
BajaLights
parecek/Baja5BLights
Lights and IR transponder for rc car Baja 5B. Front, rear lights including brake. Schematic, pcb (Kicad), Arduino sw

Lights and IR transponder for rc car Baja 5B. Front, rear lights including brake. Schematic, pcb (Kicad), Arduino sw
BajaController is an open-source printed circuit board by parecek, from the parecek/Baja5BLights repository on GitHub, published under the MIT licence. It is a 2-layer board of 57.9 × 44.9 mm with 28 parts on 48 nets, routed with 301 tracks and 0 vias.
It is built around the ATMEGA328-PU, LM555N and LT1086CT#PBF, with the ULN2003A among its other parts. Its parts include 8 capacitors, 7 resistors, 5 connectors, 4 ICs and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Lights and IR transponder for rc car Baja 5B. Front, rear lights including brake. Schematic, pcb (Kicad), Arduino sw
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 104 | Discret:C2 | C5, C7, C8 |
| 2 | 10R | Resistors_SMD:R_1206_HandSoldering | R5, R11 |
| 2 | 10u | Discret:C1V5 | C1, C2 |
| 2 | 22p | Capacitors_SMD:C_1206_HandSoldering | C3, C4 |
| 2 | BS107_DGS | Discret:TO92DGS | Q1, Q2 |
| 1 | 102 | Discret:C2 | C6 |
| 1 | 10K | Resistors_SMD:R_1206_HandSoldering | R4 |
| 1 | 12Mhz | Crystals:Crystal_HC49-U_Vertical | X1 |
| 1 | 18K | Resistors_SMD:R_1206_HandSoldering | R9 |
| 1 | 1K | Parek modules:Trimmer_CA6V5 | Trimmer1 |
| 1 | 1K5 | Resistors_SMD:R_1206_HandSoldering | R7 |
| 1 | 220R | Resistors_SMD:R_1206_HandSoldering | R8 |
| 1 | 270R | Resistors_SMD:R_1206_HandSoldering | R3 |
| 1 | ATMEGA328-P | Sockets_DIP:DIP-28__300_ELL | IC1 |
| 1 | AUX1 | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
| 1 | BackLight | Pin_Headers:Pin_Header_Straight_1x02 | P5 |
| 1 | Front1 | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
| 1 | Front2 | Pin_Headers:Pin_Header_Straight_1x04 | P4 |
| 1 | LM555N | Sockets_DIP:DIP-8__300_ELL | U2 |
| 1 | LT1086CT | Power_Integrations:TO-220 | U1 |
| 1 | Throttle | Pin_Headers:Pin_Header_Straight_2x03 | P1 |
| 1 | ULN2003A | Sockets_DIP:DIP-16__300_ELL | U3 |

parecek/Baja5BLights
Lights and IR transponder for rc car Baja 5B. Front, rear lights including brake. Schematic, pcb (Kicad), Arduino sw

parecek/Baja5BLights
Lights and IR transponder for rc car Baja 5B. Front, rear lights including brake. Schematic, pcb (Kicad), Arduino sw

hyperlode/luciebox
The Luciebox was originally meant as a gift for my niece Lucie. It started as a weekend project but evolved into a monster with 22 apps and games. For babies, kids and adults to explore and have fun with.

valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas

acolomitchi/cap-soil-moisture-v2
Files for the capacitive soil moisture (2 kicad projects and 1 arduino sketch with dependencies)

matiasmicheletto/openscad-oil-pumpjack
3d models and electronics for a variable speed scale pumpjack

RichCini/VIC-20-Reloaded
Reimaging of the original VIC-20cr ("cost-reduced") main board in a smaller footprint.



It measures 57.9 × 44.9 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the ATMEGA328-PU, LM555N, LT1086CT#PBF and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the parecek/Baja5BLights repository on GitHub, at the commit this page was made from: the board is kicad/BajaController/bajaController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).