

- Size
- 60 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 122
- Nets
- 149
- Pads
- 589
- Tracks, vias
- 1,032, 251
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Jan 2025
- Updated
- 19 Mar 2025
Overview
EEG is an open-source printed circuit board by Raigetix, from the Raigetix/EEG_EMT_32 repository on GitHub. It is a 2-layer board of 60 × 80 mm with 122 parts on 149 nets, routed with 1,032 tracks and 251 vias.
It is built around the ESP32-S3-WROOM-1-N8, LM324 and AD7771BCPZ, with the TPD4E001DRLR, LM2776DBV and BC807 among its other parts. Its parts include 39 capacitors, 29 resistors, 16 transistors, 13 ICs and 13 connectors. It belongs with the ESP32 boards of this library.
Main components
9ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierAD7771BCPZ
LFCSP-64(9x9)-40℃~+125℃ 107dB 10ppm/℃ 128kHz 128kHz 24 312.5mV、625mV、1.25V、2.5V 3V~3.6V 8 8.192MHz Built-in SPI Sigma-Delta Support Yes LFCSP-64(9x9) Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADCs)TPD4E001DRLR
SOT-563-40℃~+85℃ 1.5pF 100W@8/20us 11V 17V 1nA 5.5A@8/20us 5.5V ESD Four channels IEC 61000-4-2 Unidirectional SOT-563 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)LM2776DBV
SOT-23-6-40℃~+85℃ -5.5V~-2.7V 2.5Ω 2.7V~5.5V 200mA 200uA 2MHz 90% Inverted Support SOT-23-6 Charge Pumps ROHSTexas InstrumentsCharge PumpsBC807
SOT-23-65℃~+150℃ 1 PNP 100 100nA 345mW 45V 500mA 5V 700mV 80MHz PNP SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesWPN4020H4R7MT
SMD,4x4mm108mΩ 2.85A 4.7uH 4.9A ±20% SMD,4x4mm Power Inductors ROHSSunlordPower Inductors
README
README.mdEEG_EMT_32
Parts
122| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R6, R15, R16, R17, R18, R23, R24, R25, R26, R28, R29, R30 |
| 12 | 47uf | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C21, C22, C24, C25, C28, C29, C30, C31, C35, C36, C37, C38 |
| 8 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C6, C8, C10, C12, C14, C16 |
| 8 | 1K5 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12, R13, R14, R19, R20, R21, R22 |
| 8 | BC807 | Package_TO_SOT_SMD:SOT-23 | Q2, Q4, Q6, Q8, Q10, Q12, Q14, Q16 |
| 8 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q5, Q7, Q9, Q11, Q13, Q15 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C9, C11, C13, C15, C17 |
| 5 | 100nf | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | C20, C23, C26, C32, C33 |
| 4 | 2.2K | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2, RN3, RN4 |
| 4 | TPD4E001DRLR | Package_TO_SOT_SMD:Texas_R-PDSO-N6_DRL-6 | U2, U3, U4, U5 |
| 3 | 1nF | Resistor_SMD:R_Array_Concave_4x0603 | CN2, CN3, CN4 |
| 3 | Conn_01x02_Socket | Connector_JST:JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical | J7, J8, J9 |
| 2 | 16pf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C18, C19 |
| 2 | 1k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R10 |
| 2 | 1uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C7 |
| 2 | 390 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R33, R34 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | Rcc1, Rcc2 |
| 2 | LM324 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U10, U11 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 1 | 100nf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 1nF | Resistor_SMD:R_Array_Convex_4x0603 | CN1 |
| 1 | 1uf | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | C34 |
| 1 | 1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C39 |
| 1 | 22pf | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | C27 |
| 1 | 33.2K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | AD7771BCPZ | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP7.35x7.35mm | IC1 |
| 1 | Conn_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J5 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm | Y1 |
| 1 | DAC5578xPW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U12 |
| 1 | DE15_Plug_HighDensity_MountingHoles | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J1 |
| 1 | DE9_Plug_MountingHoles | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J3 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | LM2776 | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | LM317L_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | LM337L_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | LOGO | LOGO | G*** |
| 1 | SS14 | Diode_SMD:D_SMA | D1 |
| 1 | TPS563200 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J2 |
| 1 | WPN4020H4R7MT | Inductor_SMD:L_Vishay_IFSC-1515AH_4x4x1.8mm | L1 |
Similar boards
- 4 layers63.2 × 70.5 mm

- 4 layers57.2 × 179.7 mm

Optical
gustebeast/public-steel-guitar
A pedal steel guitar you can build yourself, from parts anyone can buy.
287 partsCERN-OHL-S-2.0 - 2 layers99.5 × 99.5 mm

Balancer
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
173 parts3MIT - 2 layers59.5 × 27.2 mm

- 2 layers30.4 × 52.6 mm

MBus ESP Adapter
tomasmcguinness/matter-esp32-mbus-adapter
An ESP32-C6 adapter board for wired M-Bus (EN 13757) meters, with firmware examples that expose meter readings to a Matter fabric over Thread.
42 parts2 - 2 layers52.9 × 28.2 mm

- 2 layers55 × 100 mm

- 4 layers90.9 × 60.5 mm

Hydrophone adc
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
224 parts
Questions
How big is the EEG PCB?
It measures 60 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EEG use?
122 parts, built around the ESP32-S3-WROOM-1-N8, LM324, AD7771BCPZ and TPD4E001DRLR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EEG KiCad files?
From the Raigetix/EEG_EMT_32 repository on GitHub, at the commit this page was made from: the board is Hardware/EEG/EEG.kicad_pcb and its schematic Hardware/EEG/ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EEG design in my own project?
Its repository states no licence, so its author keeps all rights: ask Raigetix before reusing the design.