2 layers99.1 × 63.5 mm
2 layers117.3 × 116.8 mm
Assert
pedrodsk/pcb_cadPcb projects
- Size
- 117.3 × 116.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 40
- Pads
- 109
- Tracks, vias
- 205, 6
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Dec 2021
- Updated
- 6 Dec 2021
Overview
Assert is an open-source printed circuit board by pedrodsk, from the pedrodsk/pcb_cad repository on GitHub. It is a 2-layer board of 117.3 × 116.8 mm with 24 parts on 40 nets, routed with 205 tracks and 6 vias.
It is built around the ARDUINO UNO R3 and L7805. Its parts include 7 connectors, 6 resistors, 4 switches, 2 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorised
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdpcb_cad
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 0.33uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3386C_Horizontal | RV1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | GND | Connector:Banana_Jack_1Pin | J5 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U1 |
| 1 | LCD-016N002L | Display:WC1602A | U2 |
| 1 | LED_Small | LED_THT:LED_D3.0mm | D1 |
| 1 | RTC | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J9 |
| 1 | SD | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J8 |
| 1 | Solução 1 | Connector:Banana_Jack_1Pin | J1 |
| 1 | Solução 2 | Connector:Banana_Jack_1Pin | J2 |
| 1 | Solução 3 | Connector:Banana_Jack_1Pin | J3 |
| 1 | Solução 4 | Connector:Banana_Jack_1Pin | J4 |
| 1 | cancelar | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | mais | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | menos | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | selecionar | Button_Switch_THT:SW_PUSH_6mm | SW3 |
Questions
How big is the Assert PCB?
It measures 117.3 × 116.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Assert use?
24 parts, built around the ARDUINO UNO R3 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Assert KiCad files?
From the pedrodsk/pcb_cad repository on GitHub, at the commit this page was made from: the board is Assert/assert/assert.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Assert design in my own project?
Its repository states no licence, so its author keeps all rights: ask pedrodsk before reusing the design.
More from pedrodsk/pcb_cad
7- 2 layers126.4 × 41.3 mm
- 2 layers67.3 × 99.1 mm
- 2 layers
- 2 layers99.7 × 34.3 mm
- 2 layers99.7 × 33 mm
- 2 layers88.9 × 96.5 mm
Similar boards
- 4 layers200 × 142.3 mm
FRED Electrical Scheme KiCAD
GiulianoAgostini04/FRED-Project
Real-time concentration monitoring system based on frontal-lobe EEG signals. Features a custom PCB designed with TinkerCAD and KiCad, OpenBCI Ganglion and Arduino UNO for signal acquisition, display, and frequency-band…
93 parts1MIT - 2 layers
JONICA
mhechavarria/color-caps-classifier
A project made mostly in python to classifie color caps using OpenCV
59 parts - 2 layers120 × 99 mm
PCB 1 Multisheet Schematic
Naman-Bothra/Multisheet_Schematic_KiCAD
my first Multi sheet schematic in KiCAD
10 parts - 2 layers162.6 × 86.4 mm
Bms
akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.
53 parts - 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50