Skip to the content
2 layers68.6 × 63.5 mmRiego, the printed circuit board in 3D

Arduino - HomeAssistant irrigation controller

Size
68.6 × 63.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
28
Pads
100
Tracks, vias
124, 0
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
27 Jan 2025
Updated
29 May 2026

Overview

Riego is an open-source printed circuit board by paulino, from the paulino/irrigation32 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 68.6 × 63.5 mm with 29 parts on 28 nets, routed with 124 tracks and 0 vias.

It is built around the M2.5. Its parts include 6 capacitors, 2 resistors, 2 ICs, 1 diode and 1 fuse. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

Irrigation 32

Irrigation 32 is an irrigation controller project programmed with Arduino that runs on an ESP32-C3. It is integrated with Home Assistant via MQTT-Discovery. Additionally, a custom PCB has been designed to control four solenoid valves.

Irrigation 32 overview

Irrigation 32 is a DIY project with the following main features:

  • HomeAssistant integration
  • Support for four solenoid valves
  • OLED display
  • Manual control via buttons
  • Custom PCB intended to connect to a battery/solar power source PCB preview

Documentation

Detailed documentation is available in the doc folder in Spanish. The documentation source is not well formatted on GitHub, it can be compiled with Sphinx or read at https://blog.20cones.org/manuales/irrigation32

HomeAssistant integration

The images below show a custom dashboard imported from a YAML file dashboard.yaml. The dashboard is in Spanish but it is easy to translate.

All the entities are automatically discovered by HomeAssistant via MQTT-Discovery when the device is connected to the network and the MQTT broker is configured.

Home Assistant integration Home Assistant integration

Preview

Irrigation 32 demo

License

Copyright 2025 - Paulino Ruiz de Clavijo Vázquez pruiz@us.es

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 or at the LICENSE file.

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Parts

29
QtyValueFootprintReferences
41500uCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC1, C2, C3, C4
4M2.5MountingHole:MountingHole_2.7mm_M2.5MH1, MH2, MH3, MH4
4TerminalBlockTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalEV1, EV2, EV3, EV4
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalHEVS1, RLCT1
112vTerminalBlock:TerminalBlock_bornier-2_P5.08mmB1
1130KResistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P7.62mm_VerticalR2
11500uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC5
11AFuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_OpenF1
133ufCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC6
1750KResistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P7.62mm_VerticalR1
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJRV1
1Conn_02x3Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalBNT1
1Conn_02x4Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalVCC1
1Conn_02x4Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalPW5V1
1Conn_JST_02x4Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalDISPLAY1
1DDiode_THT:D_DO-201_P12.70mm_HorizontalD1
1ESP32-C3_SUPERMINIesp32-custom:ESP32-C3_SUPERMINIU1
1LM7812CV_TO220Package_TO_SOT_THT:TO-220-3_VerticalREG1
1mini560mini560:mini560U2

Similar boards

  • 2 layers40.9 × 85 mmStudio mic, the printed circuit board in 3D

    Studio mic

    Spirit532/studio_mic

    A simple, easy to build preamplifier for any true condenser capsule, to make a condenser microphone

    63 parts150MIT
  • 2 layers65 × 56 mmPi1541io, the printed circuit board in 3D

    Pi1541io

    hackup/Pi1541io

    Raspberry Pi extension board for the PI1541 project.

    57 parts109CC-BY-SA-4.0
  • 2 layers65 × 56 mmClumsyMIDI, the printed circuit board in 3D

    ClumsyMIDI

    gmcn42/clumsyMIDI

    A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display

    26 parts90CC-BY-SA-4.0
  • 6 layers203 × 151.8 mmPDNode Baseboard, the printed circuit board in 3D

    PDNode Baseboard

    DvidMakesThings/HW_PDNode-600-Pro

    The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.

    236 parts86AGPL-3.0
  • 4 layers60 × 127 mmOpenHT RF, the printed circuit board in 3D

    OpenHT RF

    M17-Project/OpenHT-hw

    Repository for the hardware parts of the OpenHT project

    199 parts63
  • 2 layers85 × 56.5 mmModemHAT, the printed circuit board in 3D

    ModemHAT

    astuder/ModemHAT

    Classic Phone Modem HAT for the Raspberry Pi

    111 parts56
  • 4 layers70 × 60 mmMarelleo, the printed circuit board in 3D

    Marelleo

    Zebra-Rodeo/marelleo

    Une boîte qui raconte une histoire quand on pose une figurine dessus. Boîtier, carte, micrologiciel et doc pour la refaire.

    57 parts47
  • 2 layers285.8 × 124.6 mmPunk75, the printed circuit board in 3D

    Punk75

    dsanchezseco/punk75

    Ortholinear keyboard with 75 keys and all components through hole

    194 parts44GPL-3.0

Questions

How big is the Riego PCB?

It measures 68.6 × 63.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Riego use?

29 parts, built around the M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Riego KiCad files?

From the paulino/irrigation32 repository on GitHub, at the commit this page was made from: the board is pcb/riego.kicad_pcb and its schematic pcb/riego.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Riego design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).