Skip to the content
2 layers88.1 × 75 mmRubberdrive, the printed circuit board in 3D

This repository provides open-source hardware designs, physical bench measurement datasets, numerical simulation routines, and real-time DSP emulations for the Rubber Zener clipping topology.

Size
88.1 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
41
Pads
152
Tracks, vias
312, 53
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Sep 2026
Updated
9 Oct 2026

Overview

Rubberdrive is an open-source printed circuit board by PhysicsDptAngers, from the PhysicsDptAngers/GomuGomuNoDrive repository on GitHub. It is a 2-layer board of 88.1 × 75 mm with 55 parts on 41 nets, routed with 312 tracks and 53 vias.

It is built around the TL072 and B5819W SL. Its parts include 15 capacitors, 12 resistors, 4 diodes, 4 connectors and 4 switches.

Main components

2

README

README.md

Rubber Zener (GomuGomuNoDrive): Analog Circuit & Anti-Aliased Virtual Analog Model

This repository provides open-source hardware designs, physical bench measurement datasets, numerical simulation routines, and real-time DSP emulations for the Rubber Zener clipping topology.

The Rubber Zener is a parameterized audio clipping circuit based on the bipolar junction transistor (BJT) $V_{be}$ multiplier, augmented with local passive and reactive networks. It allows decoupled analog tuning of positive and negative conduction thresholds, soft-knee transition slopes, deep-saturation current ceilings, frequency-dependent clipping profiles, and envelope-dependent DC baseline sag.

Academic Context:
This repository contains the reference implementation, experimental datasets, and validation routines accompanying the research paper:
The Rubber Zener Clipping Topology: Circuit Analysis, Dynamic Characterization, and Anti-Aliased Virtual Analog Modeling (currently under peer review).


コムコム の Drive (Gomu Gomu No Drive) ?

The $V_{be}$ multiplier circuit is sometimes called "Rubber Zener" because, like rubber, its threshold is malleable. In pop culture, the most well-known "rubber man" is Luffy (ルフィ) from One Piece (ワンピース). His iconic attack names start with "ゴムゴム" (Gomu Gomu) since ゴム (gomu) in Japanese means rubber. Hence the name of this distortion pedal: コムコム の Drive (Gomu Gomu No Drive).


Repository Structure

text
GomuGomuNoDrive/
├── Data/
│   ├── AC/                                # AC bench measurements, steady-state datasets, and fitting scripts
│   └── DC characteristics/                # Static I-V measurement datasets
├── Hardware/
│   ├── GomuGomuNoDrive_hard/              # Shunt dipole hard-clipping implementation (KiCad, 3D models, Gerbers)
│   └── GomuGomuNoDrive_Soft/              # Feedback loop soft-clipping implementation (KiCad, BOM, production files)
├── NumericalSimulation/                   # SPICE benchmarks, 4D ODE solvers, harmonic balance, and validation routines
└── Software/
    ├── Faust/                             # Faust core DSP architecture and C++ wrappers
    ├── JesuSonic/                         # Real-time JSFX implementation for Cockos REAPER
    └── Juce Plugin/                       # Full C++ audio plugin project (VST3, CLAP, LV2, Standalone)
Pre-compiled Binaries

Pre-compiled binaries for 64-bit Windows and Linux systems (VST3 and Standalone) are provided under the Releases section.


License

This project adopts a multi-licensing scheme adapted to its different components:


Citation

If you use this circuit topology, DSP implementation, or dataset in academic work or derivative projects, please cite:

TBA !

Parts

55
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC10, C14, C15, C16, C17
410KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R4, R5, R6
31uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC12, C13, C18
34K7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR16, R25, R27
3C8598Diode_SMD:D_SOD-123D3, D8, D9
2100K LogPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV22, RV23
222nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C6
24k7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR24, R26
24n7Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C3
250KPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV18, RV20
2AudioJack3Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HCD2_HorizontalJ2, J3
2BC850Package_TO_SOT_SMD:SOT-23Q1, Q2
2SW_DPDT_x2Rubber_drive_Soft:SW_MINI-SPDT-SWSW6, SW8
2SW_SPDT_MSMRubber_drive_Soft:SW_MINI-SPDT-SWSW5, SW7
2TL072Package_DIP:DIP-8_W7.62mmU1, U3
1+9VConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP21
1-9VConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP20
1100Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7
110UCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC11
11MResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10
1220nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7
16K8Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
19VConnector_BarrelJack:BarrelJack_HorizontalJ1
1CCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
1Conn_01x06_SocketConnector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_VerticalJ5
1LEDLED_THT:LED_D5.0mm_ClearD4
1TC7662Bx0APackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1inConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP31
1in_DC_coupledConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP30
1in_soft_gainConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP22
1outConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP29
1output_pre_grain_DCConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP27

More from PhysicsDptAngers/GomuGomuNoDrive

1
  • 2 layers88 × 75 mmRubber drive hard, the printed circuit board in 3D

    Rubber drive hard

    PhysicsDptAngers/GomuGomuNoDrive

    This repository provides open-source hardware designs, physical bench measurement datasets, numerical simulation routines, and real-time DSP emulations for the Rubber Zener clipping topology.

    62 parts1

Similar boards

  • 4 layers18 × 51 mmRPROM, the printed circuit board in 3D

    RPROM

    niklasekstrom/RPROM

    ROM emulator based on the RP2350B microcontroller

    44 parts47
  • 2 layers65.4 × 133.6 mmBSidesTLV2025GloveBadge, the printed circuit board in 3D

    BSidesTLV2025GloveBadge

    bsidestlv/bsidestlv-2025-badge

    To solve the challenge you will need to discover a series of flags, hidden inside the badge. Each one will help you unlock the next step in the challenge, to finally reveal the ultimate secret the badge holds.

    35 parts13MIT
  • 4 layers80 × 50.5 mmLoeti, the printed circuit board in 3D

    Loeti

    elagil/loeti

    Soldering equipment for JBC irons

    110 parts5
  • 2 layers18.5 × 35.8 mmVkm, the printed circuit board in 3D

    Vkm

    daniel-starke/vkvm

    Virtual KVM

    35 parts3
  • 4 layers44 × 44 mmNode pcb, the printed circuit board in 3D

    Node pcb

    marino222/digital-clock72

    Kinetic Art Clock consisting of LCD displays

    55 parts2MIT
  • 2 layers37.3 × 31.8 mmKeyChain, the printed circuit board in 3D

    KeyChain

    Brammert42/EPKeychain

    A keychain equipped with a RP2040 and a E-ink

    88 parts
  • 4 layers30 × 28 mmRebot ctrl, the printed circuit board in 3D

    Rebot ctrl

    Matheus3007/pcb-lab

    PCBs designed entirely as code: Python circuits + KiCad 10 + Freerouting, checked, rendered and ordered assembled from JLCPCB

    58 partsMIT
  • 2 layers38.3 × 26.8 mmAeroBlinker, the printed circuit board in 3D

    AeroBlinker

    toyJig/AeroBlinker

    Custom PCB w/ KiCAD that reads Receiver Signals to control light flash patterns - Aeronautics Team

    42 parts

Questions

How big is the Rubberdrive PCB?

It measures 88.1 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rubberdrive use?

55 parts, built around the TL072 and B5819W SL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rubberdrive KiCad files?

From the PhysicsDptAngers/GomuGomuNoDrive repository on GitHub, at the commit this page was made from: the board is Hardware/GomuGomuNoDrive_Soft/Rubberdrive.kicad_pcb and its schematic Hardware/GomuGomuNoDrive_Soft/Rubberdrive.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rubberdrive design in my own project?

Its repository states no licence, so its author keeps all rights: ask PhysicsDptAngers before reusing the design.