2 layers116 × 97 mm
Point controller
penguintutor/modelrailway-point-controller
Model railway point controller
61 parts1GPL-3.0
2 layers40.2 × 67.8 mm
Point controller switches
penguintutor/modelrailway-point-controller1Model railway point controller
- Size
- 40.2 × 67.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 32
- Pads
- 96
- Tracks, vias
- 123, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Apr 2024
- Updated
- 30 Jan 2026
Overview
Point controller switches is an open-source printed circuit board by penguintutor, from the penguintutor/modelrailway-point-controller repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40.2 × 67.8 mm with 30 parts on 32 nets, routed with 123 tracks and 15 vias.
Its parts include 8 resistors, 8 diodes, 4 switches, 2 capacitors and 2 ICs.
README
README.mdModel railway point controller
The model railway point controller provides a way to control up to 4 points using a Raspberry Pi Pico W. It includes a MOSFET based capacitor discharge unit on the PCB and MOSFET controllers for each of the point motors.
It includes a second control board connected by I2C which can be connected to physical LEDs and switches to provide a way to control the points. The points can also be controlled using a web interface which can also be used in conjunction with GUI software to provide a touch screen interface.
Installation
This version needs to be installed on a Raspberry Pi Pico W with the appropriate network enabled MicroPython. MicroPython can be installed through the Thonny editor.
To install the program, copy all the files in the pico-src directory to the top-level of the Raspberry Pi Pico. For the network connection you also need to create a file called secrets.py with details of your SSID and PASSWORD. The example below shows the formatting for the secrets.py file.
SSID="NetworkSSID"
PASSWORD="WiFiPassword"Configuration
The program can be run in two modes.
- Access Point Mode (AP mode) - In this mode the Pico will act as a Wireless Access Point which you can connect to using another WiFi enabled device.
- Client Mode - In this mode you can connect to an existing wireless network
Note that in client mode it is currently blocking and will not operate until it has successfully connected to the network.
The mode is set by editing the entry "mode" in the pico-lights.py file.
mode="ap" # Use as an access point mode="client" # Use as a Wi-Fi client
Running on startup
For the code to run automatically on start-up save the pico-point-controller.py file on your Pico as main.py.
Using without the I2C control board
The board can be used in WiFi only mode, which does not use the I2C based switch and LED board. For that use the file pico-point-controller.wifionly.py instead of pico-point-controller.py (or save as main.py for auto-run)
More Information
For more details see www.penguintutor.com/points
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SW_SPDT_MSM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1, SW2, SW3, SW4 |
| 2 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C2 |
| 2 | MCP23008-xP | Package_DIP:DIP-18_W7.62mm | U1, U2 |
| 1 | I2C Input | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | I2C Output | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
Questions
How big is the Point controller switches PCB?
It measures 40.2 × 67.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Point controller switches use?
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Point controller switches KiCad files?
From the penguintutor/modelrailway-point-controller repository on GitHub, at the commit this page was made from: the board is electronics/point-controller-switches/point-controller-switches.kicad_pcb and its schematic electronics/point-controller-switches/point-controller-switches.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Point controller switches design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from penguintutor/modelrailway-point-controller
1Similar boards
- 2 layers52.2 × 52.2 mm
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
30 parts3kApache-2.0 - 2 layers40.6 × 15.2 mm
- 2 layers270 × 11 mm
Daylight
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
30 parts1.1kGPL-3.0 - 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
30 parts1kGPL-3.0 - 2 layers40.5 × 58 mm
Initial v
tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim
30 parts1kApache-2.0 - 2 layers34.3 × 41.8 mm
MotionCubeViewAllForces
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
30 parts915 - 2 layers57.4 × 62 mm
- 2 layers52.1 × 46.8 mm
