4 layers152.8 × 66.3 mm
Hydrophone adc
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
200 parts
4 layers90.9 × 60.5 mm
Hydrophone adc
palouse-robosub/pcbs-2018This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
- Size
- 90.9 × 60.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 224
- Nets
- 249
- Pads
- 770
- Tracks, vias
- 3,604, 269
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Oct 2016
- Updated
- 26 Sep 2018
Overview
Hydrophone adc is an open-source printed circuit board by palouse-robosub, from the palouse-robosub/pcbs-2018 repository on GitHub. It is a 4-layer board of 90.9 × 60.5 mm with 224 parts on 249 nets, routed with 3,604 tracks and 269 vias.
It is built around the LM324, EL5170IS and LM2776DBV. Its parts include 67 resistors, 41 connectors, 35 capacitors, 20 diodes and 15 ICs.
Main components
3
LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
EL5170IS
SOIC-8-40℃~+85℃ 1100V/us 6mV 6uA 7.4mA 80mA 84dB Differential Enable/shutdown function、Single-ended to differential conversion、Capacitive load driving、Adjustable output common-mode voltage、Current limiting / short-circuit protection Single-channel SOIC-8 Differential AmplifiersELANTECDifferential Amplifiers
LM2776DBV
SOT-23-6-40℃~+85℃ -5.5V~-2.7V 2.5Ω 2.7V~5.5V 200mA 200uA 2MHz 90% Inverted Support SOT-23-6 Charge Pumps ROHSTexas InstrumentsCharge Pumps
Parts
224| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 0 | Resistors_SMD:R_0603 | R1002, R1004, R1005, R1006, R1008, R1009, R1010, R1012, R1013, R1202, R1204, R1205, R1206, R1208, R1209, R1210 +22 |
| 36 | TEST_1P | Measurement_Points:Measurement_Point_Round-TH_Small | J1001, J1002, J1003, J1004, J1005, J1006, J1007, J1101, J1102, J1201, J1202, J1203, J1204, J1205, J1206, J1207 +20 |
| 26 | TEST | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP301, TP302, TP303, TP304, TP305, TP306, TP307, TP308, TP309, TP310, TP311, TP312, TP313, TP314, TP315, TP316 +10 |
| 16 | D_Schottky | Diodes_SMD:D_SOD-323 | D501, D502, D503, D504, D701, D702, D703, D704, D901, D902, D903, D904, D1101, D1102, D1103, D1104 |
| 13 | 10k | Resistors_SMD:R_0603 | R601, R603, R607, R801, R803, R807, R1001, R1003, R1007, R1201, R1203, R1207, R1303 |
| 9 | 100n | Capacitors_SMD:C_0603 | C402, C403, C404, C405, C406, C407, C409, C410, C411 |
| 8 | 100 | Resistors_SMD:R_0603 | R505, R506, R705, R706, R905, R906, R1105, R1106 |
| 8 | 1n | Capacitors_SMD:C_0603 | C601, C602, C801, C802, C1001, C1002, C1201, C1202 |
| 8 | POT | robosub_footprints:TC33X-2 | RV601, RV602, RV801, RV802, RV1001, RV1002, RV1201, RV1202 |
| 5 | Ferrite_Bead | Resistors_SMD:R_0603 | L401, L402, L403, L404, L405 |
| 4 | 10n | Capacitors_SMD:C_0603 | C501, C701, C901, C1101 |
| 4 | 10u | Capacitors_SMD:C_0805 | C1203, C1205, C1206, C1302 |
| 4 | 1u | Capacitors_SMD:C_0603 | C401, C412, C1204, C1304 |
| 4 | 3.16k | Resistors_SMD:R_0603 | R611, R811, R1011, R1211 |
| 4 | CONN_COAXIAL | robosub_footprints:BNC-Coax-TE | J401, J402, J403, J404 |
| 4 | LM324 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U601, U801, U1001, U1201 |
| 4 | el5170 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U501, U701, U901, U1101 |
| 3 | 2.2u | Capacitors_SMD:C_0603 | C408, C1303, C1305 |
| 2 | 1k | Resistors_SMD:R_0603 | R1214, R1215 |
| 2 | 22u | Capacitors_SMD:C_0603 | C1308, C1309 |
| 2 | 4.7u | robosub_footprints:Inductor-3.6mm-Pitch-4.0mm-Length-1.5mm-Width | L1201, L1301 |
| 2 | GRN | LEDs:LED_0805 | D1203, D1204 |
| 1 | 22n | Capacitors_SMD:C_0603 | C1307 |
| 1 | 2k | Resistors_SMD:R_0603 | R401 |
| 1 | 500 | Resistors_SMD:R_0603 | R1216 |
| 1 | BARREL_JACK | robosub_footprints:BarrelJack-CUI | J1301 |
| 1 | LM2776 | TO_SOT_Packages_SMD:SOT-23-6 | U1302 |
| 1 | LOGO | robosub_footprints:robosub_logo-medium | G*** |
| 1 | LTC2171-14 | Housings_DFN_QFN:QFN-52-1EP_7x8mm_Pitch0.5mm | U401 |
| 1 | RED | LEDs:LED_0805 | D1202 |
| 1 | TS30013 | Housings_DFN_QFN:QFN-16-1EP_3x3mm_Pitch0.5mm_ThermalVias | U1301 |
| 1 | XC9261 | robosub_footprints:UFDFN-6 | U1202 |
| 1 | YLW | LEDs:LED_0805 | D1201 |
| 1 | micro-zed-jx1 | robosub_footprints:fci-61083-2x50 | U201 |
| 1 | micro-zed-jx2 | robosub_footprints:fci-61083-2x50 | U301 |
| 1 | xc6222 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U1203 |
The 220 most common of 224 parts.
More from palouse-robosub/pcbs-2018
12- 2 layers105.8 × 10.4 mm
Pneumatics
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
58 parts - 2 layers43.2 × 35.6 mm
Interface converter
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
56 parts - 2 layers38.7 × 31.2 mm
Interface converter
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
50 parts - 2 layers35.6 × 73.7 mm
Maestro adapter
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
49 parts - 2 layers38.7 × 31.2 mm
Interface converter
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
48 parts - 2 layers34.2 × 72.9 mm
Maestro adapter
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
48 parts - 2 layers66.5 × 44.4 mm
DepthSensorBoard
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
47 parts - 2 layers55.9 × 40 mm
DepthSensorBoard
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
34 parts - 2 layers58.4 × 45.7 mm
Led controller
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
34 parts - 2 layers116.8 × 15.2 mm
Reed switch mount
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
28 parts - 2 layers46.5 × 31.2 mm
Led controller
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
26 parts
Similar boards
- 2 layers60 × 80 mm
- 4 layers37 × 34.3 mm
Readout 60pin
opentac/opentac
OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.
55 parts92MIT - 2 layers53 × 42.5 mm
- 4 layers120 × 135 mm
- 6 layers19.4 × 36.3 mm
- 2 layers50 × 50 mm
LAB3
lengoctuong2005/KiCad-PCB-Labs
Tập hợp toàn bộ các bài thực hành và đồ án thiết kế PCB (KiCad) trong khóa học Thiết kế Mạch In / Vi Mạch.
38 parts1 - 2 layers71 × 46.4 mm
- 4 layers230 × 152 mm
SENTINEL TRM
ajisrawi/sentinel-uhf-radar
Reference design of a two-face UHF early-warning phased-array radar: system sizing, MoM antenna simulation, seven KiCad PCB projects, Blender site model
144 parts
Questions
How big is the Hydrophone adc PCB?
It measures 90.9 × 60.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hydrophone adc use?
224 parts, built around the LM324, EL5170IS and LM2776DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hydrophone adc KiCad files?
From the palouse-robosub/pcbs-2018 repository on GitHub, at the commit this page was made from: the board is hydrophone-adc/revB/hydrophone-adc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hydrophone adc design in my own project?
Its repository states no licence, so its author keeps all rights: ask palouse-robosub before reusing the design.