2 layers95 × 46 mm
2 layers96.5 × 53.3 mm
NodeVote
phong516/iotVisionLab- Size
- 96.5 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 24
- Pads
- 39
- Tracks, vias
- 12, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Jul 2023
- Updated
- 2 Jul 2023
Overview
NodeVote is an open-source printed circuit board by phong516, from the phong516/iotVisionLab repository on GitHub. It is a 2-layer board of 96.5 × 53.3 mm with 3 parts on 24 nets, routed with 12 tracks and 0 vias.
It is built around the ESP32-C3-12F. Its parts include 1 IC, 1 transistor and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdiotVisionLab
Các project trong kì thực tập tại IoTVisionLab
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | ESP32-C3-12F | IVS_FOOTPRINTS:ESP8266-07__ESP32-C3-12F | U1 |
| 1 | N_Mosfet | IVS_FOOTPRINTS:SOT23-3 | Q1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-AB_Molex_47590-0001 | J2 |
Questions
How big is the NodeVote PCB?
It measures 96.5 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NodeVote use?
3 parts, built around the ESP32-C3-12F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NodeVote KiCad files?
From the phong516/iotVisionLab repository on GitHub, at the commit this page was made from: the board is pcb/nodeVote/nodeVote.kicad_pcb and its schematic pcb/lora/khối lora.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NodeVote design in my own project?
Its repository states no licence, so its author keeps all rights: ask phong516 before reusing the design.
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
