2 layers104.1 × 81.3 mm
Projet piano proto kicad
SuperQuentin/TheMagicKeys
An esp32 soft to handle a old keyboard and turn into a midi one
16 parts
2 layers42.1 × 40.9 mm
Atmega hooting wiring
PhysicsUofRAUI/hooting_owlHold code and eventually the pcb layout for my hooting owl retrofit
- Size
- 42.1 × 40.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 30
- Pads
- 63
- Tracks, vias
- 99, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Jun 2023
- Updated
- 2 Aug 2023
Overview
Atmega hooting wiring is an open-source printed circuit board by PhysicsUofRAUI, from the PhysicsUofRAUI/hooting_owl repository on GitHub, published under the MIT licence. It is a 2-layer board of 42.1 × 40.9 mm with 16 parts on 30 nets, routed with 99 tracks and 15 vias.
It is built around the ATMEGA328-PU, LM317LZ and MCP1700-5002E/TO, with the CC0805KRX7R9BB104, CC0805KKX7R7BB105 and C0805C220J5GAC7800 among its other parts. Its parts include 6 capacitors, 4 ICs, 2 resistors, 1 transistor and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
9
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM317LZ
TO-92-40℃~+125℃@(Tj) 1 1.2V~37V 100mA 40V 80dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-92 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MCP1700-5002E/TO
TO-92-3-40℃~+125℃@(Tj) 1 1.6uA 250mA 350mV@(250mA) 44dB@(1kHz) 5V 6V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-92-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CC0805KRX7R9BB104
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCC0805KKX7R7BB105
080516V 1uF X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTC0805C220J5GAC7800
080522pF 50V C0G ±5% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSKEMETMultilayer Ceramic Capacitors MLCC - SMD/SMT
RMCF0805JT27K0
0805-55℃~+155℃ 125mW 150V 27kΩ Thick Film Resistor ±200ppm/℃ ±5% 0805 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface MountLFXTAL027945BULK
HC-49SCrystalsIQD
TIP122
TO-2201000 100V 2.5V 200uA 5A 5V 65W NPN TO-220 Darlington Transistors ROHSSTMicroelectronicsDarlington Transistors
README
README.mdhooting_owl
Hold code and eventually the pcb layout for my hooting owl retrofit
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 1 | 27k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 75k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Crystal | Crystal:Resonator-2Pin_W6.0mm_H3.0mm | Y1 |
| 1 | LM317L_TO92 | Package_TO_SOT_THT:TO-92_Inline | U4 |
| 1 | MCP1700x-500xxTO | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | TIP122 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U1 |
Questions
How big is the Atmega hooting wiring PCB?
It measures 42.1 × 40.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Atmega hooting wiring use?
16 parts, built around the ATMEGA328-PU, LM317LZ, MCP1700-5002E/TO and CC0805KRX7R9BB104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Atmega hooting wiring KiCad files?
From the PhysicsUofRAUI/hooting_owl repository on GitHub, at the commit this page was made from: the board is atmega_hooting_wiring/atmega_hooting_wiring.kicad_pcb and its schematic atmega_hooting_wiring/atmega_hooting_wiring.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Atmega hooting wiring design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers62 × 45.9 mm
Dcs
MixedSignalDevelopment/K2601-Doomsday-Comms-System
Editable source design for the Doomsday Comms System (D.C.S., SKU OS2601), board rev B.
50 parts1MIT - 4 layers102 × 76 mm
Battery Management Unit (BMU)
VikingMotorsports/Battery-Management-System-Capstone-2026
The BMS Capstones deliverables
94 parts1 - 2 layers50 × 35 mm
Rs485-interface
devkyber/PCB
AI-assisted PCB engineering for native KiCad: source evidence, scoped changes, checked previews, human review, and reproducible release packages.
13 parts - 2 layers97.8 × 57.8 mm
- 2 layers100 × 100 mm
- 2 layers24.6 × 24.7 mm
V3 Conditioner Kicad
EFI-Customs/Motronic-1.3-Speeduino-Compatible-Project
Collection of resources for Speeduino related items & EFI Customs products
17 parts5 - 4 layers101.6 × 76.2 mm
Pco2-sensor board
NOAA-PMEL/ASVCO2
Open Source Repository for the Autonomous Surface Vehicle CO2 (ASVCO2) gen2 system
154 parts