Skip to the content
4 layers99.7 × 103.5 mmGimletlet, the printed circuit board in 3D

More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab

Size
99.7 × 103.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
131
Nets
153
Pads
545
Tracks, vias
1,054, 203
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
28 Feb 2023
Updated
28 Feb 2023

Overview

Gimletlet is an open-source printed circuit board by oxidecomputer, from the oxidecomputer/hw-gimletlet repository on GitHub, published under the MPL-2.0 licence. It is a 4-layer board of 99.7 × 103.5 mm with 131 parts on 153 nets, routed with 1,054 tracks and 203 vias.

Its parts include 52 resistors, 20 capacitors, 17 connectors, 4 diodes and 2 ICs. It belongs with the STM32 boards of this library.

README

README.md

hw-gimletlet

More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards.

In active use for Hubris development and as a Swiss Army Knife around the lab. Generally when someone is speaking about a "gimletlet" the mean gimletlet2 "Glorified Gimletlet" as a vanishingly small number of gimletlet1's were built and used for some very early network bring-up.

gimletlet-2

Some design notes for gimletlet2 More design notes for gimletlet2

Some mechanical specs

Bonus boards

gimletlet-1

The OG gimletlet. Same CPU, nothing else is the same :)

very limited use, very limited quantity

Subfolder

gimletlet-1

management network bringup

very limited use, very limited quantity

Pairs with the gimletlet-1

mgmt-bringup

Parts

131
QtyValueFootprintReferences
3010kResistor_SMD:R_0603_1608MetricR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +14
1622Resistor_SMD:R_0603_1608MetricR31, R32, R33, R34, R35, R36, R37, R39, R40, R41, R42, R43, R44, R45, R46, R47
130µ1Capacitor_SMD:C_0603_1608MetricC8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20
12TestPointTestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_BeadedTP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23
11TestPoint_SmallTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11
6Conn6x1pmod:PMOD_6pin_host_horizontalJ9, J10, J11, J12, J13, J14
468Resistor_SMD:R_0603_1608MetricR48, R49, R50, R51
4Conn6x2pmod:PMOD_12pin_host_horizontalJ2, J3, J4, J5
4LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4
4MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
2100kResistor_SMD:R_0603_1608MetricR4, R8
211pCapacitor_SMD:C_0603_1608MetricC3, C4
222µCapacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-DC1, C2
22µ2 100mRCapacitor_SMD:C_0603_1608MetricC5, C6
2Conn2x1Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1, JP2
2Conn3x2Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ7, J8
2MountingHoleMountingHole:MountingHole_3.2mm_M3H5, H6
14µ7Capacitor_SMD:C_0603_1608MetricC7
18MHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mmY1
1BarrelJackConnector_BarrelJack:BarrelJack_CUI_PJ-036AH-SMT_HorizontalJ1
1Buttonc-and-k-pts851:PTS815SW1
1Conn2x1Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_VerticalJP3
1Conn41x2hirose-df9:Hirose_DF9-41S-1V(69)_2Rows_41Pin-2MP_P1.0mm_VerticalJ6
1Conn9x1Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_VerticalJ16
1Conn_01x07Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ17
1LOLNOgrumpy:Oxide_Board_Identifier_33x7mmFID1
1OKI-78SR-3.3_1.5-W36-CConverter_DCDC:Converter_DCDC_muRata_OKI-78SR_VerticalU1
1PolyfuseFuse:Fuse_1812_4532MetricF1
1STM32H753ZITxPackage_QFP:LQFP-144_20x20mm_P0.5mmU2
1SWDConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ15

More from oxidecomputer/hw-gimletlet

2
  • 6 layers150 × 105 mmGimlet mgmt bringup, the printed circuit board in 3D

    Gimlet mgmt bringup

    oxidecomputer/hw-gimletlet

    More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab

    322 parts4MPL-2.0
  • 4 layers58 × 57 mmGimletlet, the printed circuit board in 3D

    Gimletlet

    oxidecomputer/hw-gimletlet

    More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab

    59 parts4MPL-2.0

Similar boards

  • 4 layers90.9 × 111.5 mmFujiNet StudioII Rev0, the printed circuit board in 3D

    FujiNet StudioII Rev0

    FujiNetWIFI/fujinet-hardware

    Schematics and design files for FujiNet hardware

    131 parts142
  • 4 layers26 × 35 mmHSLinkPro, the printed circuit board in 3D

    HSLinkPro

    cherry-embedded/HSLink-hardware

    A place to release hslink hardware

    131 parts44Apache-2.0
  • 4 layers54 × 50 mmReworkctf v2, the printed circuit board in 3D

    Reworkctf v2

    azonenberg/reworkctf

    This is a points-based challenge board intended for practicing of PCB rework and circuit editing skills. This is not a circuit debug challenge.

    131 parts34BSD-3-Clause
  • 4 layers72.9 × 61.3 mmGraphics card rev-2, the printed circuit board in 3D

    Graphics card rev-2

    ShaneTWilliams/worlds-worst-graphics-card

    Custom HDMI transmitter PCB with 480 MHz STM32H7 microcontroller

    131 parts18MIT
  • 4 layers54.6 × 86.3 mmA0, the printed circuit board in 3D

    A0

    absmach/a0

    A0 IoT Gateway

    131 parts16Apache-2.0
  • 4 layers406 × 215.5 mmFlexDeploySidePanels, the printed circuit board in 3D

    FlexDeploySidePanels

    stanford-ssi/samwise-avionics

    Avionics for 2U Rev of Sputnik Satellite

    131 parts13
  • 4 layers84.5 × 57.6 mmProtoSMDfootprintField, the printed circuit board in 3D

    ProtoSMDfootprintField

    Architeuthis-Flux/Barnacle_Board

    a breadboard you can stick things to

    131 parts11MIT
  • 4 layers44.9 × 47.2 mmThermalCam, the printed circuit board in 3D

    ThermalCam

    randomplum/autoliv_nv3_uvc

    Adapter for the Autoliv NV3 sensor providing USB video device class output

    131 parts9

Questions

How big is the Gimletlet PCB?

It measures 99.7 × 103.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Gimletlet use?

131 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gimletlet KiCad files?

From the oxidecomputer/hw-gimletlet repository on GitHub, at the commit this page was made from: the board is gimletlet.kicad_pcb and its schematic gimletlet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gimletlet design in my own project?

Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).