2 layers113.5 × 35 mm
2 layers113.5 × 35 mm
Panthera stm32
passinglink/pcb4PCB designs for use with Passing Link
- Size
- 113.5 × 35 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 47
- Nets
- 93
- Pads
- 243
- Tracks, vias
- 488, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Feb 2020
- Updated
- 15 Mar 2021
Overview
Panthera stm32 is an open-source printed circuit board by passinglink, from the passinglink/pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 113.5 × 35 mm with 47 parts on 93 nets, routed with 488 tracks and 61 vias.
It is built around the MIC5219-3.3YM5, PESD5V0L1BA,115-ES and FM-B2020RGBA-HG, with the PESD12VL1BA,115-ES among its other parts. Its parts include 13 capacitors, 12 connectors, 9 resistors, 4 diodes and 2 ICs. It belongs with the STM32 boards of this library.
Main components
4
MIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorised
PESD5V0L1BA,115-ES
SOD-323-40℃~+125℃ 1 12A 13V 1uA 400W@8/20us 5V 6.5V 60pF Bidirectional IEC 61000-4-2 TVS SOD-323 ESD and Surge Protection (TVS/ESD) ROHSElecSuperESD And Surge Protection (TVS/ESD)
FM-B2020RGBA-HG
SMD,2.1x2.1mm-30℃~+85℃ 110° 1mm 2.1mm 2.1mm B:460nm~480nm、R:615nm~630nm、G:515nm~540nm Common Anode R:1.6V~2.4V、G:2.4V~3.2V、B:2.4V~3.2V R:20mA、G:20mA、B:20mA R:30mcd~110mcd、G:90mcd~270mcd、B:12mcd~40mcd R:48mW、G:64mW、B:64mW SMD,2.1x2.1mm RGB LEDs ROHSFoshan NationStar OptoelectronicsRGB LEDsPESD12VL1BA,115-ES
SOD-323-40℃~+125℃ 1 12V 13.3V 1uA 20pF 26V 400W@8/20us 7A@8/20us Bidirectional IEC 61000-4-2 TVS SOD-323 ESD and Surge Protection (TVS/ESD) ROHSElecSuperESD And Surge Protection (TVS/ESD)
README
legacy/panthera_e73/README.mdRazer Panthera PCB (E73-2G4M08S1C)
Drop in replacement for the Razer Panthera's PCB, with on-board Tag-Connect connector, and USB-C connector (use 0.8mm thickness if you want to use this).
TODO in next revision
- Sound output IC?
- Define a protocol to identify specific boards for GPIO mapping
BOM
| Part type | Part number | Quantity | Cost per individual item |
|---|---|---|---|
| MCU Module | E73-2G4M08S1C | 1 | $4.39 |
| LDO | MIC5219-3.3YM5 | 1 | $0.10 |
| Diode | PESD12VL1BA,115 | 1 | $0.05 |
| Diode | PESD5V0L1BA,115 | 2 | $0.04 |
| Pin header | Generic 0.1" 2x10 male | 2 | $0.05 |
| Pin header | Generic 0.1" 1x4 male | 1 | $0.02 |
| Connector | JST B5B-XH-AM | 3 | $0.10 |
| Connector | JST B4B-XH-AM | 1 | $0.08 |
| Connector | JST B3B-XH-AM | 2 | $0.07 |
| Resistor | 0603 10kΩ | 1 | ~$0 |
| Resistor | 0603 5.1kΩ | 2 | ~$0 |
| Resistor | 0603 100kΩ | 1 | ~$0 |
Notes
- R1 is unnecessary, unless you want to probe the touchpad's interrupt pin with a logic analyzer
- R2 and R3 are needed only if you're using the USB-C connector
- D1-3 are unnecessary, but recommended to protect from static discharge
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10, C11, C12 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 5 | Net-Tie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2, NT3, NT4, NT5 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 15 | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8, J9 |
| 2 | Conn_01x05 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J4, J5 |
| 2 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J6, J7 |
| 2 | PESD5V0L1BA,115 | Diode_SMD:D_SOD-323 | D2, D3 |
| 1 | 1.5K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 65 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J11 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J12 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05_Female | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical | J10 |
| 1 | Conn_02x05_Odd_Even | Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J3 |
| 1 | Crystal_GND2_Small | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | FM-B2020RGBA-HG | fm-b2020rgba-hg:FM-B2020RGBA-HG | D4 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PCB-USB-C | PCB-USB-C:PCB-USB-C | X1 |
| 1 | PESD12VL1BA,115 | Diode_SMD:D_SOD-323 | D1 |
| 1 | STM32F103RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
More from passinglink/pcb
1Similar boards
- 2 layers30 × 30 mm
- 4 layers146 × 95 mm
- 2 layers20 × 109 mm
- 4 layers138 × 114 mm
- 2 layers90.1 × 30 mm
- 2 layers31.5 × 46.3 mm
Airspeed SensorBoard
pms67/Airspeed_SensorBoard
Differential pressure sensor breakout board with STM32 (I2C-to-SPI) interface.
43 parts17MIT - 2 layers52 × 18.5 mm
- 4 layers164 × 164 mm
Midi controller
petitechose-midi-studio/hardware
Open-source hardware design files for the MIDI Studio controller.
138 parts1
Questions
How big is the Panthera stm32 PCB?
It measures 113.5 × 35 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Panthera stm32 use?
47 parts, built around the MIC5219-3.3YM5, PESD5V0L1BA,115-ES, FM-B2020RGBA-HG and PESD12VL1BA,115-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panthera stm32 KiCad files?
From the passinglink/pcb repository on GitHub, at the commit this page was made from: the board is legacy/panthera_stm32/panthera_stm32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panthera stm32 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).