2 layers80 × 35 mm
2 layers61.7 × 46.7 mm
Epaperle
pavels/epaperle2- Size
- 61.7 × 46.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 44
- Pads
- 113
- Tracks, vias
- 326, 10
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Jan 2018
- Updated
- 8 Jan 2018
Overview
Epaperle is an open-source printed circuit board by pavels, from the pavels/epaperle repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 61.7 × 46.7 mm with 29 parts on 44 nets, routed with 326 tracks and 10 vias.
It is built around the BLE112-A-V1, MBR0530 and BAT-HLD-001, with the SI1304BDL among its other parts. Its parts include 14 capacitors, 3 diodes, 2 ICs, 2 transistors and 1 resistor.
Main components
4
BLE112-A-V1
-Power-on Reset、Power-off reset function - RF Transceiver ICs ROHSSilicon LabsRF Transceiver ICs
MBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
BAT-HLD-001
SMDSMD Button And Strip Battery Connector ROHSTE ConnectivityButton And Strip Battery Connector
SI1304BDL
SOT-323-55℃~+150℃ 1 N-channel 1.2V 14.8pF 146pF 18.3pF 30V 360mW 450mΩ@4.5V 5.2nC@4.5V 800mA SOT-323 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdSee project page: https://hackaday.io/project/29529-epaperle
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1uF | Capacitors_SMD:C_1206 | C8, C9, C10, C11, C12, C13, C14 |
| 4 | HOLE | Mounting_Holes:MountingHole_3.2mm_M3_Pad | HOLE1, HOLE2, HOLE3, HOLE4 |
| 3 | 100nF | Capacitors_SMD:C_1206 | C2, C3, C4 |
| 3 | MBR0530 | Diodes_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | 2.2uF | Capacitors_SMD:C_1206 | C6, C7 |
| 1 | 100uF/6.3V | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Reflow | C1 |
| 1 | 3R | Resistors_SMD:R_1206 | R1 |
| 1 | 4.7uF | Capacitors_SMD:C_1206 | C5 |
| 1 | BAT-HLD-001 | bathold:BAT-HLD-001 | BT1 |
| 1 | BLE112-A | bluegiga:BLE112-A | IC1 |
| 1 | CONN_5 | smd_pads_array:PAD_1.5mm*2.5mm_5x100mil | P1 |
| 1 | GDE021A1 | Fpc:Hirose_FH12A-24S-0.5SH | U2 |
| 1 | Q_PMOS_GSD | TO_SOT_Packages_SMD:SOT-323_SC-70 | Q2 |
| 1 | SDR6603-220M | Inductors:SDR6603 | L1 |
| 1 | Si1304BDL | TO_SOT_Packages_SMD:SOT-323_SC-70 | Q1 |
Questions
How big is the Epaperle PCB?
It measures 61.7 × 46.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Epaperle use?
29 parts, built around the BLE112-A-V1, MBR0530, BAT-HLD-001 and SI1304BDL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Epaperle KiCad files?
From the pavels/epaperle repository on GitHub, at the commit this page was made from: the board is hardware/epaperle.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Epaperle design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers59.2 × 29.2 mm
ESP32-Eink
Outdatedcandy92/ESP32-Eink
A tiny E-Ink display driver board featuring an ESP32-C3 and an onboard battery charging IC. It wirelessly drives a 2.13-inch E-Ink display and is designed for portable, ultra-low-power projects such as status displays…
83 partsCERN-OHL-W-2.0 - 2 layers40 × 52 mm
Slock
sdeleers/esloq
Esloq is a startup I worked on from 2014 to 2016. All code written by Kenny Kuchera and me.
52 parts - 2 layers
- 2 layers45 × 75.2 mm
- 2 layers34.1 × 33.6 mm
EPaperBreakout
FeatureNAB/air-sensor
Smart Air Quality Sensor built using ESP32, SEN66 and ESPHome
31 parts171 - 2 layers80 × 33.5 mm
Tomogatchi
chimmmmy/echain
software to control a smart keychain with an e ink display, powered by seed studio nrf52840
25 parts1GPL-3.0 - 2 layers34.7 × 22.2 mm
ESP32 Weather
ANSHUMANDOCX/ESP32-Weather-Dashboard
ESP32 weather dashboard using a 3.7 inch eink display
23 parts