

Rpiampdacv1
Electronics Projects
- Size
- 65 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 47
- Pads
- 116
- Tracks, vias
- 150, 9
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Apr 2024
- Updated
- 14 May 2026
Overview
Rpiampdacv1 is an open-source printed circuit board by orri93, from the orri93/electronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 65 × 56.5 mm with 32 parts on 47 nets, routed with 150 tracks and 9 vias.
It is built around the LM358, CAT24C256LI and 132203RP. Its parts include 10 resistors, 4 capacitors, 3 ICs and 3 connectors.
Main components
3LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierCAT24C256LI
PDIP-81,000,000 cycles 1.8V~5.5V 100 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C PDIP-8 EEPROM ROHSonsemiEEPROM132203RP
插件-65℃~+165℃ 1 12.4GHz 375V 50Ω Board Side RP-SMA 插件 Coaxial Connectors (RF) ROHSAmphenolCoaxial Connectors (RF)
README
README.mdelectronics
A personal collection of electronics projects, experiments, and reusable design assets.
This repository includes circuit designs (mostly KiCad), component libraries, simulation files, prototypes, firmware/code, and supporting documentation. It is organized as a working archive where each project can include one or more of the following:
- Hardware design files (schematics and PCB layouts)
- Build/manufacturing outputs (for example gerbers)
- Notes, references, and datasheets
- Source code or firmware when the project includes programmable parts
Folder Structure
Top-level folders are grouped by purpose. Common locations include:
circuits/: Main project folders for KiCad designs (schematics/PCBs).doc/: Documentation, references, datasheets, books, project notes, and how-to material.src/: Source code and firmware-related project code when applicable.3d/: 3D models (for example STEP files) used for PCB/mechanical integration.symbols/: KiCad symbol libraries.footprints/: KiCad footprint libraries.gerber/: Generated manufacturing outputs for selected projects.spices/: SPICE/LTspice simulation files.prototype/: Early-stage prototypes and exploratory files.projects/: Additional project work that may not fit the maincircuits/layout.media/: Images and other media assets.pcb/: Standalone PCB-related utilities or adapter boards.tools/: Tooling and utility resources.repares/: Repair-related project material.tmp/: Temporary files.
Project Organization Notes
Project contents are not always in a single folder. Depending on the project stage and history:
- KiCad circuit files are often located under
circuits/<project-name>/. - Documentation can be stored separately under
doc/. - Code or firmware is sometimes placed under
src/.
This split keeps hardware design, documentation, and software concerns organized while still allowing each project to evolve over time.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 3.9k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4 |
| 4 | ID_WP | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 2 | 0.1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3, C4 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R7 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | SDA | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP3, TP4 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 12k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 132203RP | gos:COAX4GND_132203RP_AMP | J3 |
| 1 | 1k | gos:TRIM_3352T-1-102LF | R9 |
| 1 | 47k | gos:TRIM_3352T-1-102LF | R10 |
| 1 | Analog | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | CAT24C256 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | LM358 | Package_DIP:CERDIP-8_W7.62mm_SideBrazed_LongPads_Socket | U3 |
| 1 | MCP4725xxx-xCH | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | SCL | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
More from orri93/electronics
12- 2 layers148.8 × 126.2 mm

- 2 layers193.8 × 120 mm

- 2 layers100 × 100 mm

- 2 layers85.3 × 39.4 mm

- 2 layers93.5 × 67.3 mm

- 2 layers56.6 × 57.7 mm

- 2 layers60.5 × 84.1 mm

- 2 layers58.7 × 47.8 mm

- 2 layers68.6 × 53.3 mm

- 2 layers83.6 × 51.8 mm

- 2 layers56.6 × 57.7 mm

- 2 layers56.6 × 57.7 mm

Similar boards
- 2 layers65 × 76 mm

Raspi HAT
4rynv/VacDepoctrl
Open source firmware for a automation of vacuum systems controlled using Raspberry pi
36 parts1 - 6 layers160 × 100 mm

- 2 layers65 × 56.5 mm

- 2 layers

- 4 layers158.8 × 104.1 mm

- 4 layers205.5 × 152 mm

- 4 layers91.7 × 66.8 mm

Pico expansion board
eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project
68 parts18GPL-3.0 - 2 layers71.2 × 22.6 mm

NullWiiCon v2
nullstalgia/NullWiiCon
AVR Firmware to convert Nintendo Extension port controllers to USB for use on Switch and PC
56 parts9GPL-3.0
Questions
How big is the Rpiampdacv1 PCB?
It measures 65 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rpiampdacv1 use?
32 parts, built around the LM358, CAT24C256LI and 132203RP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rpiampdacv1 KiCad files?
From the orri93/electronics repository on GitHub, at the commit this page was made from: the board is circuits/rpiampdacv1/rpiampdacv1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rpiampdacv1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).