
TDR 5351 core
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.

ad8307 swr-meter for esp32
Swr1 is an open-source printed circuit board by paulh002, from the paulh002/swr-meter repository on GitHub. It is a 2-layer board of 58.4 × 55.3 mm with 39 parts on 23 nets, routed with 118 tracks and 209 vias.
It is built around the AD8307AN and AMS1117-3.3. Its parts include 10 resistors, 9 capacitors, 4 connectors and 3 ICs. It belongs with the ESP32 boards of this library.
Kicad files
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Connector_Wire:SolderWirePad_1x01_Drill0.8mm | , , , , , , , , | |
| 7 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3, C4, C5, C7, C8 |
| 4 | MountingHole:MountingHole_3.2mm_M3 | , , , | |
| 4 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5, R6 |
| 2 | 127 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
| 2 | 24 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10 |
| 2 | AD8307 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | 100n | Capacitor_THT:C_Disc_D9.0mm_W5.0mm_P5.00mm | C9 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C6 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 22k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Ant | Connector_Coaxial:SMA_Amphenol_132134_Vertical | J3 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | Probe | Connector_Coaxial:SMA_Amphenol_132134_Vertical | J2 |
| 1 | TX | Connector_Coaxial:SMA_Amphenol_132134_Vertical | J1 |

MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.

MR-DOS/generator_5351_rect_sine
Rectangular and sine generator with Si5351 working up to 200 MHz

sh123/nano_power_meter
Dual channel Arduino Nano milliwatt power meter for HF/VHF/UHF/SHF bands


paretech/Watson
PCB layout and test results for a simple high dynamic range power meter based on the Analog Devices AD8307 Logarithmic Amplifier.

SmittyHalibut/HF-QRP-ServiceMonitor
A set of testing gear for your HF QRP radios.


It measures 58.4 × 55.3 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the AD8307AN and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the paulh002/swr-meter repository on GitHub, at the commit this page was made from: the board is kicad/swr1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask paulh002 before reusing the design.