Skip to the content
2 layers91.6 × 53.3 mmPortableArduinoShield, the printed circuit board in 3D

🛡️⚡🔋🔌📱An Arduino UNO shield that makes the board portable and USB-C compatible. Made in KiCad

Size
91.6 × 53.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
48
Pads
174
Tracks, vias
358, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Jun 2026
Updated
17 Jun 2026

Overview

PortableArduinoShield is an open-source printed circuit board by DariusSasarman, from the DariusSasarman/Portable-Arduino-UNO-Shield repository on GitHub. It is a 2-layer board of 91.6 × 53.3 mm with 34 parts on 48 nets, routed with 358 tracks and 0 vias.

It is built around the CH340E, TPS61200DRC and USBLC6-2SC6. Its parts include 7 capacitors, 7 resistors, 5 connectors, 3 ICs and 2 diodes.

Main components

3

README

README.md

Portable-Arduino-UNO-Shield

KiCad

What is it?

A shield that you can use to upgrade older Arduino UNO boards such that your projects don't need extra batteries nor cables. Just the one your phone uses!

How does it look?

image

Physical details:

  • Input: USB-C (5V, up to 2A for charging)
  • Battery: 14500 Li-ion Rechargeable (3.7V, 500mAh)
  • Output: 5V through boost converter ( -0.6V diode voltage drop when running on usb-c !!! )
  • Board Size: Aprox. 91.5 × 53.4 mm

Main components

  • Charging IC: Handles the Li-ion charging (MCP73831-2-OT)
  • Boost Converter: Steps up 3.7V from the battery to 5V for the Arduino (TPS61200DRC)
  • MOSFET: Disconects the battery from output when current is fed from USB (PMOS)
  • Reverse Blocking Diode: Makes sure current doesn't flow backward
  • ESD Diode: Protects against static discharge on the USB data lines (USBLC6-2SC6)
  • USB to UART converter: Translates the data lines to actual information (CH340E)

Installation & usage

  1. Pop the 14500 battery into the holder( image Watch the polarity!)
  2. Stack the shield onto your Arduino UNO
  3. Plug in USB-C to charge (the LED being on means the battery charging)
  4. When done charging, unplug and turn on the switch!

Schematic

image

How would this prove useful?

Ever had a project that needed the arduino to be mounted somewhere such that a USB connection couldn't have been possible? I did.

How did I make it?

I build it by integrating both a standard Li-ion charging circuit (MCP73831 reference design) with a boost converter topology and a USB-serial interface. Added my own custom changes to these, such as the LED and battery switch. It has been a wonderful experiment.

Key Learnings: decoupling capacitors, pull-down resistors, step-up boost converters usage, usb-to-uart translation as a requirement.

Parts

34
QtyValueFootprintReferences
4MountingHole_3.2mmArduino_MountingHole:MountingHole_3.2mmMH1, MH2, MH3, MH4
34.7uFCapacitor_SMD:C_0603_1608MetricC4, C6, C7
25.1kResistor_SMD:R_0603_1608MetricR1, R2
1
1100nCapacitor_SMD:C_0603_1608MetricC2
110kResistor_SMD:R_0603_1608MetricR7
110nCapacitor_SMD:C_0603_1608MetricC1
1180kResistor_SMD:R_0603_1608MetricR4
11kResistor_SMD:R_0603_1608MetricR5
11uFCapacitor_SMD:C_0603_1608MetricC3
12.2uHInductor_SMD:L_Bourns-SRN4018L1
122uFCapacitor_SMD:C_0603_1608MetricC5
12MResistor_SMD:R_0603_1608MetricR3
1470Resistor_SMD:R_0603_1608MetricR6
1500mAhBattery:BatteryHolder_Keystone_1042_1x18650BT1
1AnalogConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ3
1CH340EPackage_SO:MSOP-10_3x3mm_P0.5mmU2
1D_SchottkyDiode_SMD:D_SOD-123D2
1Digital/PWMConnector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ2
1Digital/PWMConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ4
1LEDLED_SMD:LED_0603_1608MetricD1
1MCP73831-2-OTPackage_TO_SOT_SMD:SOT-23-5U3
1PMOSPackage_TO_SOT_SMD:SOT-23Q1
1PowerConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ1
1SW_Nidec_CAS-120A1Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2QSW1
1TPS61200DRCPackage_SON:Texas_S-PVSON-N10_ThermalViasU1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6VCC1
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_Amphenol_12401610E4-2AJ5

Similar boards

  • 4 layers18 × 63 mmTiny4FSK, the printed circuit board in 3D

    Tiny4FSK

    mpkendall/gumstik

    a tiny uav flight computer

    86 partsCERN-OHL-W-2.0
  • 4 layers35.1 × 76.3 mmTiny4FSK, the printed circuit board in 3D

    Tiny4FSK

    New-England-Weather-Balloon-Society/Tiny4FSK

    Horus Binary v2 HAB Tracker

    90 parts96CERN-OHL-W-2.0
  • 4 layers61.8 × 79.6 mmShipwrecked pcb, the printed circuit board in 3D

    Shipwrecked pcb

    mpkendall/shipwrecked-pcb

    Shipwrecked PCB Badges

    153 parts17Unlicense
  • 2 layers56 × 56 mmPiPower v2, the printed circuit board in 3D

    PiPower v2

    wyolum/pi-power

    Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.

    81 parts4MIT
  • 2 layers38.1 × 50.8 mmSAO Demo Controller, the printed circuit board in 3D

    SAO Demo Controller

    ageppert/SAO_Demo_Controller

    A small inline SAO with an RP2040 used to demo SAOs that require smarts, but don't have it built-in.

    59 parts3
  • 2 layers14.8 × 8 mmFlashlight, the printed circuit board in 3D

    Flashlight

    pavel-demin/flashlight

    25 parts2
  • 2 layers54 × 100 mmChatter charger, the printed circuit board in 3D

    Chatter charger

    Racer159/chatter-charger

    A LiIon/LiFePo/NiMH Charger Backpack for the CircuitMess Chatter v2

    30 parts1
  • 2 layers63.5 × 21 mmLanding Light, the printed circuit board in 3D

    Landing Light

    About-Time-Technologies/Stage-Landing-Lights

    47 parts

Questions

How big is the PortableArduinoShield PCB?

It measures 91.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PortableArduinoShield use?

34 parts, built around the CH340E, TPS61200DRC and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PortableArduinoShield KiCad files?

From the DariusSasarman/Portable-Arduino-UNO-Shield repository on GitHub, at the commit this page was made from: the board is PortableArduinoShield.kicad_pcb and its schematic PortableArduinoShield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PortableArduinoShield design in my own project?

Its repository states no licence, so its author keeps all rights: ask DariusSasarman before reusing the design.