

Ayla80
QMK Based Open Hardware Keyboard with 99 Keys
- Size
- 376 × 124 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 310
- Nets
- 238
- Pads
- 1,561
- Tracks, vias
- 1,797, 167
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Jul 2024
- Updated
- 4 Nov 2024
Overview
Ayla80 is an open-source printed circuit board by phpbbireland, from the phpbbireland/mioke80 repository on GitHub. It is a 4-layer board of 376 × 124 mm with 310 parts on 238 nets, routed with 1,797 tracks and 167 vias.
It is built around the WS2812B and BSS138. Its parts include 100 diodes, 5 switches, 2 capacitors, 2 resistors and 2 connectors. It belongs with the keyboards and input boards of this library.
Main components
2README
README.mdMoving this repo to phpbbireland/mioke
The new repo wil correct directory structure for this project... this repo will be deleted...
mioke80 / ayla_411
QMK Based Open Hardware Keyboard with 99 Keys and Via Support
Just another open source / open hardware ~80% keyboard...
Ref: https://hackaday.io/project/197065-mioke80-iso-99-key-80-keyboard
- Schematic complete...
- Software 80% complete...
- QMK/VIA code tested on Blackpill 411 Dev Board (see blackpill_version)... working 11th August 2024
- Keyboard works... Now loads in usevia.app... Needed work to get RGB and Encoder working...
My main test code is now in /blackpill_version/QMK/ayla/ayla80
I have designed a new test board using the STM32F411RETx, it contains all the necessary keyboard electronics (except for the key switches, matrix diodes and RGB leds as these are on the actual keyboard PCB from the first prototype). Connection between boards is via 30 pin 1.27" pitch header connector.
Note: kicad2 folder contains working test copy, files will be moved to kicad once testing complete...
Kicad Resources:
https://github.com/ebastler/marbastlib
https://github.com/joe-scotto/scottokeebs
Matrix 10X10
┌───┐ ┌───┐┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐┌───┐┌───┐
│0,0│ │0,1││N/A││0,2│0,3│0,4│0,5││0,6│0,7│0,8│0,9││1,0│1,1│1,2│1,3││1,4││1,5││1,6│
└───┘ └───┘└───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘└───┘└───┘
┌───┐ ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┐┌───┐┌───┐
│1,7│ │1,8│1,9│2,0│2,1│2,2│2,3│2,4│2,5│2,6│2,7│2,8│2,9│3,0│ 3,1 ││3,2││3,3││3,4│
├───┤ ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┤├───┤├───┤
│3,5│ │ 3,6 │3,7│3,8│3,9│4,0│4,1│4,2│4,3│4,4│4,5│4,6│4,7│4,8│ ││4,9││5,0││5,1│
├───┤ ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ │├───┤├───┤├───┤
│5,2│ │ 5,3 │5,4│5,5│5,6│5,7│5,8│5,9│6,0│6,1│6,2│6,3│6,4│6,5│6.6 ││6,7││6,8││6,9│
├───┤ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤├───┤├───┤├───┤
│7,0│ │7,1 │7,2│7,3│7,4│7,5│7,6│7,7│7,8│7,9│8,0│8,1│8,2│ 8,3 ││8,4││8,5││8,6│
├───┤ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤├───┤├───┤├───┤
│8,7│ │8.8 │8,9 │9,1 │ 9,2 │9,3 │9,4 │9,5 │9,6 ││9,7││9,8││9,9│
└───┘ └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┘└───┘└───┘Will add 4x3 number keypad and rotary encoder which attaches via a 5x2 ribbon cable but might need more gpio pin, another process for this version? The Blackpill version has an endoder... Note Some GPIO pins may change as it appears some can't be used (according to sources)...
Parts
310| Qty | Value | Footprint | References |
|---|---|---|---|
| 100 | 4148 | ScottoKeebs_Components:Diode_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D100 +84 |
| 99 | MX_SW_HS | marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +83 |
| 99 | WS2812B | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | RGB1, RGB2, RGB10, RGB11, RGB12, RGB13, RGB14, RGB15, RGB16, RGB17, RGB18, RGB19, RGB20, RGB21, RGB22, RGB23 +83 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1, J2 |
| 2 | MX_stab | ScottoKeebs_Stabilizer:Stabilizer_MX_2.00u | S1, S2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Encoder | MyComponents:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | MX_stab | ScottoKeebs_Stabilizer:Stabilizer_MX_6.25u | S3 |
| 1 | MX_stab | ScottoKeebs_Stabilizer:Stabilizer_MX_3.00u | S4 |
More from phpbbireland/mioke80
2- 2 layers376 × 124 mm

- 2 layers376 × 124 mm

Similar boards
- 2 layers325.5 × 240.1 mm

- 2 layers390 × 120.2 mm

- 2 layers89 × 124 mm

Hub20
joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.
183 parts68 - 2 layers220 × 70 mm

Bemini rp
ianklug/bemini
A miniature mechanical keyboard controller with a rotary encoder for staggered-key rhythm games.
70 parts55CC-BY-SA-4.0 - 2 layers68 × 100 mm

Keyboard featherwing
arturo182/keyboard_featherwing_hw
The Keyboard FeatherWing is an easy way to add a handheld Qwerty keyboard and a 2.6” color display (+ more) to your project! It fits well in your hands and is great for typing with your thumbs, early 2000s-style.
58 parts43 - 2 layers283 × 94.2 mm

Tsuki
AcheronProject/Tsuki
60% keyboard PCB featuring a wide array of layouts powered by STM32F072
387 parts35 - 2 layers475 × 139.9 mm

Skogaslider main pcb
skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
175 parts18MIT - 4 layers42 × 42 mm

Dynossat edu obc
BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files
60 parts14
Questions
How big is the Ayla80 PCB?
It measures 376 × 124 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ayla80 use?
310 parts, built around the WS2812B and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ayla80 KiCad files?
From the phpbbireland/mioke80 repository on GitHub, at the commit this page was made from: the board is blackpill_version/kicad/ayla80.kicad_pcb and its schematic kicad/Mioke80.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ayla80 design in my own project?
Its repository states no licence, so its author keeps all rights: ask phpbbireland before reusing the design.