
8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

Romboard is an open-source printed circuit board by pinnet, from the pinnet/a1541repair repository on GitHub. It is a 2-layer board of 58.4 × 38.1 mm with 11 parts on 37 nets, routed with 106 tracks and 0 vias.
It is built around the 74LS02PC and 74LS04PC. Its parts include 5 ICs, 2 capacitors and 2 resistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2 |
| 2 | 10uF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2 |
| 1 | 2364H | romboard:2364H | U3 |
| 1 | 2364L | romboard:2364L | U4 |
| 1 | 27C512 | Package_DIP:DIP-28_W15.24mm_Socket | U5 |
| 1 | 74LS02 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | B1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | A14 |
| 1 | B2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | A15 |

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.


danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts

RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G

hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

btb/80ColumnCard
An Apple II 80-Column Card. Based on the Videx Videoterm


It measures 58.4 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the 74LS02PC and 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pinnet/a1541repair repository on GitHub, at the commit this page was made from: the board is romboard/romboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pinnet before reusing the design.