Skip to the content
2 layers64 × 27 mmChargeControl, the printed circuit board in 3D

ChargeControl

pilotniq/MJoulnir2

Hardware and software for the control system of a full size electric boat.

Size
64 × 27 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
21
Pads
104
Tracks, vias
256, 12
Pours
5
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 Jan 2021
Updated
26 May 2024

Overview

ChargeControl is an open-source printed circuit board by pilotniq, from the pilotniq/MJoulnir repository on GitHub. It is a 2-layer board of 64 × 27 mm with 49 parts on 21 nets, routed with 256 tracks and 12 vias.

It is built around the MCP602-I/P and 74LVC1G14Z. Its parts include 14 resistors, 4 connectors, 3 capacitors, 2 ICs and 2 diodes. It belongs with the power boards of this library.

Main components

2

Parts

49
QtyValueFootprintReferences
19TestPointTestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfileTP1, TP2, TP3, TP4, TP5, TP6, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19 +3
33.3kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR8, R9, R13
3MountingHoleMountingHole:MountingHole_4.3mm_M4_ISO14580H1, H2, H3
20.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1, C3
2100kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR5, R14
2Conn_01x04erland-footprints:CON-MOLEX-CGRIDIII-1x4-RA-0901362204J2, J3
11.3kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1
1100k 1%Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR10
11240 1%Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR3
1127k 1%Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR12
11uFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC2
12.0k 1%Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2
130kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR6
1330Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR7
173.2k 1%Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR11
174LVC1G14Package_TO_SOT_SMD:SOT-353_SC-70-5_HandsolderingU1
1Conn_01x03erland-footprints:CON-MOLEX-CGRIDIII-1x3-RA-0901362203J1
1Conn_01x08erland-footprints:CON-MOLEX-CGRIDIII-2x4-RA-0901303208J4
1D-CMPSH1-4erland-footprints:SOT23FD1
1D-MBRD540Package_TO_SOT_SMD:TO-252-3_TabPin2D2
1DNP (2.7k in connector?)Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR4
1MCP602Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1PolyfuseFuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolderF1
1Q-FET-N-SSM3K36MFVPackage_TO_SOT_SMD:SOT-723Q1

More from pilotniq/MJoulnir

5
  • 2 layers182.5 × 65 mmV1Panel, the printed circuit board in 3D

    V1Panel

    pilotniq/MJoulnir

    Hardware and software for the control system of a full size electric boat.

    171 parts2
  • 2 layers46 × 81 mmDCDC Power Control, the printed circuit board in 3D

    DCDC Power Control

    pilotniq/MJoulnir

    Hardware and software for the control system of a full size electric boat.

    79 parts2
  • 2 layers65 × 56.5 mmEV Hat, the printed circuit board in 3D

    EV Hat

    pilotniq/MJoulnir

    Hardware and software for the control system of a full size electric boat.

    58 parts2
  • 2 layers27 × 35 mmMeasureShunt, the printed circuit board in 3D

    MeasureShunt

    pilotniq/MJoulnir

    Hardware and software for the control system of a full size electric boat.

    28 parts2
  • 2 layers41 × 31 mmContactor Control, the printed circuit board in 3D

    Contactor Control

    pilotniq/MJoulnir

    Hardware and software for the control system of a full size electric boat.

    16 parts2

Similar boards

  • 2 layers101.8 × 52.5 mmMax2-dac, the printed circuit board in 3D

    Max2-dac

    dilshan/max2-audio-dac

    24-bit Stereo Audio DAC for Raspberry Pi

    158 parts61MIT
  • 2 layers308.7 × 241.8 mmOTTOtact, the printed circuit board in 3D

    OTTOtact

    cester-ino/OTTO-hardware

    those specs refer to the tactile buttons version, but a led backlight button version is in the works too.

    229 parts49GPL-3.0
  • 2 layers89.3 × 55 mmAmpcontrol f103, the printed circuit board in 3D

    Ampcontrol f103

    WiseLord/ampcontrol-f103

    Ampcontrol port on STM32F103CBT6

    71 parts40
  • 4 layers71.1 × 94 mmIpotcas, the printed circuit board in 3D

    Ipotcas

    SuperTails/ipotcas

    IP over Tin Can and String - Connecting to the internet over two tin cans and a piece of string

    75 parts12
  • 2 layers187.3 × 109.5 mmZ80RP2350b, the printed circuit board in 3D

    Z80RP2350b

    kysilv/z80-rp2350b-zx-compatible

    Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA

    131 parts9GPL-3.0
  • 2 layers100 × 100 mmBLDC STM32 proto 1, the printed circuit board in 3D

    BLDC STM32 proto 1

    g-rahul/Sensored-3-P-BLDC-Closed-Loop-V1

    This Firmware was developed as an extension of Ti's Sensored close-loop BLDC motor control using MSP430. Ti's application firmware for MSP430 has been modified for STM32F103 Series MCU's.

    131 parts5
  • 2 layers245.6 × 85.9 mmMycelium pcb, the printed circuit board in 3D

    Mycelium pcb

    microresearch/mycelium

    134 parts5GPL-3.0
  • 4 layers147.8 × 65 mmPrius gen2, the printed circuit board in 3D

    Prius gen2

    ksmola/PriusG2

    Inverter control board for Toyota Prius Gen 2 (XW20) inverter. Some of the schematics are based on Johannes Huebner's work found here. Running openinverter firmware.

    149 parts3

Questions

How big is the ChargeControl PCB?

It measures 64 × 27 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ChargeControl use?

49 parts, built around the MCP602-I/P and 74LVC1G14Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ChargeControl KiCad files?

From the pilotniq/MJoulnir repository on GitHub, at the commit this page was made from: the board is Hardware/ChargeControl/ChargeControl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ChargeControl design in my own project?

Its repository states no licence, so its author keeps all rights: ask pilotniq before reusing the design.