2 layers216.9 × 86.8 mm
Sweepbling lp pcb
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
59 parts2.1k
2 layers147 × 64 mm
Esp32 controller v2
pacman314159/esp32_controller_v2- Size
- 147 × 64 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 54
- Pads
- 199
- Tracks, vias
- 441, 69
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Feb 2025
- Updated
- 7 Feb 2025
Overview
Esp32 controller v2 is an open-source printed circuit board by pacman314159, from the pacman314159/esp32_controller_v2 repository on GitHub. It is a 2-layer board of 147 × 64 mm with 59 parts on 54 nets, routed with 441 tracks and 69 vias.
Its parts include 13 connectors, 10 resistors, 10 ICs, 6 capacitors and 6 switches. It belongs with the ESP32 and ESP8266 boards of this library.
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | ~ | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | U1, U2, U3, U6, U7, U8, U9, U10 |
| 6 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C7 |
| 6 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7, J10, J11, J12, J13 |
| 4 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R7, R8 |
| 4 | 120R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6 |
| 4 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4 |
| 4 | M3 Hole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 4 | SW_Push | MX_Socket:MX_Socket | SW1, SW2, SW4, SW5 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J8, J9 |
| 3 | ~ | YH_2p00:4p_male_horizontal_smd | J3, J4, J5 |
| 2 | 2N2222 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 2 | 4K7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW3, SW6 |
| 1 | 1N4001 | Diode_SMD:D_SOD-123 | D5 |
| 1 | Battery_Cell | Battery:BatteryHolder_MPD_BH-18650-PC2 | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Vibration Motor | Coin_Vibration_Motor:XDCR_C0720B001F | M1 |
| 1 | wemos_d1 | wemos_d1:wemos_d1 | U5 |
| 1 | ~ | YH_2p00:2p_male_horizontal_smd | J2 |
| 1 | ~ | IP5306_Power_Bank:IP5306_Module_USB_TypeC | U4 |
Questions
How big is the Esp32 controller v2 PCB?
It measures 147 × 64 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32 controller v2 use?
59 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 controller v2 KiCad files?
From the pacman314159/esp32_controller_v2 repository on GitHub, at the commit this page was made from: the board is esp32_controller_v2.kicad_pcb and its schematic esp32_controller_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 controller v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask pacman314159 before reusing the design.
Similar boards
- 2 layers132.3 × 94.9 mm
- 2 layers100 × 24 mm
STM32 Klipper Expander
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
59 parts1.1kGPL-3.0 - 2 layers77.5 × 20.4 mm
- 2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers100 × 96 mm
Backlight
jackw01/scanlight
A better light source for scanning color negative film
59 parts397CERN-OHL-W-2.0 - 2 layers95.3 × 100 mm
Beyblock20
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
59 parts335GPL-3.0 - 2 layers94 × 94.5 mm
Vikropad
sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
59 parts220CERN-OHL-P-2.0