

Mesh Injection Apparatus v1 015
MIA - Meshtastic Injection Apparatus Tool for long range Pen testing
- Size
- 46.5 × 67 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 45
- Pads
- 123
- Tracks, vias
- 162, 52
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Mar 2026
- Updated
- 16 Aug 2026
Overview
Mesh Injection Apparatus v1 015 is an open-source printed circuit board by paperclipsvinny, from the paperclipsvinny/Meshtastic-Injection-Apparatus repository on GitHub, published under the MIT licence. It is a 2-layer board of 46.5 × 67 mm with 13 parts on 45 nets, routed with 162 tracks and 52 vias.
It is built around the E22-900M30S, ESP32-S3-WROOM-1-N8 and AMS1117-3.3. Its parts include 6 capacitors, 3 ICs, 2 connectors and 1 resistor. It belongs with the ESP32 boards of this library.
Main components
3E22-900M30S
SMD,38.5x24mm-151dBm 12km 14mA 2.5V~5.5V 31dBm 650mA Continuous frequency coverage IPEX interface LoRa SPI SMD,38.5x24mm LoRa Modules ROHSChengdu Ebyte Elec TechLoRa ModulesESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMesh Injection Apparatus (M.I.A.)
A tool that combines HID injection with LoRa (Meshtastic) mesh networking for a red team implant that doesn't rely on WiFi or internet for C2.

DISCLAIMER:
This is a covert keystroke injection tool, designed for Red Teams, Penetration Testers, and authorized testing only. Do NOT use this tool on any systems which you have not been given express, explicit permission. I, the author, am not responsible for any damages which may incur from using this tool.
Where is everything?
For Firmware Architecture notes, check out ARCHITECTURE.md.
Hardware, Schematics and PCB manufacturing files can be found under /Hardware .
For technical Documentation, head over to DOCUMENTATION.md, also available at TheMIA.dev
As debuted at the DEF CON 34 Main stage
LICENSE:
This project is released under the MIT license. Anyone is permitted to modify, distribute, and use anything from this project for both private and commercial use.
Conditions:
You must provide a copy of the original copyright notice and include the full MIT license text, found in LICENSE.txt.
Limitations:
The software is NOT under any warranty, and the author will not be held responsible for any damages or issues arising from this software. The original Author’s name and original logos cannot be used for marketing or promotion.
Credits & Inspiration
- Meshtastic — the mesh protocol MIA builds on
- RadioLib — LoRa radio abstraction
- Loki — Meshtastic fork that added HID support, the direct inspiration for MIA's development.
- EvilCrowRF — web dashboard design inspiration.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C6 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10μF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 22μF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J3 |
| 1 | E22-900M30S | E22-900M30S:XCVR_E22-900M30S | U2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | Micro SD Card Det Hirose DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J1 |
The 12 most common of 13 parts.
Similar boards
- 6 layers144.8 × 106.7 mm

- 4 layers102.6 × 148 mm

- 4 layers200 × 100 mm

- 2 layers55 × 80 mm

Board esp32 v2
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
101 parts1.1k - 2 layers40 × 40 mm

Ikoka nano meshtastic device
ndoo/ikoka-nano-meshtastic-device
A Meshtastic device based on the Seeed Studio XIAO nRF52840 and EBYTE E22-XXXMXXS series LoRa modules. Pinout matches the Meshtastic xiaoble variant.
22 parts104CERN-OHL-P-2.0 - 2 layers31.1 × 94.2 mm

- 4 layers101.5 × 43.6 mm

Alcantara v.1.0
zenitheesc/Alcantara
Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.
90 parts5 - 6 layers84.5 × 56 mm

VLF4 PCB
McMaster-Rocketry-Team/VLF4r2
PCB schematics and layout for Void Lake Fusion 4 Avionics
156 parts3
Questions
How big is the Mesh Injection Apparatus v1 015 PCB?
It measures 46.5 × 67 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mesh Injection Apparatus v1 015 use?
13 parts, built around the E22-900M30S, ESP32-S3-WROOM-1-N8 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mesh Injection Apparatus v1 015 KiCad files?
From the paperclipsvinny/Meshtastic-Injection-Apparatus repository on GitHub, at the commit this page was made from: the board is hardware/pcb/experimental/mia-v1-015/Mesh_Injection_Apparatus_v1_015.kicad_pcb and its schematic hardware/pcb/experimental/mia-v1-014/Mesh_Injection_Apparatus_v1_014.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mesh Injection Apparatus v1 015 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).