
Unni smartification c6-10.99-constraints
lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices

Glyph-C6
Esp32c6 is an open-source printed circuit board by pcbcupid, from the pcbcupid/PCBCUPID-Glyph-C6 repository on GitHub. It is a 2-layer board of 50.8 × 22.9 mm with 66 parts on 57 nets, routed with 411 tracks and 62 vias.
It is built around the ESP32-C6-MINI-1-N4, MCP73831 and SS34, with the SI2301 among its other parts. Its parts include 13 resistors, 7 capacitors, 5 connectors, 3 ICs and 3 diodes. It belongs with the ESP32 and RISC-V boards of this library.

This repo contains open source PCB files for PCBCUPID Glyph C6 This particular PCB is designed using Kicad v8.0
This design has been built and tested successfully! For more details, check out the product pages at
We are here to build India's largest open source hardware community, If you like to support please consider buying the product from the above link!
Creative Commons Attribution, Share-Alike license All text above must be included in any redistribution
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R7, R9 |
| 5 | 10uf | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C6, C7 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R6, R8 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | G*** | kibuzzard-668B789B | kibuzzard-668B789B, kibuzzard-668B789B |
| 2 | G*** | kibuzzard-668B7A62 | kibuzzard-668B7A62, kibuzzard-668B7A62 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW2 |
| 1 | 10UF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AP2112K-3.3 / XC6210B332MR | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Battery Connector | Test_point_01x2:TestPoint_01x02 | J3 |
| 1 | Conn_01x12 | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J2 |
| 1 | Conn_01x16 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J4 |
| 1 | ESP32-C6-MINI-1-N4 | ESP32C6:ESP32-C6-MINI-1_EXP | U4 |
| 1 | G*** | kibuzzard-668D1621 | kibuzzard-668D1621 |
| 1 | G*** | kibuzzard-668D15C1 | kibuzzard-668D15C1 |
| 1 | G*** | kibuzzard-668D176A | kibuzzard-668D176A |
| 1 | G*** | kibuzzard-668D175C | kibuzzard-668D175C |
| 1 | G*** | kibuzzard-668D15F7 | kibuzzard-668D15F7 |
| 1 | G*** | kibuzzard-668D17D6 | kibuzzard-668D17D6 |
| 1 | G*** | kibuzzard-668D170D | kibuzzard-668D170D |
| 1 | G*** | kibuzzard-668D17D0 | kibuzzard-668D17D0 |
| 1 | G*** | kibuzzard-668D16B5 | kibuzzard-668D16B5 |
| 1 | G*** | kibuzzard-668D1619 | kibuzzard-668D1619 |
| 1 | G*** | kibuzzard-668CCB9F | kibuzzard-668CCB9F |
| 1 | G*** | kibuzzard-668CCB83 | kibuzzard-668CCB83 |
| 1 | G*** | kibuzzard-668D15B0 | kibuzzard-668D15B0 |
| 1 | G*** | kibuzzard-668D171B | kibuzzard-668D171B |
| 1 | G*** | kibuzzard-668D1756 | kibuzzard-668D1756 |
| 1 | G*** | kibuzzard-668D15F0 | kibuzzard-668D15F0 |
| 1 | G*** | kibuzzard-668B7A7C | kibuzzard-668B7A7C |
| 1 | G*** | kibuzzard-668D1727 | kibuzzard-668D1727 |
| 1 | G*** | kibuzzard-668D15B6 | kibuzzard-668D15B6 |
| 1 | G*** | kibuzzard-668D1715 | kibuzzard-668D1715 |
| 1 | G*** | kibuzzard-668D1721 | kibuzzard-668D1721 |
| 1 | JST | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5 |
| 1 | MCP73831 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW3 |
| 1 | Si2301 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SolderJumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | fuse | Fuse:Fuse_0805_2012Metric | F1 |

lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices

nathanfraske/CEC-Platform
ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

potpurri/LiPo_Charger_TP4056_BuckBoost_TPS63020
This PCB is designed to safely charge a lithium-ion cell and provide a selectable 3.3V or 5V output. It's equipped with components that ensure safe charging and protection for the battery and supports flexible output…




ottermarine/pypilot_controller
A repo for working on a snapshot of a PyPilot motor controller from SdE

potpurri/A1-External-ESP8266-Cooling-Fan-Module
ESP8266-board driving an external fan for improved cooling of nozzle and prints
It measures 50.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
66 parts, built around the ESP32-C6-MINI-1-N4, MCP73831, SS34 and SI2301. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pcbcupid/PCBCUPID-Glyph-C6 repository on GitHub, at the commit this page was made from: the board is esp32c6.kicad_pcb and its schematic esp32c6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pcbcupid before reusing the design.