

Lora2020 21
the PCB is used to provide circuit connection, debuging and addressing function design of PCB is done by KiCAD ALL project files for KiCAD schematic file circuit layout file gerber and drill files Video for learning how…
- Size
- 53.3 × 55.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 38
- Pads
- 76
- Tracks, vias
- 65, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Apr 2021
- Updated
- 29 Apr 2021
Overview
Lora2020 21 is an open-source printed circuit board by PequodMD, from the PequodMD/My-works repository on GitHub. It is a 2-layer board of 53.3 × 55.9 mm with 13 parts on 38 nets, routed with 65 tracks and 0 vias.
It is built around the AMS1117-3.3. Its parts include 4 connectors, 2 capacitors, 2 resistors, 2 diodes and 1 IC.
Main components
1README
LoRa-Localisation-System/HardwareComponents/CustomPCB/README.mdthe PCB is used to provide circuit connection, debuging and addressing function
design of PCB is done by KiCAD
ALL project files for KiCAD
schematic file

circuit layout file

gerber and drill files

Video for learning how to use KiCAD
appearance of the board

components on top:
- 2 LEDs and resistors(for debuging)
- 6 ways DIP switch(to config address of the device)
- a 5V to 3.3V regulator and two capacitors(power supply for Ra-02 module)
to fabricate the PCB, submit the GERBER files(Front and Bottom of copper, mask and silks layers) with the drill files(zip in one) to the following website
OSHPARK(for final PCB version)
JLPCB(for prototype PCB)
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C_Small | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D0, D1 |
| 2 | R | Resistor_SMD:R_1206_3216Metric | R0, R1 |
| 1 | 71:52 leikezE | Lora2020_21:Ra-02(SX1278) | 71:52 leikezE |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
| 1 | SW_DIP_x06 | Button_Switch_THT:SW_DIP_SPSTx06_Slide_9.78x17.42mm_W7.62mm_P2.54mm | SW0 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Lora2020 21 PCB?
It measures 53.3 × 55.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lora2020 21 use?
13 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lora2020 21 KiCad files?
From the PequodMD/My-works repository on GitHub, at the commit this page was made from: the board is LoRa-Localisation-System/HardwareComponents/CustomPCB/Lora2020_21.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lora2020 21 design in my own project?
Its repository states no licence, so its author keeps all rights: ask PequodMD before reusing the design.