

Controlador Temporizador Insoladora
- Size
- 132.1 × 67.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 71
- Pads
- 241
- Tracks, vias
- 299, 6
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Apr 2015
- Updated
- 31 Aug 2015
Overview
Controlador Temporizador Insoladora is an open-source printed circuit board by pblfrnndmnr, from the pblfrnndmnr/Kicad-projects repository on GitHub. It is a 2-layer board of 132.1 × 67.3 mm with 87 parts on 71 nets, routed with 299 tracks and 6 vias.
It is built around the PIC16F871-E/P, MOC3031M and BC548. Its parts include 30 resistors, 14 capacitors, 11 connectors, 7 transistors and 6 diodes. It belongs with the PIC boards of this library.
Main components
3PIC16F871-E/P
PDIP-40-40℃~+125℃ 128Byte 20MHz 3.5KB 33 4V~5.5V 64Byte 8 Bit External FLASH PIC PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)MOC3031M
DIP-6-40℃~+85℃ 1.25V 250mW 4.17kV 6V DC DIP-6 Transistor, Photovoltaic Output Optoisolators ROHSonsemiOptocouplers - Phototransistor OutputBC548
TO-92TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 220 | Discret:R3 | R2, R3, R4, R5, R6, R7, R8, R9, R14, R17, R21, R24 |
| 9 | 100nF | Capacitors_ThroughHole:C_Rect_L4_W2.5_P2.5 | C1, C2, C3, C4, C5, C10, C11, C12, C14 |
| 9 | 10K | Discret:R3 | R11, R16, R20, R22, R25, R26, R27, R28, R29 |
| 7 | BC548 | Housings_TO-92:TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 4 | 1K | Discret:R3 | R10, R12, R13, R30 |
| 3 | 1N4007 | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D2, D3, D6 |
| 3 | OPTO | Connect:bornier2 | P6, P8, P9 |
| 2 | 1000uF | Capacitors_ThroughHole:C_Radial_D10_L16_P5 | C8, C9 |
| 2 | 1n4148 | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D1, D4 |
| 2 | 20pF | Capacitors_ThroughHole:C_Rect_L4_W2.5_P2.5 | C6, C7 |
| 1 | 100 | Discret:R3 | R15 |
| 1 | 10k | Discret:R3 | R1 |
| 1 | 10nF | Capacitors_ThroughHole:C_Rect_L13_W4_P10 | C13 |
| 1 | 1k | Discret:R3 | R19 |
| 1 | 330 | Discret:R3 | R18 |
| 1 | 39 | Discret:R3 | R23 |
| 1 | 3A | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_open_lateral_Type-II | F1 |
| 1 | 7805 | Discret:LM78XXV | U1 |
| 1 | BAJAR | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW3 |
| 1 | CARGA | Connect:bornier2 | P3 |
| 1 | CONN_01X08 | Socket_Strips:Socket_Strip_Straight_1x08 | P10 |
| 1 | CONN_02X08 | Socket_Strips:Socket_Strip_Straight_2x08 | P7 |
| 1 | Crystal_Small | Crystals:Crystal_HC50-U_Vertical | Y1 |
| 1 | D_Small | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D5 |
| 1 | GPI1 | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW4 |
| 1 | ICSP | Pin_Headers:Pin_Header_Straight_1x06 | P1 |
| 1 | INICIAR/PARAR | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW5 |
| 1 | MOC3031M | Opto-Devices:Optocoupler_6pin_wide_Stile-I | U3 |
| 1 | PIC16f871 | Housings_DIP:DIP-40__600 | U2 |
| 1 | PuenteVDC | Socket_Strips:Socket_Strip_Straight_1x02 | P11 |
| 1 | S05K275 | Capacitors_ThroughHole:C_Rect_L13_W4_P10 | VR1 |
| 1 | SUBIR | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW2 |
| 1 | TRANSF | Connect:bornier2 | P4 |
| 1 | TRIAC | Transistors_TO-220:TO-220_Neutral123_Horizontal_LargePads | U4 |
| 1 | VAC | Connect:bornier3 | P5 |
| 1 | VAC12V | Connect:bornier3 | P2 |
The 79 most common of 87 parts.
More from pblfrnndmnr/Kicad-projects
5- 2 layers172.7 × 40.6 mm

- 2 layers53.3 × 40.6 mm

- 2 layers55.9 × 38.1 mm

- 2 layers41.9 × 32.4 mm

- 2 layers

Similar boards
- 2 layers178 × 145 mm

Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers131.8 × 99.9 mm

- 4 layers99.6 × 99.8 mm

- 2 layers200 × 96 mm

Touchtone555
DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus
73 parts33 - 2 layers177.8 × 130.8 mm

- 2 layers236.8 × 169.8 mm

TK2000
clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II
212 parts17 - 2 layers100 × 65.5 mm

SodaIDE v2 konami case
Danjovic/Soda-IDE
8 bit Compact Flash Interface for MSX computers
30 parts11CC0-1.0 - 2 layers213 × 130 mm

Max48 ISSUE4
alvaroalea/all-spectrum-clones
Schematic of a 8bit computer, clone of Sinclair ZX Spectrum
186 parts10
Questions
How big is the Controlador Temporizador Insoladora PCB?
It measures 132.1 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controlador Temporizador Insoladora use?
87 parts, built around the PIC16F871-E/P, MOC3031M and BC548. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controlador Temporizador Insoladora KiCad files?
From the pblfrnndmnr/Kicad-projects repository on GitHub, at the commit this page was made from: the board is Temporizador Insoladora/Controlador-temporizador/Controlador-Temporizador Insoladora.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controlador Temporizador Insoladora design in my own project?
Its repository states no licence, so its author keeps all rights: ask pblfrnndmnr before reusing the design.