2 layers
2 layers175 × 10 mm
Nixie base
pierreca/circuitsHome-made electronics.
- Size
- 175 × 10 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 20
- Pads
- 54
- Tracks, vias
- 107, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Nov 2018
- Updated
- 20 Sep 2019
Overview
Nixie base is an open-source printed circuit board by pierreca, from the pierreca/circuits repository on GitHub, published under the MIT licence. It is a 2-layer board of 175 × 10 mm with 14 parts on 20 nets, routed with 107 tracks and 0 vias.
It belongs with the lEDs and displays boards of this library.
README
README.mdcircuits
Home-made electronics. It's probably full of mistakes but it's fun to learn.
4017-chaser
The simplest possible use of a 4017 IC with a 555 to clock it. Works with 10mm LEDs that I had on hand.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole:MountingHole_3.2mm_M3 | , | |
| 1 | Arduino | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J0 |
| 1 | PSU | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | PWR_JACK | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | RTC | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | TUBE_0 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J10 |
| 1 | TUBE_0_PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | TUBE_1 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J20 |
| 1 | TUBE_1_PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J21 |
| 1 | TUBE_2 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J30 |
| 1 | TUBE_2_PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J31 |
| 1 | TUBE_3 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J40 |
| 1 | TUBE_3_PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J41 |
Questions
How big is the Nixie base PCB?
It measures 175 × 10 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nixie base use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nixie base KiCad files?
From the pierreca/circuits repository on GitHub, at the commit this page was made from: the board is nixie-base/nixie-base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nixie base design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from pierreca/circuits
5- 2 layers42.2 × 45.2 mm
- 2 layers27.7 × 80.3 mm
- 2 layers36.3 × 31.8 mm
- 2 layers32 × 32 mm
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
