Skip to the content
4 layers44.9 × 47.2 mmThermalCam, the printed circuit board in 3D

Adapter for the Autoliv NV3 sensor providing USB video device class output

Size
44.9 × 47.2 mm
Copper layers
4
Thickness
1.6 mm
Parts
131
Nets
136
Pads
509
Tracks, vias
638, 352
Pours
9
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
10 Nov 2022
Updated
25 Sep 2023

Overview

ThermalCam is an open-source printed circuit board by randomplum, from the randomplum/autoliv_nv3_uvc repository on GitHub. It is a 4-layer board of 44.9 × 47.2 mm with 131 parts on 136 nets, routed with 638 tracks and 352 vias.

It is built around the CY7C68013A-56PVXC, MUN3CAD01-SC and CAT24C128LI-, with the USBLC6-2SC6, 2PIN and BSS138PW,115(ES) among its other parts. Its parts include 52 capacitors, 36 resistors, 13 diodes, 9 ICs and 4 connectors. It belongs with the FPGA and CPLD boards of this library.

Main components

7

Parts

131
QtyValueFootprintReferences
30100nCapacitor_SMD:C_0402_1005MetricC4, C10, C11, C12, C20, C22, C25, C26, C33, C34, C35, C36, C37, C38, C39, C40 +14
12GreenLED_SMD:LED_0402_1005MetricD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12
9470RResistor_SMD:R_0402_1005MetricR3, R10, R11, R12, R13, R14, R15, R16, R17
85k1Resistor_SMD:R_0402_1005MetricR4, R30, R31, R32, R33, R34, R35, R36
610kResistor_SMD:R_0402_1005MetricR1, R2, R5, R7, R8, R9
633uCapacitor_SMD:C_0805_2012MetricC13, C14, C15, C16, C17, C18
6FerriteBead_SmallInductor_SMD:L_0603_1608MetricFB1, FB2, FB3, FB4, FB5, FB6
422uCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C19
3100kResistor_SMD:R_0402_1005MetricR18, R20, R22
3100pCapacitor_SMD:C_0402_1005MetricC7, C8, C9
3MUN3CAD01-SCCustom:MUN3CAD01U2, U3, U4
210uCapacitor_SMD:C_0402_1005MetricC31, C32
210uCapacitor_SMD:C_0805_2012MetricC23, C27
212pFCapacitor_SMD:C_0402_1005MetricC29, C30
21uCapacitor_SMD:C_0805_2012MetricC24, C28
110KResistor_SMD:R_0402_1005MetricR26
110pCapacitor_SMD:C_0402_1005MetricC21
110uHInductor_SMD:L_1812_4532MetricL1
1110kResistor_SMD:R_0402_1005MetricR29
11kResistor_SMD:R_0402_1005MetricR27
122k1Resistor_SMD:R_0402_1005MetricR23
124MHzCrystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mmY1
12pinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
131k6Resistor_SMD:R_0402_1005MetricR19
133kResistor_SMD:R_0402_1005MetricR6
1499KResistor_SMD:R_0402_1005MetricR28
150kResistor_SMD:R_0402_1005MetricR21
175kResistor_SMD:R_0402_1005MetricR24
19k1Resistor_SMD:R_0402_1005MetricR25
1AP3012Package_TO_SOT_SMD:SOT-23-5U5
1ASE-25MHzOscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mmX1
1BSS138PW,115Package_TO_SOT_SMD:SOT-323_SC-70Q1
1CAT24C128Package_SO:TSSOP-8_4.4x3mm_P0.65mmU7
1CY7C68013A-56PVXPackage_SO:SSOP-56_7.5x18.5mm_P0.635mmU9
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ3
1Conn_02x20_Counter_ClockwiseCustom:52991-0408J1
1G***kibuzzard-636D7417kibuzzard-636D7417
1G***kibuzzard-636D7427kibuzzard-636D7427
1G***kibuzzard-636D765Ekibuzzard-636D765E
1G***kibuzzard-636D7435kibuzzard-636D7435
1G***kibuzzard-636D73F4kibuzzard-636D73F4
1GW1NR-9_QN882Custom:QFN-88_EP_10x10_Pitch0.4mmU1
1LT3042xMSEPackage_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mmU6
1PMEG2010EHDiode_SMD:D_SOD-123FD13
1SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabelsJP1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U8
1USB_C_ReceptacleConnector_USB:USB_C_Receptacle_JAE_DX07S024WJ3R400J4

Similar boards

  • 4 layers100 × 64 mmS6la8, the printed circuit board in 3D

    S6la8

    OutBlade/s6la8

    Open-source 8-channel logic analyzer: FX2LP + Spartan-6, with a sigrok driver. Design in progress, not yet built or tested.

    155 parts1
  • 6 layers40.6 × 40.5 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    desanv01/Flight-Controller-V2

    STM32H743 controller: regulated power, signal-only ESC, neutral ArduPilot firmware, manufacturing data and engineering history.

    169 partsCERN-OHL-S-2.0
  • 2 layers98 × 98 mmMaglock, the printed circuit board in 3D

    Maglock

    makerspacelt/maglock-hw

    MagLock is the entrance controller hardware. It features:

    221 parts
  • 2 layers58.2 × 38.1 mmUsb sniffer, the printed circuit board in 3D

    Usb sniffer

    ataradov/usb-sniffer

    Low-cost LS/FS/HS USB sniffer with Wireshark interface

    87 parts1.3kBSD-3-Clause
  • 4 layers100 × 100 mmSDR board, the printed circuit board in 3D

    SDR board

    BillyWoods/Narrowband-SDR

    A four-channel narrowband SDR receiver based around the Mirics MSi001, MAX11131 and FX2LP.

    467 parts16
  • 2 layers24.6 × 18.5 mmV0.1 TACS board, the printed circuit board in 3D

    V0.1 TACS board

    stairs1/stim-music

    Music meets Electrical Vestibular Stimulation

    44 parts6MIT
  • 4 layers66 × 61 mmBaseband, the printed circuit board in 3D

    Baseband

    wnmusic/simpleFE

    A very low cost mixed front end (ADC, DAC, SDR)

    145 parts5GPL-2.0
  • 2 layers17.8 × 43.2 mmStm32c0-nano, the printed circuit board in 3D

    Stm32c0-nano

    znuh/stm32c0-nano-hw

    STM32C0-Nano Board Hardware Design Files

    31 parts2CC-BY-SA-4.0

Questions

How big is the ThermalCam PCB?

It measures 44.9 × 47.2 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ThermalCam use?

131 parts, built around the CY7C68013A-56PVXC, MUN3CAD01-SC, CAT24C128LI- and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ThermalCam KiCad files?

From the randomplum/autoliv_nv3_uvc repository on GitHub, at the commit this page was made from: the board is hw/ThermalCam.kicad_pcb and its schematic hw/ThermalCam.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ThermalCam design in my own project?

Its repository states no licence, so its author keeps all rights: ask randomplum before reusing the design.