2 layers65 × 56 mm
2 layers139.7 × 80 mm
ToolChanger
PerraE/ToolChangerToolChanger for Emco 120P.
- Size
- 139.7 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 67
- Pads
- 138
- Tracks, vias
- 158, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Feb 2020
- Updated
- 10 Jun 2024
Overview
ToolChanger is an open-source printed circuit board by PerraE, from the PerraE/ToolChanger repository on GitHub. It is a 2-layer board of 139.7 × 80 mm with 23 parts on 67 nets, routed with 158 tracks and 0 vias.
Its parts include 5 ICs, 4 resistors, 4 diodes and 4 connectors. It belongs with the STM32 boards of this library.
README
README.mdToolChanger
ToolChanger for Emco 120P.
This tool changer will be used in a PathPilot (LinuxCNC) controller for a Emoc 120P lathe Components for PathPilot is Mesa 7i92 and 7i76,
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4, H5, H6 |
| 4 | 3,3K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R3, R4 |
| 4 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U2, U3, U4, U5 |
| 1 | Con_Motor | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02 | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_2-G-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | Conn_01x06 | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_6-G-5.08_1x06_P5.08mm_Horizontal | J3 |
| 1 | Conn_01x26_Male | Connector_IDC:IDC-Header_2x13_P2.54mm_Vertical | J1 |
| 1 | STM32L-Discovery | _footprint:STM32L-Discovery | U1 |
Questions
How big is the ToolChanger PCB?
It measures 139.7 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ToolChanger use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ToolChanger KiCad files?
From the PerraE/ToolChanger repository on GitHub, at the commit this page was made from: the board is PCB/ToolChanger/ToolChanger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ToolChanger design in my own project?
Its repository states no licence, so its author keeps all rights: ask PerraE before reusing the design.
Similar boards
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258