2 layers
2 layers27.7 × 80.3 mm
Neopixel clock base
pierreca/circuitsHome-made electronics.
- Size
- 27.7 × 80.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 36
- Pads
- 69
- Tracks, vias
- 60, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Nov 2018
- Updated
- 20 Sep 2019
Overview
Neopixel clock base is an open-source printed circuit board by pierreca, from the pierreca/circuits repository on GitHub, published under the MIT licence. It is a 2-layer board of 27.7 × 80.3 mm with 16 parts on 36 nets, routed with 60 tracks and 0 vias.
Its parts include 4 connectors, 3 resistors, 2 switches, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdcircuits
Home-made electronics. It's probably full of mistakes but it's fun to learn.
4017-chaser
The simplest possible use of a 4017 IC with a 555 to clock it. Works with 10mm LEDs that I had on hand.
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | , , , |
| 3 | 300 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R0, R1, R2 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW0, SW1 |
| 1 | 100uF 35V | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C0 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A0 |
| 1 | Chronodot | Logos:chronodot | U0 |
| 1 | Neopixel_12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Neopixel_24 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Neopixel_60 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J0 |
More from pierreca/circuits
5- 2 layers42.2 × 45.2 mm
- 2 layers175 × 10 mm
- 2 layers36.3 × 31.8 mm
- 2 layers32 × 32 mm
Similar boards
- 2 layers140.5 × 30 mm
Type e
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
16 parts3kApache-2.0 - 2 layers41.4 × 14.5 mm
U2f zero
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
16 parts2.4k - 2 layers77.5 × 33.7 mm
Breakout 72pin 1123038-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
16 parts1.2k - 2 layers122 × 37 mm
V0-UmbilicalBoard
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
16 parts1.1kGPL-3.0 - 2 layers152 × 57.6 mm
Videoslotadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
16 parts1kGPL-3.0 - 2 layers36 × 63.4 mm
Smart ringfinal layout
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
16 parts915 - 2 layers60 × 40 mm
- 2 layers21.1 × 26.9 mm
Questions
How big is the Neopixel clock base PCB?
It measures 27.7 × 80.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Neopixel clock base use?
16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Neopixel clock base KiCad files?
From the pierreca/circuits repository on GitHub, at the commit this page was made from: the board is neopixel-clock-base/neopixel-clock-base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Neopixel clock base design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).