Skip to the content
2 layers32 × 32 mmIothub badge, the printed circuit board in 3D

Iothub badge

pierreca/circuits

Home-made electronics.

Size
32 × 32 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
3
Pads
21
Tracks, vias
9, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Nov 2018
Updated
20 Sep 2019

Overview

Iothub badge is an open-source printed circuit board by pierreca, from the pierreca/circuits repository on GitHub, published under the MIT licence. It is a 2-layer board of 32 × 32 mm with 8 parts on 3 nets, routed with 9 tracks and 0 vias.

Its parts include 4 diodes and 1 switch. It belongs with the lEDs and displays boards of this library.

README

README.md

circuits

Home-made electronics. It's probably full of mistakes but it's fun to learn.

4017-chaser

The simplest possible use of a 4017 IC with a 555 to clock it. Works with 10mm LEDs that I had on hand.

Parts

8
QtyValueFootprintReferences
4LEDLED_THT:LED_D5.0mm_ClearD0, D1, D2, D3
1Battery_CellBattery:BatteryHolder_Keystone_3000_1x12mmBT0
1LOGOLogos:AzureIoTHubG***
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW0

The 7 most common of 8 parts.

More from pierreca/circuits

5
  • 2 layers4017-chaser, the printed circuit board in 3D

    4017-chaser

    pierreca/circuits

    Home-made electronics.

    28 partsMIT
  • 2 layers42.2 × 45.2 mm595-74ls47, the printed circuit board in 3D

    595-74ls47

    pierreca/circuits

    Home-made electronics.

    23 partsMIT
  • 2 layers175 × 10 mmNixie base, the printed circuit board in 3D

    Nixie base

    pierreca/circuits

    Home-made electronics.

    14 partsMIT
  • 2 layers36.3 × 31.8 mmDps badge, the printed circuit board in 3D

    Dps badge

    pierreca/circuits

    Home-made electronics.

    12 partsMIT

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the Iothub badge PCB?

It measures 32 × 32 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Iothub badge use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Iothub badge KiCad files?

From the pierreca/circuits repository on GitHub, at the commit this page was made from: the board is iothub-badge/iothub-badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Iothub badge design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).