

Water pump controller
A prototype for an entry level 1HP water pump controller for home use with automatic pump turn OFF feature when the tank is full and alert with a blinking led light and buzzer sound.
- Size
- 58.6 × 51.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 18
- Pads
- 66
- Tracks, vias
- 104, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Sep 2025
- Updated
- 14 Sep 2025
Overview
Water pump controller is an open-source printed circuit board by PCB-tracer, from the PCB-tracer/Water-Watcher repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 58.6 × 51.7 mm with 26 parts on 18 nets, routed with 104 tracks and 1 via.
It is built around the NE556. Its parts include 7 resistors, 4 capacitors, 4 diodes, 4 connectors and 2 transistors.
Main components
1Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x02_Pin | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J2, J3, J4 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R4, R7 |
| 2 | 0.01u | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C3 |
| 2 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2, D4 |
| 2 | BC549 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D3 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C4 |
| 1 | 400k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 50k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
| 1 | 50u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | NE556 | Package_DIP:CERDIP-14_W7.62mm_SideBrazed | U1 |
| 1 | RAYEX-L90AS | Relay_THT:Relay_SPST_RAYEX-L90AS | K1 |
The 24 most common of 26 parts.
Similar boards
- 4 layers184.2 × 169.5 mm

- 2 layers100 × 77.5 mm

- 2 layers100 × 77.5 mm

- 4 layers163 × 174.4 mm

Gd rev3b
baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!
440 parts33MIT - 4 layers330.2 × 215.9 mm

- 2 layers134.6 × 106.4 mm

Renovation ssi 2001
roybaer/renovation_ssi_2001
Innovation SSI-2001 replica that can be built without vintage components
95 parts26 - 2 layers70.8 × 108.5 mm

- 2 layers88.9 × 63.5 mm

AlpenglowSMTGarden
AlpenglowIndustries/Alpenglow_SMTGarden_PCB
A fun kit with lots of blinky lights and 555 timers that gives you lots of practice with different sizes of surface mount components
155 parts11MIT
Questions
How big is the Water pump controller PCB?
It measures 58.6 × 51.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Water pump controller use?
26 parts, built around the NE556. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Water pump controller KiCad files?
From the PCB-tracer/Water-Watcher repository on GitHub, at the commit this page was made from: the board is Water pump controller.kicad_pcb and its schematic Water pump controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Water pump controller design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).