

Register sp
Educational 8 bit CPU
- Size
- 90 × 45 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 66
- Pads
- 272
- Tracks, vias
- 748, 340
- Pours
- 565
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Feb 2026
- Updated
- 2 Nov 2026
Overview
Register sp is an open-source printed circuit board by ostertag, from the ostertag/edu8 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 90 × 45 mm with 59 parts on 66 nets, routed with 748 tracks and 340 vias.
It is built around the 74HC245D, 74HC157D and 74HC283P-E, with the 74HC02, 74HC08D and 74HC377D among its other parts. Its parts include 15 resistors, 12 diodes, 9 capacitors, 8 ICs and 2 connectors.
Main components
674HC245D
SO-20-300mil-40℃~+125℃ 1 160uA 2V~6V 7.8mA 7.8mA 74HC 8 9ns@4.5V,50pF Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HC157D
SO-16-40℃~+125℃ 10ns@6.0V,50pF 160uA 2V~6V 5.2mA 5.2mA 74HC 8/4 Multiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers74HC283P-E
-- Specialty Logic ROHSRenesas ElectronicsSpecialty Logic74HC02
-- Logic Gates ROHSonsemiLogic Gates74HC08D
SOP-14-40℃~+125℃ 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV 2 27ns@4.5V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series AND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC377D
SO-20-300mil-40℃~+125℃ 1 12ns 16ns@4.5V,50pF 2V~6V 3.5pF 3ns 4mA 4mA 74HC Series 77MHz 8 8uA D-Type Enable Rising Edge SOIC-20-300mil Flip Flops ROHSNexperiaFlip Flops
README
README.mdedu8
Educational 8 bit CPU
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2, TP3, TP4 |
| 4 | ToolingHole | MountingHole:ToolingHole_1.152mm | H3, H4, H5, H6 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R13, R14, R15 |
| 2 | 74HC157 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 2 | 74HC283 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U3, U4 |
| 2 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 74HC02 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U7 |
| 1 | 74HC08 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U8 |
| 1 | 74HC245 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2 |
| 1 | 74HC377 | 8-bit_computer:SO-20_5.3x12.6mm_P1.27mm | U1 |
| 1 | Conn_01x20_Pin | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Horizontal | J1 |
| 1 | DEC | LED_SMD:LED_0805_2012Metric | D12 |
| 1 | INC | LED_SMD:LED_0805_2012Metric | D11 |
| 1 | LOAD | LED_SMD:LED_0805_2012Metric | D9 |
| 1 | OUT | LED_SMD:LED_0805_2012Metric | D10 |
| 1 | Val** | 8-bit_computer:by-nc-sa.eu | Ref** |
More from ostertag/edu8
8- 2 layers

- 2 layers100 × 60 mm

- 2 layers100 × 70 mm

- 2 layers100 × 50 mm

- 2 layers80 × 40 mm

- 2 layers70 × 39 mm

- 2 layers75 × 28 mm

- 2 layers100 × 70 mm

Similar boards
- 2 layers245.1 × 160 mm

8-Bit CPU 32k
slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.
139 parts326 - 2 layers99.6 × 59.9 mm

ALU
benanderman/spork-8
An 8-bit CPU, made with TTL chips on custom, modular PCBs. Includes board designs, and Arduino code to program its instruction set and programs.
44 parts61MIT - 2 layers101.6 × 55.9 mm

Alu advanced
ifilot/sap-smd
Modular 8-bit computer built with TTL logic units to create a "Simple as Possible" system
51 parts2CERN-OHL-S-2.0 - 4 layers158.8 × 104.1 mm

- 2 layers299.7 × 198.1 mm

Cisc-8
nailed-barnacle/Cisc-8-ttl-processor
A cut-down version of the 8080 processor using HCTTL and including a discrete ALU and instruction decoder
319 parts1MIT - 2 layers208 × 110 mm

- 2 layers110 × 45.5 mm

P2000t ram expansion board-128kb smd
ifilot/p2000t-ram-expansion-board
RAM expansion board for the P2000T
25 parts1 - 2 layers178 × 711 mm

Questions
How big is the Register sp PCB?
It measures 90 × 45 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Register sp use?
59 parts, built around the 74HC245D, 74HC157D, 74HC283P-E and 74HC02. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Register sp KiCad files?
From the ostertag/edu8 repository on GitHub, at the commit this page was made from: the board is CAD/register_sp/register_sp.kicad_pcb and its schematic CAD/alu/alu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Register sp design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).