2 layers99.1 × 99.1 mm
Frontplatine
PhyPiDAQ/EducatorsGuide
Tutorial for educators and examples of educational physics experiments
38 parts1BSD-2-Clause
2 layers99.1 × 99.1 mm
Messplatine
PhyPiDAQ/EducatorsGuide1Tutorial for educators and examples of educational physics experiments
- Size
- 99.1 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 96
- Pads
- 246
- Tracks, vias
- 347, 147
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Dec 2021
- Updated
- 31 Aug 2026
Overview
Messplatine is an open-source printed circuit board by PhyPiDAQ, from the PhyPiDAQ/EducatorsGuide repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 99.1 × 99.1 mm with 51 parts on 96 nets, routed with 347 tracks and 147 vias.
It is built around the TMA 0505D, MCP6042-I/P and CA3140, with the INA219AID, ADS1115 and ULN2003 among its other parts. Its parts include 12 resistors, 11 ICs, 10 capacitors, 8 diodes and 4 connectors.
Main components
6
TMA 0505D
SIP,19.5x6.1mmIsolated Power ModulesTRACO POWER
MCP6042-I/P
PDIP-8-40℃~+85℃ 1.4V~6V 14kHz 15uV/℃ 170nV/√Hz@1kHz 1pA 1pA 2 20mA 3V/ms 3mV 600nA 75dB Built-in compensation、ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierCA3140
DIP-8-15V~15V -40℃~+125℃ 1 10uV/℃ 30pA 3mV 4.5MHz 40nV/√Hz@1kHz 45mA 50pA 5mA 80dB 9V/us SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
INA219AID
SOIC-8-40℃~+125℃ 0.1uV/℃ 0V~26V 1 10uV 120dB 20nA 3V~5.5V 700uA Bidirectional detection、Zero drift / auto-zero、Input filter、Power monitoring、Digital output interface ±26V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense AmplifiersADS1115
UncategorisedTexas Instruments
ULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor Arrays
README
README.mdPhyPiDAQ Educators' Guide README
Full Educators Tutorial in English
Ausführliche Anleitung in deutscher Sprache
Summary
The PhyPiDAQ project aims to provide students access to state-of-the-art measurement technology and data acquisition tools. As it is based on standardized protocols and hardware, it can not only be cheaper to set up than similar offers but also gives a great educational introduction in methods of modern science. Additionally, the measuring technology can be run off a power bank, making it portable and allowing great experiments in nature. This project targets students from middle school up to undergraduates at the university level with great matching educational concepts.
This is the general tutorial aming at educators. If you are looking for hardware guides, build instructions or software details, please check out our other repositories.
Currently available Documentation
Übersicht in Deutscher Sprache
Das PhyPiDAQ-Projekt zielt darauf ab, Studierenden und SchülerInnen Zugang zu modernster Messtechnik und Datenerfassung zu geben. Da es auf offenen, standardisierten Protokollen und leicht verfügbarer Hardware basiert, kann es nicht nur kostengünstig eingerichtet werden, sondern bietet auch eine hervorragende pädagogische Einführung in die Messmethoden der modernen Wissenschaft. Die Messtechnik kann mit einer Powerbank betrieben werden, was sie tragbar macht und Experimente auch in freier Natur ermöglicht. PhyPiDAQ richtet sich an SchülerInnen von der Mittelstufe bis hin zu Studierenden auf Universitätsebene.
Diese allgemeine Anleitung richtet sich an Lehrkräfte. Wenn Sie nach Hardware-Beschreibungen, Bauanleitungen oder einer detaillierten Beschreibung der Software suchen, schauen Sie sich bitte unsere anderen Repositories an.
Derzeit verfügbare Dokumentation
- Anleitung für Lehrkräfte
- Einführungskurs für Schülerinnen und Schüler
- Beschreibung der Software
- Bauanleitung Messkoffer
- Leitfaden für das Experimentieren mit PhyPiDAQ
Contributing
For information on how to contribute to this project, please refer to the CONTRIBUTING.md file.
License
This project is licensed under the MIT BSD 2-Clause License. For more information refer to the LICENSE file.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | DIODE_small | LibraryPhyPiDAQ:Diode | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | 100n | LibraryPhyPiDAQ:kerko | C1, C2, C7, C8, C9, C11 |
| 6 | 10k | LibraryPhyPiDAQ:Resistor | R4, R5, R6, R7, R8, R9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10µ | LibraryPhyPiDAQ:elko | C5, C6, C10 |
| 2 | 100k | LibraryPhyPiDAQ:Poti | R3, RV1 |
| 2 | 1M | LibraryPhyPiDAQ:Resistor | R1, R2 |
| 2 | Conn_01x20_Socket | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1, J14 |
| 2 | J_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 2 | MCP6042 | LibraryPhyPiDAQ:MCP6042 | U1, U7 |
| 1 | 100 | LibraryPhyPiDAQ:Resistor | R10 |
| 1 | 200 | LibraryPhyPiDAQ:Resistor | R11 |
| 1 | 47µ | LibraryPhyPiDAQ:elko | C3 |
| 1 | AD623 | LibraryPhyPiDAQ:AD623 | U5 |
| 1 | ADS1115 | LibraryPhyPiDAQ:ADS1115 | U8 |
| 1 | CA3140 | LibraryPhyPiDAQ:CA3140 | U4 |
| 1 | Conn_02x20_Odd_Even | LibraryPhyPiDAQ:40pin | J26 |
| 1 | Elektrometer_In | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | INA219 | LibraryPhyPiDAQ:INA219 | U6 |
| 1 | KY-051 | LibraryPhyPiDAQ:KY-051 | U10 |
| 1 | MCP4725 | LibraryPhyPiDAQ:MCP4725 | U9 |
| 1 | Powersupply | LibraryPhyPiDAQ:powersupply | U31 |
| 1 | TMA0505D | LibraryPhyPiDAQ:TMA0505D | U3 |
| 1 | ULN2003 | LibraryPhyPiDAQ:ULN2003 | U11 |
Questions
How big is the Messplatine PCB?
It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Messplatine use?
51 parts, built around the TMA 0505D, MCP6042-I/P, CA3140 and INA219AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Messplatine KiCad files?
From the PhyPiDAQ/EducatorsGuide repository on GitHub, at the commit this page was made from: the board is Verstaerkerplatine/Messplatine/Messplatine.kicad_pcb and its schematic Verstaerkerplatine/Frontplatine/Frontplatine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Messplatine design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from PhyPiDAQ/EducatorsGuide
1Similar boards
- 4 layers52.5 × 59.7 mm
ESPHome Indoor Multi Sensor
mikelawrence/esphome-indoor-multi-sensor-hardware
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.
113 parts14CERN-OHL-P-2.0 - 2 layers83.8 × 50.8 mm
Shunt charge controller
grillbaer/solar-power-supply
Solar power harvesting for micro controller projects with li-Ion battery and highly efficient charge controller
16 parts3MIT - 2 layers
- 2 layers138 × 162 mm
Remora Nucleo F446ZE Hat
ben-jacobson/RemoraNucleoHatPCB
Cost-effective, customisable LinuxCNC motion control unit.
179 parts1GPL-3.0 - 2 layers100 × 75 mm
- 2 layers116.8 × 92.2 mm
- 2 layers69.6 × 33.5 mm
- 2 layers91.7 × 48.8 mm
