Skip to the content
12345678

EL5170IS

ELANTECExtended

-40℃~+85℃ 1100V/us 6mV 6uA 7.4mA 80mA 84dB Differential Enable/shutdown function、Single-ended to differential conversion、Capacitive load driving、Adjustable output common-mode voltage、Current limiting / short-circuit protection Single-channel SOIC-8 Differential Amplifiers

Part id
elantec/EL5170IS
Category
Differential Amplifiers
Package
SOIC-8
Pins
5
In stock
0 at JLCPCB (C4370905)
Used on
2 open-source boards

Overview

The EL5170IS is a differential Amplifier made by ELANTEC in a SOIC-8 package with 8 pins. -40℃~+85℃ 1100V/us 6mV 6uA 7.4mA 80mA 84dB Differential Enable/shutdown function、Single-ended to differential conversion、Capacitive load driving、Adjustable output common-mode voltage、Current limiting / short-circuit protection Single-channel SOIC-8 Differential Amplifiers.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:EL5170IS, from EasyEDA) and its footprint (Package_SO:SO-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C4370905). 2 open-source boards in 1 repository on GitHub use it.

Symbol

8OUT+1IN+3IN-
EasyEDA_Cloud:EL5170ISFrom EasyEDA

Footprint

12345678
Package_SO:SO-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the EL5170IS
PinNameType
1IN+Unspecified
2EN#Unspecified
3IN-Unspecified
4REFUnspecified
5OUT-Unspecified
6VS+Unspecified
7VS-Unspecified
8OUT+Output

Open-source boards using it

2
  • 4 layers90.9 × 60.5 mmHydrophone adc, the printed circuit board in 3D

    Hydrophone adc

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    224 parts
  • 4 layers152.8 × 66.3 mmHydrophone adc, the printed circuit board in 3D

    Hydrophone adc

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    200 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the EL5170IS?

Yes. The symbol is EasyEDA_Cloud:EL5170IS and the footprint Package_SO:SO-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the EL5170IS?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the EL5170IS datasheet?

ELANTEC publishes it: the Datasheet link on this page opens it.

Where can I order the EL5170IS?

JLCPCB lists it as part C4370905, with 0 in stock; the sellers' links on this page open their listings.

What can replace the EL5170IS?

Parts like it in the library: the CM4321-SOPTA by CIMO, the THS4140ID by Texas Instruments, the THS6062ID by Texas Instruments and the AD626ARZ-REEL by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the EL5170IS?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.