Skip to the content
4 layers86 × 53 mmIcE1usb, the printed circuit board in 3D

Osmocom open source E1 (TDM) hardware; mirror of https://gitea.osmocom.org/retronetworking/osmo-e1-hardware

Size
86 × 53 mm
Copper layers
4
Thickness
1.6 mm
Parts
121
Nets
157
Pads
542
Tracks, vias
1,527, 181
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
4 Sep 2020
Updated
22 Nov 2024

Overview

IcE1usb is an open-source printed circuit board by osmocom, from the osmocom/osmo-e1-hardware repository on GitHub. It is a 4-layer board of 86 × 53 mm with 121 parts on 157 nets, routed with 1,527 tracks and 181 vias.

It is built around the ICE40UP5K-SG48I, MAX-M8W-0 and W25Q80DVSNIG, with the IP4220CZ6, 74HC595 and MIC5504-1.2YM5-TR among its other parts. Its parts include 39 capacitors, 28 resistors, 12 ICs, 8 fuses and 5 connectors. It belongs with the FPGA and CPLD boards of this library.

Main components

9

README

README.md

osmo-e1-hardware - Collection of various E1/TDM hardware projects

This repository contains a variety of different projects related to E1/TDM hardware interfaces

icE1usb

The Osmocom icE1usb project is an open source hardware, gateware and firmware project implementing a USB-attached interface for E1 circuits. Use this if you want to implement a system speaking to an E1 circuit, such as

  • a GSM BSC (using OsmoBSC) talking Abis/E1 to a GSM Base station,
  • using osmo-gbproxy to convert classing Gb/E1 to Gb/IP
  • talking to legacy ISDN PRI equipment such as PBX, RAS servers, etc.
  • connecting legacy ISDN PRI equipment such as PBX, RAS servers, etc. to the OCTOI comminity TDMoIP network

Depending on your USB host controller, it supports one or two E1 circuits. Most host controllers can only support one E1 circuit.

In order to provide a stable E1 clock reference, it contains a GPS disciplined oscillator.

See https://osmocom.org/projects/e1-t1-adapter/wiki/IcE1usb for more details.

Fully assembled units can be purchased at the sysmocom webshop

Check the hardware/icE1usb, firmware/ice40-riscv/icE1usb directories in this repository.

The host software is provided either

osmo-e1-tracer

This is a fully integrated design that allows you to obtain bi-directional high-impedance bitstream E1 traces. It features an iCE40 FPGA with USB + E1 cores from Sylvain Munaut, as well as two E1 LIUs.

See https://osmocom.org/projects/e1-t1-adapter/wiki/E1_tracer for more details.

Fully assembled units can be purchased made-to-order from sysmocom.

Check the hardware/e1-tracer, firmware/ice40-riscv/e1-tracer and software/e1-tracer directories in this repository.

osmo-e1-xcvr

This was a simple hardware project that aims to generate a reusable module for interfacing E1/T1/J1 lines from various custom FPGA/CPLD/microcontroller projects. Consider it part of an earlier R&D setup before icE1usb and osmo-e1-tracer were around.

The board contains transformers, the analog circuitry, the LIU (line interface unit), an oscillator as well as an integrated transceiver chip.

It exposes the control interface (SPI) as well as the decoded synchronous Rx/Tx bitstreams each on a 2x5pin header.

Framer, Multiplexer, HDLC decoder or anything like that is out-of-scope for now. The idea really is to provide an interface as low-level as possible.

One of the ideas is to create a "soft E1" interface, where the Rx/Tx bitstreams are interfaced with the SSC of an AT91SAM3S and subsequently passed into a PC via USB. The 2Mbps signal is very low-bandwidth, so that a pure software implementation should be absolutely no problem for todays computing power.

See https://osmocom.org/projects/e1-t1-adapter/wiki/Osmo-e1-xcvr for more details

Check the hardware/e1-xcvr directory in this repository.

osmo-e1-tap

This is a small passive board that allows you to perform high-impedance tracing on an E1 or T1 line.

Fully assembled units can be purchased at the sysmocom webshop.

Check the hardware/e1-tap directory in this repository.

Parts

121
QtyValueFootprintReferences
28100nCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C25 +12
111uCapacitor_SMD:C_0603_1608MetricC5, C10, C11, C24, C26, C27, C28, C29, C30, C31, C32
8300mAFuse:Fuse_0603_1608MetricF1, F2, F3, F4, F5, F6, F7, F8
85k1Resistor_SMD:R_0603_1608MetricR2, R3, R6, R8, R13, R14, R24, R25
527RResistor_SMD:R_0603_1608MetricR12, R16, R17, R27, R28
5IP4220CZ6Package_SO:TSOP-6_1.65x3.05mm_P0.95mmU2, U6, U7, U11, U12
40RResistor_SMD:R_0603_1608MetricR20, R21, R22, R23
410kResistor_SMD:R_Array_Convex_4x0603RN4, RN5, RN7, RN8
41k5Resistor_SMD:R_0603_1608MetricR5, R7, R10, R11
433RResistor_SMD:R_Array_Convex_4x0603RN1, RN2, RN3, RN6
3120RResistor_SMD:R_0603_1608MetricR4, R15, R26
3Fiducial_1mm_Mask2mmFiducial:Fiducial_1mm_Mask2mmFID_BL, FID_BR, FID_TR
291kResistor_SMD:R_0603_1608MetricR1, R9
2NT/TEConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ4, J5
2PULSE_T1094NLs47-misc:PULSE_BHTR1, TR2
110RResistor_SMD:R_0603_1608MetricR18
130M72s47-misc:Oscillator_SMD_VCXO-6Pin_7.0x5.0mm_P2.54mmU4
1330RResistor_SMD:R_0603_1608MetricR19
147nInductor_SMD:L_0402_1005MetricL1
174HC595Package_SO:TSSOP-16_4.4x5mm_P0.65mmU3
1BatBypasss47-misc:J_NC_0603_30JP1
1DONELED_SMD:LED_0603_1608MetricD2
1E1Connector_RJ:RJ45_Amphenol_RJHSE538X-02X5
1EXT_INConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ2
1EXT_OUTConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ1
1GPIOConnector_RJ:RJ45_Amphenol_RJHSE5380X3
1GPSs47-conn:SMA_TEConnectivity_619540-1_HorizontalX1
1GPS SCLs47-misc:J_0402JP3
1GPS SDAs47-misc:J_0402JP2
1ICE40UP5K-SG48Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mmU1
1LightPipes47-misc:LUMEX_LPF-C011303SLP1
1MAX-M8Ws47-misc:ublox_MAXU8
1MIC5504-1.2YM5Package_TO_SOT_SMD:SOT-23-5U9
1MIC5504-3.3YM5Package_TO_SOT_SMD:SOT-23-5U10
1PESD0402-140Diode_SMD:D_0402_1005MetricD3
1SDM02U30LP3Diode_SMD:D_0603_1608MetricD4
1SPIConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ3
1STATUSs47-device:LED_RGB_2020D1
1SW_Pushs47-misc:SW_HYP_1TS003BSW1
1Serials47-conn:Jack_2.5mm_CUI_SJ-2523-SMT_HorizontalX2
1USBs47-conn:USB_C_Receptacle_HRO_TYPE-C-31-M-12X4
1VL-1220/VCNBattery:Battery_Panasonic_CR1220-VCN_Vertical_CircularHolesBT1
1W25Q80Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5

More from osmocom/osmo-e1-hardware

2
  • 4 layers100 × 132.5 mmIcE1usb panel, the printed circuit board in 3D

    IcE1usb panel

    osmocom/osmo-e1-hardware

    Osmocom open source E1 (TDM) hardware; mirror of https://gitea.osmocom.org/retronetworking/osmo-e1-hardware

    240 parts9
  • 4 layers37.5 × 32.5 mmIcE1usb rs422, the printed circuit board in 3D

    IcE1usb rs422

    osmocom/osmo-e1-hardware

    Osmocom open source E1 (TDM) hardware; mirror of https://gitea.osmocom.org/retronetworking/osmo-e1-hardware

    52 parts9

Similar boards

  • 4 layers17.8 × 50.8 mmIce40-dip40, the printed circuit board in 3D

    Ice40-dip40

    esynr3z/ice40-dip40

    Lattice iCE40 Ultra/Ultra+ breakout DIP40-like board

    47 parts5
  • 2 layers60.5 × 40.1 mmPROGLOG01, the printed circuit board in 3D

    PROGLOG01

    mlab-modules/PROGLOG01

    Small low-power open-source toolchain compatible FPGA

    66 parts1
  • 4 layers89.7 × 82.9 mmICE40UP5K logic analyzer rev2, the printed circuit board in 3D

    ICE40UP5K logic analyzer rev2

    hack-a-tack/FPGA_Logic_Analyzer

    (Info applies to rev. 1, update for later revisions (only final rev. matters in the README)) FPGA-based 8-channel logic analyzer implemented on iCE40UP5K.

    170 parts
  • 2 layers53.8 × 53.1 mmObd32, the printed circuit board in 3D

    Obd32

    mkrasselt1/obd32

    Anyone is free to join our goal to make the hardware reliable and affordable.

    79 parts4
  • 2 layers50 × 77.5 mmGPS board v3, the printed circuit board in 3D

    GPS board v3

    MatthewBoeding/GPSboard

    Lab 2 for ECEN-435 design files. Will update as necessary.

    17 parts1BSD-3-Clause
  • 2 layers106.7 × 60.3 mmAvionicsBoard, the printed circuit board in 3D

    AvionicsBoard

    djmallek/CycloneRocketry

    Some work I do for CycloneRocketry

    72 parts1
  • 6 layers26.9 × 26.9 mmOpenFC, the printed circuit board in 3D

    OpenFC

    OpenDrone-hw/OpenFC-Lite-Mini

    Open-source Betaflight flight controller. RP2354A, 20x20 mm, 6-layer, 3-6S, CERN-OHL-S-2.0.

    131 parts147CERN-OHL-S-2.0
  • 6 layers37.9 × 37.9 mmOpenFC, the printed circuit board in 3D

    OpenFC

    OpenDrone-hw/OpenFC-Lite

    Open-source Betaflight flight controller. RP2354B, 30.5x30.5 mm, 6-layer, 3-8S, CERN-OHL-S-2.0.

    164 parts85CERN-OHL-S-2.0

Questions

How big is the IcE1usb PCB?

It measures 86 × 53 mm and has 4 copper layers, 1.6 mm thick.

What parts does the IcE1usb use?

121 parts, built around the ICE40UP5K-SG48I, MAX-M8W-0, W25Q80DVSNIG and IP4220CZ6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IcE1usb KiCad files?

From the osmocom/osmo-e1-hardware repository on GitHub, at the commit this page was made from: the board is hardware/icE1usb/icE1usb.kicad_pcb and its schematic hardware/icE1usb-rs422/icE1usb-rs422.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IcE1usb design in my own project?

Its repository states no licence, so its author keeps all rights: ask osmocom before reusing the design.