2 layers130.8 × 81.5 mm
2 layers76.2 × 104.1 mm
Pi Compute-3-Lite MT32
peon374/mt32-cm3plusThis is a CM3+ version of the MT32Pi hardware.
- Size
- 76.2 × 104.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 60
- Pads
- 427
- Tracks, vias
- 578, 85
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Sep 2021
- Updated
- 19 Sep 2021
Overview
Pi Compute-3-Lite MT32 is an open-source printed circuit board by peon374, from the peon374/mt32-cm3plus repository on GitHub. It is a 2-layer board of 76.2 × 104.1 mm with 70 parts on 60 nets, routed with 578 tracks and 85 vias.
It is built around the H11L1 and PCM5102PW. Its parts include 29 capacitors, 14 resistors, 8 connectors, 4 ICs and 2 diodes.
Main components
2
H11L1
DIP-6-55℃~+100℃ 1 1.6mA 1Mbit/s 250mW 3V~15V 5kV DC DIP-6 Logic Output Optoisolators ROHSEverlight ElectronicsLogic Output Optoisolators
PCM5102PW
TSSOP-20-25℃~+85℃ 1 3V~3.6V Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special Purpose
README
hardware/README.mdPi-Compute-3-Lite-BLANK
PROJECT HAS BEEN UPDATED TO KICAD V5.0!
The schematic will require some custom parts that can be found in our other repository RPi_CM3_Parts. The schematic contains everything required to get the CM3L to run. The rest of the pins are free to be used for any project. These files are meant to help jumpstart a project that wants to build around the CM3L.
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 47uF | Capacitor_SMD:C_1206_3216Metric | C11, C12, C13, C17, C30, C31 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C6, C15, C16 |
| 4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 100k | Resistors_SMD:R_0402 | R1, R3, R5 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C7, C9 |
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C21, C23, C25 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C20, C22, C24 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C8 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 1N4148 | Diode_SMD:D_SOD-323F | D1, D2 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C26, C27 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C18, C19 |
| 2 | 220R | Resistor_SMD:R_0402_1005Metric | R2, R4 |
| 2 | 4.7uF | Capacitors_SMD:C_0603 | C1, C10 |
| 2 | 4.7uH | Inductor_SMD:L_Bourns-SRN4018 | L1, L2 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | H11L1 | Package_DIP:DIP-6_W7.62mm_SMDSocket_SmallPads | U6, U7 |
| 2 | LCD_PWR | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP5, JP6 |
| 2 | MIDI-IN | Pi-Library:SWITCHCRAFT_57PC5FS | J3, J4 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J7 |
| 1 | Buttons | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J8 |
| 1 | Conn_Coaxial_x2 | Pi-Library:DUALRCA | J2 |
| 1 | DDR2_SODIMM_CM_3_Lite | Pi-Library:Socket_SODIMM_DDR2 | U1 |
| 1 | HD44780 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J6 |
| 1 | PCM5102 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | SD_ebay-uSD-push_push_SMD | Pi-Library:Conn_uSDcard | XS1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
Similar boards
- 2 layers150 × 150 mm
- 2 layers53.5 × 101.8 mm
Sony scopeman
lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.
135 parts69 - 2 layers
T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers55 × 97 mm
Melodio SelfMate V2
zeeblaze/Melodio-SelfMate
Your Ultimate Portable Music Companion For Home Automation.
121 parts53 - 2 layers80 × 65 mm
Squishbox8
GeekFunkLabs/squishbox
Software and design files for a Raspberry Pi sound module enclosure
35 parts51MIT - 2 layers150.5 × 127 mm
Eurorack engine
sinneb/esp32-hvcc
Heavy compiler (hvcc) sources running on ESP32-DevKitC powered eurorack module
81 parts29 - 2 layers39.9 × 54.6 mm
Simplecodec3
cyberomusubi/simplecodec3
Audio input/output board for Raspberry Pi, Jetson Nano (PCM5102A+PCM1808)
44 parts19
Questions
How big is the Pi Compute-3-Lite MT32 PCB?
It measures 76.2 × 104.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pi Compute-3-Lite MT32 use?
70 parts, built around the H11L1 and PCM5102PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pi Compute-3-Lite MT32 KiCad files?
From the peon374/mt32-cm3plus repository on GitHub, at the commit this page was made from: the board is hardware/Pi-Compute-3-Lite_MT32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pi Compute-3-Lite MT32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask peon374 before reusing the design.