Skip to the content
2 layers19 × 15.2 mmMfo, the printed circuit board in 3D

Multi Frequency Oscillator kicad

Size
19 × 15.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
17
Pads
60
Tracks, vias
126, 9
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
16 May 2026
Updated
17 May 2026

Overview

Mfo is an open-source printed circuit board by owen-rp2a03, from the owen-rp2a03/mfo repository on GitHub. It is a 2-layer board of 19 × 15.2 mm with 21 parts on 17 nets, routed with 126 tracks and 9 vias.

It is built around the TLV75733PDBV and TPS78218DDC. Its parts include 7 connectors, 6 capacitors, 4 resistors, 3 ICs and 1 crystal.

Main components

2

README

README.md

mfo

Multi Frequency Oscillator with 5 or 3.3 volt supply

<img style="width:49%" src=images/board-top.png>

This design has not been tested yet. Though, the board should be functionally the same; refer to the following links.

original post about mfo

original oshpark page

Parts:

  • U1 1.8V LDO Regulator, here a TPS78218 (Mouser P/N: 595-TPS78218DDCT)
  • U2 Texas Instruments CDCE925 (Mouser P/N: 595-CDCE925PWR)
  • U3 3.3V LDO Regulator, here a TLV75733 (Mouser P/N: 595-TLV75733PDYDR)
  • C1 1uF 0603 SMD capacitor
  • C2 1uF 0603 SMD capacitor
  • C3 1uF 0603 SMD capacitor
  • C4 1uF 0603 SMD capacitor
  • C5 1uF 0603 SMD capacitor
  • C6 1uF 0603 SMD capacitor
  • R1 10K 0603 SMD resistor
  • R2 10K 0603 SMD resistor
  • R3 18R 0603 SMD resistor (or whatever needed to accomodate signal to the circuit)
  • R4 18R 0603 SMD resistor (or whatever needed to accomodate signal to the circuit)
  • Y1 27MHz crystal (Mouser P/N: 774-ATS270BSM-1E or the shallower 815-ABLS3-27MD4YFT)

Parts

21
QtyValueFootprintReferences
61uCapacitors_SMD:C_0603C1, C2, C3, C4, C5, C6
210kResistors_SMD:R_0603R1, R2
218Resistors_SMD:R_0603R3, R4
127MHzCrystals:Crystal_SMD_HC49-SDY1
13V3_INMeasurement_Points:Measurement_Point_Square-SMD-Pad_SmallJ3
15V_INMeasurement_Points:Measurement_Point_Square-SMD-Pad_SmallJ7
1CDCE925PWRHousings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mmU2
1CLK1Measurement_Points:Measurement_Point_Square-SMD-Pad_SmallJ5
1CLK2Measurement_Points:Measurement_Point_Square-SMD-Pad_SmallJ6
1Conn_01x04_PinPin_Headers:Pin_Header_Straight_1x04_Pitch2.00mmJ2
1GNDMeasurement_Points:Measurement_Point_Square-SMD-Pad_SmallJ4
1S0Measurement_Points:Measurement_Point_Square-SMD-Pad_SmallJ1
1TLV75733PDBVPackage_TO_SOT_SMD:SOT-23-5U3
1TPS78218DDCPackage_TO_SOT_SMD:SOT-23-5U1

Similar boards

  • 2 layers80 × 65 mmRandom sampler, the printed circuit board in 3D

    Random sampler

    Terrazed/random_sampler-kicad

    96 parts
  • 2 layers284.7 × 94.2 mmHE60, the printed circuit board in 3D

    HE60

    peppapighs/HE60

    60% Hall-effect keyboard

    332 parts118GPL-3.0
  • 4 layers58 × 50 mmBldc motor cntroller, the printed circuit board in 3D

    Bldc motor cntroller

    azmat-bilal/bldc_motor_controller_pcb

    A Brushless DC Motor controller board. The design is inspired and is compatible with Odrive project (https://github.com/madcowswe/ODriveHardware) except that this one has a single channel.

    146 parts112MIT
  • 4 layers56.5 × 65 mmTv070hat, the printed circuit board in 3D

    Tv070hat

    ScandentLLC/tv070wxm-hat

    Raspberry Pi 5 HAT for Steam Deck LCD

    54 parts108CC0-1.0
  • 2 layers27.9 × 92.7 mmESP32-S2-WROOM, the printed circuit board in 3D

    ESP32-S2-WROOM

    ccadic/ESP32-S2-DevBoardTFT

    Esp32-S2 dev board with 240x240 IPS display

    29 parts79
  • 4 layers20 × 30 mmNanoAmmeter v2, the printed circuit board in 3D

    NanoAmmeter v2

    joeltroughton/nanoAmmeter

    A small ammeter for measuring printed glucose biosensors

    35 parts29
  • 4 layers51.3 × 23.4 mm20210211 eduino, the printed circuit board in 3D

    20210211 eduino

    ccadic/HackZeGarage

    ESP32-S2 and CC1101S 433Mhz usb stick to record and send car gates/garages data keys and open stuff

    33 parts19
  • 2 layers45.7 × 63.5 mmFeuchtraumabzweigdose, the printed circuit board in 3D

    Feuchtraumabzweigdose

    transportkollektiv/feuchtraumabzweigdose

    A custom GPS Tracker with LoRaWAN/TTN intended for use on a bicycle

    40 parts14CC-BY-4.0

Questions

How big is the Mfo PCB?

It measures 19 × 15.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mfo use?

21 parts, built around the TLV75733PDBV and TPS78218DDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mfo KiCad files?

From the owen-rp2a03/mfo repository on GitHub, at the commit this page was made from: the board is mfo.kicad_pcb and its schematic mfo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mfo design in my own project?

Its repository states no licence, so its author keeps all rights: ask owen-rp2a03 before reusing the design.