
V1Panel
pilotniq/MJoulnir
Hardware and software for the control system of a full size electric boat.

Hardware and software for the control system of a full size electric boat.
ChargeControl is an open-source printed circuit board by pilotniq, from the pilotniq/MJoulnir repository on GitHub. It is a 2-layer board of 64 × 27 mm with 49 parts on 21 nets, routed with 256 tracks and 12 vias.
It is built around the MCP602-I/P and 74LVC1G14Z. Its parts include 14 resistors, 4 connectors, 3 capacitors, 2 ICs and 2 diodes. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | TP1, TP2, TP3, TP4, TP5, TP6, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19 +3 |
| 3 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R9, R13 |
| 3 | MountingHole | MountingHole:MountingHole_4.3mm_M4_ISO14580 | H1, H2, H3 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R14 |
| 2 | Conn_01x04 | erland-footprints:CON-MOLEX-CGRIDIII-1x4-RA-0901362204 | J2, J3 |
| 1 | 1.3k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 100k 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 1 | 1240 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 127k 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 2.0k 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 73.2k 1% | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11 |
| 1 | 74LVC1G14 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U1 |
| 1 | Conn_01x03 | erland-footprints:CON-MOLEX-CGRIDIII-1x3-RA-0901362203 | J1 |
| 1 | Conn_01x08 | erland-footprints:CON-MOLEX-CGRIDIII-2x4-RA-0901303208 | J4 |
| 1 | D-CMPSH1-4 | erland-footprints:SOT23F | D1 |
| 1 | D-MBRD540 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | D2 |
| 1 | DNP (2.7k in connector?) | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | MCP602 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Polyfuse | Fuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F1 |
| 1 | Q-FET-N-SSM3K36MFV | Package_TO_SOT_SMD:SOT-723 | Q1 |

pilotniq/MJoulnir
Hardware and software for the control system of a full size electric boat.

pilotniq/MJoulnir
Hardware and software for the control system of a full size electric boat.

pilotniq/MJoulnir
Hardware and software for the control system of a full size electric boat.

pilotniq/MJoulnir
Hardware and software for the control system of a full size electric boat.

pilotniq/MJoulnir
Hardware and software for the control system of a full size electric boat.


cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.


SuperTails/ipotcas
IP over Tin Can and String - Connecting to the internet over two tin cans and a piece of string

kysilv/z80-rp2350b-zx-compatible
Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA

g-rahul/Sensored-3-P-BLDC-Closed-Loop-V1
This Firmware was developed as an extension of Ti's Sensored close-loop BLDC motor control using MSP430. Ti's application firmware for MSP430 has been modified for STM32F103 Series MCU's.


ksmola/PriusG2
Inverter control board for Toyota Prius Gen 2 (XW20) inverter. Some of the schematics are based on Johannes Huebner's work found here. Running openinverter firmware.
It measures 64 × 27 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the MCP602-I/P and 74LVC1G14Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pilotniq/MJoulnir repository on GitHub, at the commit this page was made from: the board is Hardware/ChargeControl/ChargeControl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pilotniq before reusing the design.