4 layers180 × 120 mm
MG ZS V2
damienmaguire/MG-EV-Inverter
Reverse engineering of the drive motor and inverter used in MG Electric Vehicles
177 parts17GPL-3.0
2 layers87.6 × 25.4 mm
Pingboard Prototype
PingTechGmbH/PingBoard3Mini keyboard with just four keys for core macros.
- Size
- 87.6 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 40
- Pads
- 126
- Tracks, vias
- 192, 18
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Apr 2022
- Updated
- 17 Jan 2023
Overview
Pingboard Prototype is an open-source printed circuit board by PingTechGmbH, from the PingTechGmbH/PingBoard repository on GitHub, published under the MIT licence. It is a 2-layer board of 87.6 × 25.4 mm with 23 parts on 40 nets, routed with 192 tracks and 18 vias.
It is built around the 74LVC1G10DW. Its parts include 7 resistors, 4 diodes, 4 switches, 3 capacitors and 3 ICs. It belongs with the keyboards and input boards of this library.
Main components
1README
README.mdPingBoard
Mini keyboard with just four keys for core macros.
Building the firmware
with Platform.io
Install platformio with
pip3 install platformioOr pick any other installation method from https://docs.platformio.org/en/latest/core/installation.html
Review https://docs.platformio.org/en/latest//faq.html#platformio-udev-rules and install the udev rules.
To refresh your groups inside a running session without logging in, you can use:
su - $USERAfter doing this (or a reboot), you can then flash the firmware with:
cd Prototype/PlatformioProjekt
platformio run -t uploadLicense
This project is published under the MIT license, see LICENSE for details.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R7 |
| 4 | LED_ARGB | LED_SMD:LED_ASMB-KTF0-0A306 | D1, D2, D3, D4 |
| 4 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 520 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6 |
| 2 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1, J2 |
| 2 | TLC59108xPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1, U2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 74LVC1G10 | Package_TO_SOT_SMD:SOT-363_SC-70-6_Handsoldering | U3 |
Questions
How big is the Pingboard Prototype PCB?
It measures 87.6 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pingboard Prototype use?
23 parts, built around the 74LVC1G10DW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pingboard Prototype KiCad files?
From the PingTechGmbH/PingBoard repository on GitHub, at the commit this page was made from: the board is Prototype/PCB/Pingboard_Prototype.kicad_pcb and its schematic Prototype/PCB/Pingboard_Prototype.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pingboard Prototype design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers141 × 56.9 mm
- 2 layers141 × 56.9 mm
- 6 layers99.7 × 63.9 mm
Nescart
Keitark/fc-rom-vomitter
Wi-Fi NROM development cartridge for Famicom: ESP32-S3, SRAM, KiCad, firmware, fabrication evidence, and an experimental NES variant.
84 partsMIT - 2 layers17.4 × 51.4 mm
Retro uart
rkujawa/retro-uart
Retro-fitting 16C750E into DIP socket! For all your retro hardware project needs.
17 partsGPL-3.0 - 2 layers233.4 × 280 mm
- 4 layers108.7 × 111.8 mm
- 2 layers65 × 56 mm
