

Protogasm Board V2
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 37
- Pads
- 77
- Tracks, vias
- 84, 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Feb 2021
- Updated
- 15 Jul 2022
Overview
Protogasm Board V2 is an open-source printed circuit board by Edging-Machines, from the Edging-Machines/Edging-Machines repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 53.3 mm with 14 parts on 37 nets, routed with 84 tracks and 3 vias.
It is built around the ARDUINO UNO R3, R-78E5.0-0.5 and MPX5050GP, with the 1N5818BULK and FQP30N06L among its other parts. Its parts include 3 capacitors, 3 ICs, 2 resistors, 2 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorisedR-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesMPX5050GP
SIP-6-40℃~+125℃ 0Kpa~50Kpa 1ms 5V SIP-6 Pressure Sensors ROHSNXP SemiconductorsPressure Sensors1N5818BULK
DO-41Schottky DiodesEIC SemiconFQP30N06L
TO-220-3-55℃~+175℃ 1 N-channel 1.04nF 2.5V 20nC 32A 350pF 35mΩ@10V 60V 65pF 79W N-Channel ±20V TO-220-3 MOSFETs ROHSonsemiMOSFETs
README
Protogasm/Protogasm-Boards/newest_boards/README.mdProtogasm Board V3
Changelog
- Solved the issue with the incorrectly positioned SW1. SW1 should now line up with the case correctly (if I did all my math correctly)
- After a ton of problem solving, figured out a place for the MPX5050GP which should allow it to be used on the board without modifying the board. The constraints that I was considering ended up on User.1 and User.2 layers for future reference. The best solution seemed to be having the pressure sensor rotated and placed in the area of the Arduino without a bunch of tall components, with the valve facing the cutout of the case.
- I had hoped to keep most positions in the same place for this update (just fixing SW1 and MPX5050GP), but after moving the MPX I was forced to essentially update the positions of nearly every component. Additionally, I took the liberty of moving the motor pins closer to the case cutout and also flipped them to the reverse side.
Protogasm Board V2
Changelog
- Recreated the PCB from the Protogasm-Board folder in Kicad with only very minor changes.
- The vast majority of components are exactly lined up with the existing board. I overlaid the existing board's Gerbers with the gerbers of the remake and adjusted positions until stuff matched exactly.
- The general components C1, D1, SW1, and R1 have slightly different footprints because I was using the Kicad builtin footprints. They aren't pixel perfect but still overall in the same positions.
- I didn't want to just have loose pins for the motor connections and neopixel connections so I created actual components for them, this means I had to move them so that's one thing that has changed significantly in this board.
- Added the Arduino mounting holes, mostly so that it will be easier to test alignment of this board and the case.
- Overall, the idea is that if someone wants to change the Protogasm-Board but doesn't want the other changes that I'd like to make, they could start from this commit.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2, C3 |
| 1 | 0u1 | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 1N5818-B | Diode_THT:D_A-405_P7.62mm_Horizontal | D1 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3_WithMountingHoles | U1 |
| 1 | FQP30N06L | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | Jack-DC | custom-footprints:2.1mm DC Barrel Jack | J2 |
| 1 | MPX5050GP | custom-footprints:MPX5050GP | U2 |
| 1 | Motor_DC | custom-footprints:Motor_DC_WirePins | M1 |
| 1 | Neopixel_Ring_Header | custom-footprints:Neopixel_Ring_WirePins | J1 |
| 1 | R-78E5.0-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U3 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW1 |
| 1 | TRIMPOT | custom-footprints:uxcell_TRIMPOT | R2 |
Similar boards
- 4 layers54.8 × 83.5 mm

- 2 layers114 × 99 mm

ECG Blood Pressure Final
Xeretis/SPRO2Hardware
Hardware (KiCad) files for Electronics Semester Project 2
83 parts - 2 layers69.1 × 53.8 mm

- 2 layers99 × 54.9 mm

- 2 layers76.2 × 48.9 mm

Epaper clock
mattwach/epaper_clock
Autosetting clock based on an epaper display. Runs about a year on batteries and has basic weather telemetry (temperature, pressure, humidity).
14 parts48Apache-2.0 - 2 layers134 × 91 mm

- 2 layers98 × 83.8 mm

Projeto placa
phfbertoleti/placa_lorawan
Repositório oficial da placa LoRaWAN, um kit de desenvolvimento para protótipos IoT.
39 parts19MIT - 2 layers84 × 134.5 mm

Questions
How big is the Protogasm Board V2 PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Protogasm Board V2 use?
14 parts, built around the ARDUINO UNO R3, R-78E5.0-0.5, MPX5050GP and 1N5818BULK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Protogasm Board V2 KiCad files?
From the Edging-Machines/Edging-Machines repository on GitHub, at the commit this page was made from: the board is Protogasm/Protogasm-Boards/newest_boards/Protogasm-Board-V2.kicad_pcb and its schematic Protogasm/Protogasm-Boards/newest_boards/Protogasm-Board-V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Protogasm Board V2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).