable HLC (high level charging, aka ISO15118-2/-20/DIN SPEC70121). Automatic switching back to "high level mode" can be implemented to fall back to emergency free charging in case the higher level linux board fails.

Yeti features

Yeti HW has the following features:

  • Control Pilot (CP) signal generation in compliance with IEC61851-1/SAE J1772. The output may optionally be disabled (floating, high impedance)
  • CP signal sampling in sync with PWM
  • onboard 35A relais for three phase power switching with mirror contacts for welding detection. PWM control for coil voltage to reduce power dissipation when holding
  • seperate switching of 1ph (neutral and L1) or 3ph (N, L1, L2, L3). This feature is useful with solar excess power charging to charge below 4.3kW, but local regulations may require one mechanical switch for all phases instead of two
  • onboard 3ph shunt based power metering with isolated ADCs. Supports up to 8Khz sampling and measures voltages, currents, power and frequency of all phases plus neutral. Energy counter for unidirectional is implemented in yeti firmware, can be extended to bidirectional counting.
  • Phase rotation direction detection
  • Fast interrupt driven over current detection
  • Generation of 3.3V TTL square signal that is synchronized to L1 zero crossings (for PLC modem)
  • GFCI module for 5/6mA DC ground faults and 20/30mA AC faults. Outputs measured leakage current for telemetry
  • 10 pin connector for high level board with control UART
  • external connector for a small SPI LCD (useful if it is used as a standalone charger)
  • external RS485/ModBus e.g. for external power meters
  • onboard FRAM for power meter
  • external GPIOs with support to measure PTCs/NTCs as temperature sensors in the plug
  • 32A/16A selection jumper
  • TagConnect TC2030 port for STM32 programming and debugging
  • Power input: onboard 110V/230V -> 12V supply or external 12V input. The onboard ACDC can supply the high level yak board as well.All other voltages are generated on board.
  • 12V/1A motor lock driver (normally not populated)

It is designed for 4kV reinforced isolation and corresponding creepages to meet IEC61851-1 electrical safety requirements. The isolation barrier is the big white strip, the high level board is therefore in the low voltage domain with reinforced isolation to the high voltage section. If you build boards your self note the special layer stackup requirements for that.

Yeti's STM32 firmware can be found here: https://github.com/PionixPublic/yeti-firmware

Yak

alt text

Yak is a high level control board for EV charging stations. It supports both AC and DC applications. It is based on Raspberry Pi Compute Module (CM4) running Linux. It has the following features:

  • CM4 module (quad core ARM Cortex A72, 1-8GB RAM, embedded flash or external uSD card)
  • 10 pin connector for direct connection to Yeti board
  • Custom connector for stackable HDMI display available from Pionix (1000 nits sunlight readable, capacitive touch)
  • RTC with backup battery
  • PLC GreenPhy modem for HLC communication with car (aka ISO15118-2/-20/DIN SPEC70121)
  • UART/power connector for popular PN532 based RFID modules
  • RS485/ModBus (e.g. for power meters, isolation monitors etc)
  • CAN bus (e.g. for DC power supplies)
  • Ethernet
  • Wireless LAN 2.4Ghz/5Ghz and Bluetooth 5 (on the CM4)
  • USB ports (e.g. for 4G/5G connection, ...)
  • USB client port to flash the EMMC of CM4
  • External GPIOs

For the EVerest software stack on the Yak board see its main repository here: https://github.com/EVerest/everest

Pre built images for the Yak board based on raspian for Pionix BelayBox are available from Pionix: contact@pionix.de

Yak/Yeti Wiring

A word of warning: Working with high voltages (e.g. 400V AC or 1000V DC) is dangerous and potentially lethal. The following setups are for experimental use by trained professionals in controlled lab space only! There is risk of death, fire and more, so don't do this unless you know exactly what you are doing. We don't take any responsibility, these instructions are incomplete and may be wrong, you have been warned!

AC Charging

Yeti was designed for AC charging, so wiring for AC is quite easy. You can use both single and three phase configurations with neutral. If you have 220V in the US with no neutral you can wire L1 to L1 and L2 to N. PE must always be connected.

alt text

DC Charging

Yak was designed for both AC and DC applications. Even though Yeti was designed for AC only, it can still be used to evaluate DC charging. Keep in mind that this is a bare minimum lab test setup and for a real product more safety and protection features need to be added.

From the Yeti the CP signalling is used as it is the same for DC and AC. The power relais on the Yeti are used as driver relais for the big DC contactor's coil voltage (typically 12 or 24V). Since no AC is connected to Yeti the onboard 12V power supply does not work and external 12V needs to be fed into the barrel connector to power both Yak and Yeti. PE always has to be connected to the Yeti's PE input!

The complete DC power path is added externally. The AC/DC module (or stack of modules) is controlled by EVerest directly from Yak via CAN bus. Isolation monitors and power meters are typically connected to the ModBus/RS485 port of the Yak. Depending on your setup the components may use different busses.

The Yeti firmware is the same as for AC. In the EVerest configuration EvseManager needs to be configured for DC charging mode and the driver modules for all exteral components need to be loaded.

alt text

Pionix Belay Box

A complete charger design based on those two boards is available from Pionix. You can download the 3D files via our Fusion360 project: https://a360.co/45erK90.

You can find the manual for the BelayBox here: https://pionix.com/user-manual-belaybox

For assembly instructions and some troubleshooting information, please see here: https://everest.github.io/nightly/hardware/pionix_belay_box.html#pionix-belaybox

If you have already purchased a BelayBox and need hardware-related help, see our support page to create an issue: https://support.pionix.com/

For software-related issues all around EVerest, the active community is willing to help you on the EVerest mailing list (https://lists.lfenergy.org/g/everest) or via Zulip (https://lfenergy.zulipchat.com/).

In case you need further parts for the BelayBox, visit the Pionix online shop: https://shop.pionix.com/

alt text

Pionix DC Test stand

This is how a 30kW lab prototype for DC charging evaluation can look like, contact us via contact@pionix.de to get more information.

alt text

Parts

220
QtyValueFootprintReferences
27100nFCapacitor_SMD:C_0603_1608MetricC4, C10, C16, C17, C18, C19, C20, C21, C22, C25, C26, C32, C34, C37, C43, C44 +11
24TestPointTestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mmTP3, TP10, TP11, TP12, TP13, TP14, TP15, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP35, TP36 +8
17DNFResistor_SMD:R_0603_1608MetricR2, R10, R18, R20, R21, R23, R24, R34, R45, R46, R57, R59, R63, R64, R65, R66 +1
1310uFCapacitor_SMD:C_0805_2012MetricC1, C3, C11, C13, C14, C15, C24, C27, C33, C36, C40, C53, C64
110RResistor_SMD:R_0603_1608MetricR1, R11, R37, R40, R47, R52, R53, R55, R56, R62, R68
1010KResistor_SMD:R_0603_1608MetricR5, R6, R9, R28, R29, R30, R31, R32, R33, R48
8FiducialFiducial:Fiducial_1mm_Mask3mmFID1, FID2, FID3, FID4, FID5, FID6, FID7, FID8
62.2KResistor_SMD:R_0603_1608MetricR3, R4, R14, R15, R16, R17
418pFCapacitor_SMD:C_0603_1608MetricC2, C5, C48, C49
41KResistor_SMD:R_0603_1608MetricR7, R19, R22, R35
4220Resistor_SMD:R_0603_1608MetricR41, R42, R43, R44
422uFCapacitor_SMD:C_1206_3216MetricC31, C38, C41, C42
4470RResistor_SMD:R_0603_1608MetricR25, R26, R49, R51
4DNFCapacitor_SMD:C_0603_1608MetricC30, C39, C59, C60
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_ISO7380_PadH1, H2, H3, H4
374LVC1G07QW5-7Package_TO_SOT_SMD:SOT-23-5U7, U8, U10
3SP3003-02XJPionix:SC70-5U1, U3, U16
2120RResistor_SMD:R_0603_1608MetricR50, R58
212K 1%Resistor_SMD:R_0603_1608MetricR8, R27
21uCapacitor_SMD:C_0603_1608MetricC46, C47
21uFCapacitor_SMD:C_0603_1608MetricC23, C35
22.7nF 2kVCapacitor_SMD:C_1210_3225MetricC28, C29
222.1KResistor_SMD:R_0603_1608MetricR39, R61
2510K 1%Resistor_SMD:R_0603_1608MetricR12, R13
2AP22804AW5-7Package_TO_SOT_SMD:SOT-23-5U4, U13
2Conn_01x01Pionix:S2711-46R_SheildClipJ12, J16
2SM3.3H-TPPackage_TO_SOT_SMD:SOT-23D5, D6
1100uFCapacitor_SMD:CP_Elec_6.3x3C12
11206L050Fuse:Fuse_1206_3216MetricF2
1124KResistor_SMD:R_0603_1608MetricR60
116MHzCrystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY3
11MResistor_SMD:R_0603_1608MetricR36
12.2uHInductor_SMD:L_Vishay_IHLP-1616L4
124MHzCrystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY1
12A/0.05DCRInductor_SMD:L_0402_1005MetricL2
12A/0.05DCRInductor_SMD:L_0603_1608MetricL3
14.7uHInductor_SMD:L_Vishay_IHLP-2525L5
152901-0374Pionix:Molex_SlimStack_52901-0374_2x15_P0.635mm_VerticalJ4
1680RResistor_SMD:R_0603_1608MetricR54
1690-008-221-904Pionix:MOLEX_USB_67298-4090J2
173.2KResistor_SMD:R_0603_1608MetricR38
1ADM3485EARZPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU21
1ComputeModule4CM4IO:Raspberry-Pi-4-Compute-ModuleModule2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ7
1Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ17
1Conn_01x03Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ6
1Conn_02x07_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_VerticalJ5
1Conn_02x10_Odd_EvenPionix:WE62702021621_PinSocket_2x10_P1.27mm_VerticalJ15
1GBLC03CDiode_SMD:D_SOD-323D9
1GPIO0Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ11
1GPIO2Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ9
1GPIOsConnector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJ10
1LED GreenLED_SMD:LED_0603_1608MetricD2
1LED RedLED_SMD:LED_0603_1608MetricD3
1LOGOPionix:pionix-logoG***
1MCP2515-xSOPackage_SO:SOIC-18W_7.5x11.6mm_P1.27mmU17
1ML-621S_DNPionix:Panasonic-ML-621S_DN-0-0-MFGBT1
1Micro_SD_Card_DetCM4IO:SDCARD_MOLEX_503398-1892J8
1Molex-93628-3721Pionix:RJ45_Molex_93628-3721_HorizontalU6
1PCF85063ATLPionix:NXP_Semiconductors-SOT1197-1-02_2016-0-MFGU5
1PI3USB102ZLEXPionix:SW_PI3USB102ZLEXU12
1PLC_RED_Beet_EPionix:PLC_RED_BeetU14
1PLC_Stamp_mini_2Pionix:PLC_Stamp_mini_2U15
1RB160MM-30TFTRDiode_SMD:D_SOD-123FD1
1RESD1CANYFHT116Package_TO_SOT_SMD:SOT-23D8
1SLB9670Package_DFN_QFN:VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mmU9
1SN65HVD230Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU22
1SS32+Diode_SMD:D_SMCD4
1SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2SW1
1TPS54394RSAPackage_DFN_QFN:QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_ThermalViasU11
1USB2514_48pinPionix:QFN-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mmU2
1USB_OTGCM4IO:USB_Micro-B_EDAC_UCON00686J1
1WR-MPC3-Male-THT-10Pionix:66201021022J3
1WR-MPC3-Male-THT-4Pionix:66200421022J13
1WR-MPC3-Male-THT-6Pionix:66200621022J14
1X32K768S301Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY2
1YT-35636Pionix:YT-35636T1

More from PionixPublic/reference-hardware

1
  • 8 layers163.5 × 123.5 mmYeti, the printed circuit board in 3D

    Yeti

    PionixPublic/reference-hardware

    BelayBox reference hardware

    278 parts70CERN-OHL-P-2.0

Similar boards

  • 4 layers233.4 × 147.3 mmOpenPLC Hardware, the printed circuit board in 3D

    OpenPLC Hardware

    gasiepgodoy/Open-Source-PLC

    Open Source Programmable Logic Controller (Hardware and Software). Based on the Master of Science in Electrical Engineering of João Vitor Rocha Santana

    494 parts2
  • 6 layers120.5 × 72.9 mmDriver Inductor, the printed circuit board in 3D

    Driver Inductor

    Alexandr-Filatov/Inductor-80kWt

    99 parts
  • 6 layers189.7 × 92 mmAdapter, the printed circuit board in 3D

    Adapter

    Alexandr-Filatov/Three-Phase-80kWt

    291 parts
  • 4 layers90 × 96 mmIan OBC Recreation, the printed circuit board in 3D

    Ian OBC Recreation

    UChicago-Space-Program/pulse-hardware

    This is the central repository for documents related to PULSE-A hardware development.

    43 parts1
  • 2 layers55 × 58 mmLAM RPI DMX, the printed circuit board in 3D

    LAM RPI DMX

    b4ck5p4c3/lambium

    🏭 Series of weird space automation devices

    16 partsCERN-OHL-S-2.0
  • 4 layers71.5 × 71.5 mmElixir, the printed circuit board in 3D

    Elixir

    golioth/elixir-hw

    An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!

    249 parts36CERN-OHL-P-2.0
  • 4 layers28 × 34.7 mmWearable, the printed circuit board in 3D

    Wearable

    theheraldproject/herald-hardware

    Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

    82 parts6

Questions

How big is the EverestCM4 PCB?

It measures 112.7 × 67.8 mm and has 4 copper layers, 1.64 mm thick.

What parts does the EverestCM4 use?

220 parts, built around the ADM3485EARZ, SN65HVD230D, TPS54394RSA and PCF85063ATL/1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EverestCM4 KiCad files?

From the PionixPublic/reference-hardware repository on GitHub, at the commit this page was made from: the board is Yak/everestCM4.kicad_pcb and its schematic Yak/CM4_GPIO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EverestCM4 design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).