pcbcupid/PCBCUPID-Glyph-C37Glyph-C3
Esp32c3 is an open-source printed circuit board by pcbcupid, from the pcbcupid/PCBCUPID-Glyph-C3 repository on GitHub. It is a 2-layer board of 50.8 × 22.9 mm with 65 parts on 57 nets, routed with 386 tracks and 62 vias.
It is built around the ESP32-C3-MINI-1-N4, SS34 and SI2301. Its parts include 13 resistors, 7 capacitors, 5 connectors, 3 ICs and 3 diodes. It belongs with the ESP32 and RISC-V boards of this library.
This repo contains open source PCB files for PCBCUPID Glyph C3 This particular PCB is designed using Kicad v8.0
This design has been built and tested successfully! For more details, check out the product pages at
We are here to build India's largest open source hardware community, If you like to support please consider buying the product from the above link!
Creative Commons Attribution, Share-Alike license All text above must be included in any redistribution
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R7, R9 |
| 4 | 10uf | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C6 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R6, R8 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | G*** | kibuzzard-668B789B | kibuzzard-668B789B, kibuzzard-668B789B |
| 2 | G*** | kibuzzard-668B7A62 | kibuzzard-668B7A62, kibuzzard-668B7A62 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW2 |
| 1 | 0.1uf | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 10UF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | AP2112K-3.3 / XC6210B332MR | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Battery Connector | Test_point_01x2:TestPoint_01x02 | J3 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5 |
| 1 | Conn_01x12 | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J2 |
| 1 | Conn_01x16 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J4 |
| 1 | ESP32-C3-MINI-1-N4 | ESP32C3:ESP32-H2-MINI-1_EXP | U4 |
| 1 | G*** | kibuzzard-668B7A0A | kibuzzard-668B7A0A |
| 1 | G*** | kibuzzard-668CCDA5 | kibuzzard-668CCDA5 |
| 1 | G*** | kibuzzard-668B7A7C | kibuzzard-668B7A7C |
| 1 | G*** | kibuzzard-668B7995 | kibuzzard-668B7995 |
| 1 | G*** | kibuzzard-668CE341 | kibuzzard-668CE341 |
| 1 | G*** | kibuzzard-668CCD89 | kibuzzard-668CCD89 |
| 1 | G*** | kibuzzard-668B7879 | kibuzzard-668B7879 |
| 1 | G*** | kibuzzard-668CCB83 | kibuzzard-668CCB83 |
| 1 | G*** | kibuzzard-668CE34C | kibuzzard-668CE34C |
| 1 | G*** | kibuzzard-668B79F7 | kibuzzard-668B79F7 |
| 1 | G*** | kibuzzard-668B795C | kibuzzard-668B795C |
| 1 | G*** | kibuzzard-668B79B7 | kibuzzard-668B79B7 |
| 1 | G*** | kibuzzard-668B7A1E | kibuzzard-668B7A1E |
| 1 | G*** | kibuzzard-668CCD9D | kibuzzard-668CCD9D |
| 1 | G*** | kibuzzard-668CCDB1 | kibuzzard-668CCDB1 |
| 1 | G*** | kibuzzard-668B797C | kibuzzard-668B797C |
| 1 | G*** | kibuzzard-668B7A2D | kibuzzard-668B7A2D |
| 1 | G*** | kibuzzard-668CCC45 | kibuzzard-668CCC45 |
| 1 | G*** | kibuzzard-668CCD74 | kibuzzard-668CCD74 |
| 1 | G*** | kibuzzard-668CCB9F | kibuzzard-668CCB9F |
| 1 | G*** | kibuzzard-668CCC52 | kibuzzard-668CCC52 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW3 |
| 1 | Si2301 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SolderJumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
potpurri/LiPo_Charger_TP4056_BuckBoost_TPS63020
This PCB is designed to safely charge a lithium-ion cell and provide a selectable 3.3V or 5V output. It's equipped with components that ensure safe charging and protection for the battery and supports flexible output…
ottermarine/pypilot_controller
A repo for working on a snapshot of a PyPilot motor controller from SdE
potpurri/A1-External-ESP8266-Cooling-Fan-Module
ESP8266-board driving an external fan for improved cooling of nozzle and prints
potpurri/LIR2032-charger
Charing board for LIR2032 batteries (or other lithium type button/coin cell batteries with the same diamater and mx voltage of 4.2V)
It measures 50.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
65 parts, built around the ESP32-C3-MINI-1-N4, SS34 and SI2301. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pcbcupid/PCBCUPID-Glyph-C3 repository on GitHub, at the commit this page was made from: the board is esp32c3.kicad_pcb and its schematic esp32c3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pcbcupid before reusing the design.