
Rp2350a testing
74th/rp2040-dev-board
治具には、中心から縦、横それぞれ 0.05 インチ単位で 0.200.50 インチ(1.27mm 単位で 5.08mm から 12.70mm)離れたとこにピンヘッダの固定用の穴が空いています。

Raspberry Pi Pico 2W in a Raspberry Pi Zero formfactor
CustomPico is an open-source printed circuit board by otho-dll, from the otho-dll/ANUlab_Z-Blade repository on GitHub. It is a 2-layer board of 65 × 30 mm with 51 parts on 69 nets, routed with 789 tracks and 136 vias.
It is built around the RP2350A, W25Q128JVSIQ and AMS1117. Its parts include 19 capacitors, 14 resistors, 4 ICs, 2 connectors and 2 switches. It belongs with the RP2350 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C8, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C5, C19 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R4, R6 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C6, C7, C9 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R13 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R5, R11 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW3 |
| 1 | 12MHz | ExtFootprints:crystalOscilator-12mm_width | X1 |
| 1 | 3.3u | ExtFootprints:WE-PMCI_0806 | L1 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | <value> | ExtFootprints:rpi_rmc20452t | U4 |
| 1 | AMS1117 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | G*** | kibuzzard-6A7ED207 | kibuzzard-6A7ED207 |
| 1 | G*** | kibuzzard-6A7EC9C0 | kibuzzard-6A7EC9C0 |
| 1 | G*** | kibuzzard-6A7EC9C8 | kibuzzard-6A7EC9C8 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | R | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | RP2350A | ExtFootprints:RP2350A_QFN-60_EP_7.75x7.75_Pitch0.4mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | W25Q128JVSIQ | ExtFootprints:SOIC127P600X175-8N | U3 |

74th/rp2040-dev-board
治具には、中心から縦、横それぞれ 0.05 インチ単位で 0.200.50 インチ(1.27mm 単位で 5.08mm から 12.70mm)離れたとこにピンヘッダの固定用の穴が空いています。


profdc9/PicoAlt2
An alternative Pi Pico 2 (RP2350) type board you can have made yourself.

ROAR-QUTRC/perseus-v3
The code base for the QUT Robotics Club ROAR teams rover Perseus starting 2026

mikesmitty/power-manifold
Six-port USB-C power supply: up to 100 W per port from one 24 V supply, with per-port control, priority-based power sharing and Home Assistant support. 100% local, no cloud required.


engelberd/sensor-system
Working notes for the first custom RP2350A board with ADXL355, USB-C development power/data, 12 V field input, RS485, and a power architecture biased toward a clean accelerometer supply.

gianluca-rainis/UHBadge
Universal Hacker Badge - The ultimate badge for hackers.
It measures 65 × 30 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the RP2350A, W25Q128JVSIQ and AMS1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the otho-dll/ANUlab_Z-Blade repository on GitHub, at the commit this page was made from: the board is 2 - PCB/customPico/customPico.kicad_pcb and its schematic 2 - PCB/customPico/customPico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask otho-dll before reusing the design.