Skip to the content
2 layers14.8 × 8 mmFlashlight, the printed circuit board in 3D
Size
14.8 × 8 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
9
Pads
49
Tracks, vias
67, 8
Pours
9
Routed
Yes
KiCad
KiCad 4
Created
5 Mar 2017
Updated
20 Feb 2019

Overview

Flashlight is an open-source printed circuit board by pavel-demin, from the pavel-demin/flashlight repository on GitHub. It is a 2-layer board of 14.8 × 8 mm with 25 parts on 9 nets, routed with 67 tracks and 8 vias.

It is built around the PIC10F320-E/P and TPS61200DRC. Its parts include 3 capacitors, 2 resistors, 2 ICs and 1 inductor. It belongs with the PIC boards of this library.

Main components

2

Parts

25
QtyValueFootprintReferences
9VIAmodules:VIA-0.6mmVIA1, VIA2, VIA3, VIA4, VIA5, VIA6, VIA7, VIA8, VIA9
2PINmodules:PIN-1.0mmPIN1, PIN2
1+LEDmodules:PAD-1.5mm+
110umodules:0805C1
11Mmodules:0805R2
11umodules:0805C3
12modules:0805R1
12.2umodules:XFL4020L1
122umodules:0805C2
1LED-modules:PAD-1.5mm-
1MCLRmodules:PAD-1.0mmMCLR
1PCLKmodules:PAD-1.0mmPCLK
1PDATmodules:PAD-1.0mmPDAT
1PIC10F320modules:MCIC2
1TPS61200modules:DRCIC1
1VDDmodules:PAD-1.0mmVDD

More from pavel-demin/flashlight

1
  • 2 layers18 × 14.5 mmProgrammer, the printed circuit board in 3D

    Programmer

    pavel-demin/flashlight

    9 parts2

Similar boards

  • 4 layers35.1 × 76.3 mmTiny4FSK, the printed circuit board in 3D

    Tiny4FSK

    New-England-Weather-Balloon-Society/Tiny4FSK

    Horus Binary v2 HAB Tracker

    90 parts96CERN-OHL-W-2.0
  • 4 layers61.8 × 79.6 mmShipwrecked pcb, the printed circuit board in 3D

    Shipwrecked pcb

    mpkendall/shipwrecked-pcb

    Shipwrecked PCB Badges

    153 parts17Unlicense
  • 2 layers56 × 56 mmPiPower v2, the printed circuit board in 3D

    PiPower v2

    wyolum/pi-power

    Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.

    81 parts4MIT
  • 2 layers38.1 × 50.8 mmSAO Demo Controller, the printed circuit board in 3D

    SAO Demo Controller

    ageppert/SAO_Demo_Controller

    A small inline SAO with an RP2040 used to demo SAOs that require smarts, but don't have it built-in.

    59 parts3
  • 2 layers54 × 100 mmChatter charger, the printed circuit board in 3D

    Chatter charger

    Racer159/chatter-charger

    A LiIon/LiFePo/NiMH Charger Backpack for the CircuitMess Chatter v2

    30 parts1
  • 2 layers63.5 × 21 mmLanding Light, the printed circuit board in 3D

    Landing Light

    About-Time-Technologies/Stage-Landing-Lights

    47 parts
  • 2 layers30.5 × 20.3 mmOntvanger, the printed circuit board in 3D

    Ontvanger

    bovdham/pcb_stop

    pcb files for the stop quest project

    19 partsGPL-3.0
  • 2 layers91.6 × 53.3 mmPortableArduinoShield, the printed circuit board in 3D

    PortableArduinoShield

    DariusSasarman/Portable-Arduino-UNO-Shield

    🛡️⚡🔋🔌📱An Arduino UNO shield that makes the board portable and USB-C compatible. Made in KiCad

    34 parts

Questions

How big is the Flashlight PCB?

It measures 14.8 × 8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Flashlight use?

25 parts, built around the PIC10F320-E/P and TPS61200DRC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flashlight KiCad files?

From the pavel-demin/flashlight repository on GitHub, at the commit this page was made from: the board is pcb/flashlight.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flashlight design in my own project?

Its repository states no licence, so its author keeps all rights: ask pavel-demin before reusing the design.