2 layers290.3 × 95.7 mm
2 layers325.5 × 240.1 mm
Public files for keyboards and more
- Size
- 325.5 × 240.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 448
- Nets
- 326
- Pads
- 2,586
- Tracks, vias
- 3,914, 346
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Aug 2018
- Updated
- 11 Sep 2025
Overview
Mun is an open-source printed circuit board by RGBKB, from the RGBKB/Keyboard-files repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 325.5 × 240.1 mm with 448 parts on 326 nets, routed with 3,914 tracks and 346 vias.
It is built around the STM32F303CCT6, AT42QT2120-XU and WS2812B, with the GG0402052R542P, JS202011JAQN and BSS138 among its other parts. Its parts include 170 diodes, 100 capacitors, 84 switches, 36 resistors and 20 connectors. It belongs with the STM32 boards of this library.
Main components
8
STM32F303CCT6
LQFP-48(7x7)-40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 37 40KB 72MHz ARM Cortex-M4 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
AT42QT2120-XU
TSSOP-201.8V~5.5V 12 Capacitive Touch、自动灵敏度校准、防水抗干扰触摸、接近检测、滑动触摸 TSSOP-20 Touch Sensors ROHSMicrochip TechnologyTouch Sensors
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
GG0402052R542P
0402-55℃~+125℃ 100nA 15.5V 2.5pF 3A@8/20us 46W@8/20us 5.5V 5V ESD IEC 61000-4-2、IEC 61000-4-4 0402 ESD and Surge Protection (TVS/ESD) ROHSKyocera AVXESD And Surge Protection (TVS/ESD)
JS202011JAQN
SMD-40℃~+85℃ 300mA 5,000 cycles 6V DPDT J-Lead Rectangular Columnar Surface Mount, Right Angle SMD Slide Switches ROHSC&KSlide Switches
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
DTC123JE
SOT-523-55℃~+150℃ 1 NPN (Pre-Biased) 1.1V 100mA 150mW 2.2kΩ 250MHz 26 300mV 300mV 500mV@100uA,5V 50V 80 NPN SOT-523 Digital Transistors ROHSHXY MOSFETDigital TransistorsTS5215A 025
SMDSMD New Arrivals ROHShanxiaUncategorised
README
README.mdRGBKB_releases
Files for keyboards/other created for RGBKB.net
Parts
448| Qty | Value | Footprint | References |
|---|---|---|---|
| 90 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C11, C12, C13, C14, C15, C16, C17, C18, C19, C100, C101, C102, C103, C104 +74 |
| 74 | KEYSW | Legonut's Library:Mx_100_HS | K1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +58 |
| 72 | D | Diode_SMD:D_0603_1608Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +56 |
| 70 | Val** | Legonut's Library:WS2812B | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +54 |
| 28 | WS2812B | Legonut's Library:SK6812-SIDE | LED36, LED37, LED38, LED39, LED40, LED41, LED42, LED43, LED44, LED45, LED46, LED47, LED48, LED49, LED85, LED86 +12 |
| 16 | 4.7kR | Capacitor_SMD:C_0603_1608Metric | R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R35, R36 |
| 10 | encoder | Legonut's Library:encoder | E1, E2, E3, E4, E5, E6, E7, E8, E9, E10 |
| 8 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R8, R9, R10, R11 |
| 4 | 10kR | Capacitor_SMD:C_0603_1608Metric | R31, R32, R33, R34 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric | R6, R7, R13, R14 |
| 4 | 22pF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C61, C62 |
| 4 | 2Ustabilizer | Legonut's Library:STAB_PCB_200H | S1, S2, S3, S4 |
| 4 | GG0402052R542P | Diode_SMD:D_0402_1005Metric | DS5, DS6, DS7, DS8 |
| 4 | JS202011JAQN | Legonut's Library:DPDT-SM | SW1, SW2, SW5, SW6 |
| 4 | USB_C_Receptacle | Legonut's Library:HRO-TYPE-C-31-M-14 | J1, J2, J8, J9 |
| 2 | 1.5k | Resistor_SMD:R_0603_1608Metric | R29, R30 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R12 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C10, C56 |
| 2 | 1N4007 | Diode_SMD:D_SOD-123F | DS2, DS4 |
| 2 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C9, C53 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C6, C60 |
| 2 | 472861001 | Legonut's Library:472861001 | J15, J16 |
| 2 | 8MHz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1, Y2 |
| 2 | AT42QT2120 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | J17, J18 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 2 | Conn_01x04 | Legonut's Library:Landingpad_Horizontal_1x4 | J4, J10 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6, J11 |
| 2 | Conn_01x06 | Legonut's Library:00-9188-006spring | J5, J12 |
| 2 | Conn_01x06 | Legonut's Library:00-9188-006pads | J7, J13 |
| 2 | DTC123J | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LOGO | Legonut's Library:Mun_touch_encoder_pads | G***, G*** |
| 2 | LOGO | Legonut's Library:QMK | G***, G*** |
| 2 | LOGO | Legonut's Library:RGBKB_CU | G***, G*** |
| 2 | MCP1700-3302E_SOT23 | Package_TO_SOT_SMD:SOT-23 | U1, U3 |
| 2 | STM32F303CCT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2, U4 |
| 2 | SWCLK | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J21, J22 |
| 2 | SWDIO | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J19, J20 |
| 2 | TS5215A | Button_Switch_SMD:SW_SPST_TL3342 | SW3, SW4 |
The 442 most common of 448 parts.
More from RGBKB/Keyboard-files
3- 2 layers301.2 × 140.8 mm
- 2 layers163 × 137.5 mm
Similar boards
- 2 layers391 × 129.9 mm
- 2 layers171.7 × 160.5 mm
Slider rev 1 0
second-string/capacitive-touch-slider-board-prototype
Protoype hardware and firmware for evaluating different designs of capacitive touch sliders
159 partsMIT - 2 layers
- 2 layers390 × 120.2 mm
- 2 layers89 × 124 mm
Hub20
joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.
183 parts68 - 2 layers283 × 94.2 mm
Tsuki
AcheronProject/Tsuki
60% keyboard PCB featuring a wide array of layouts powered by STM32F072
387 parts35 - 2 layers84.3 × 65 mm
- 2 layers305 × 100.3 mm
Questions
How big is the Mun PCB?
It measures 325.5 × 240.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mun use?
448 parts, built around the STM32F303CCT6, AT42QT2120-XU, WS2812B and GG0402052R542P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mun KiCad files?
From the RGBKB/Keyboard-files repository on GitHub, at the commit this page was made from: the board is Mun/Mun design files/Mun.kicad_pcb and its schematic BANANA/10133-04 Kicad Project/10133.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mun design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).